The Lee-Tseung Lead Out Theory

[ltseung888]

Congratulations @ltseung888 !!!

I will like to have the correct information in order to replicate your lead out configuration.

Jesus

Our plan is to produce a DIY educational kit.  This lead-out energy machine requires top designers, top drafts persons and exact material.  The Students took 8 weeks with the design specification and built a prototype that cracked.  Mr. Tong Po Chi took 1 day and rebuilt it. 

You already have the basic draft design information from the many posts from me.  The top experts such as Tong could build working prototypes from that information.  The Students could not.  I do not want people in this Forum complaining that my design does not work.  So please wait until we have our DIY Educational Product.  The plan is to have it ready by Chrismas this year.

The prototype for the Chinese Government is being built.  It will be the 5th generation.  Hopefully, it or an improved version will be on World TV soon.  I hope that it will be started by the fingers of the Presidents of All Nations. 

[nievesoliveras]

Our plan is to produce a DIY educational kit.  This lead-out energy machine requires top designers, top drafts persons and exact material.  The Students took 8 weeks with the design specification and built a prototype that cracked.  Mr. Tong Po Chi took 1 day and rebuilt it. 

You already have the basic draft design information from the many posts from me.  The top experts such as Tong could build working prototypes from that information.  The Students could not.  I do not want people in this Forum complaining that my design does not work.  So please wait until we have our DIY Educational Product.  The plan is to have it ready by Chrismas this year.

The prototype for the Chinese Government is being built.  It will be the 5th generation.  Hopefully, it or an improved version will be on World TV soon.  I hope that it will be started by the fingers of the Presidents of All Nations.

Thank you @ltseung888 !
I understand.

Jesus

[Top Gun]

http://www.youtube.com/watch?v=jFS-e2R67u0

The absolute proof of Overunity Lead-Out Energy Prototype can be seen in the above video.

The confirmation figures will follow in the next few weeks.

We can now confidently claim that the 225 HP Pulse Motor is no hoax.  We can produce and test the >0.5 HP prototype in the garage of Mr. Tong Po Chi.

Improvement is being added.

The prototype was successful not because of luck.  It was solid and vigorous scientific work.  Most of the attempts of the various designs discussed in this and similar forums failed because they did not have the following:

1.   The Lee-Tseung Lead-Out Theory to guide them.  With the Lead-Out theory, the energy source is clearly identified as gravity or electron motion.  To have the highest efficiency, the Lead-Out theory demands high but appropriate pulse rate, high but appropriate pulse current, multiple and controllable number of pulse coils, matching magnets (that can be found with the Dr. Ting test), etc.

2.   High precision engineering.  The distance between the coils and the rotating magnets was specified to be 2 mm.  The angle of the magnets could be tilted and adjusted to within 2 degrees.  The coils needed to be approximately 6 ohms and wound properly.  (The Students found that a loose, randomly wound coil produced much less magnetic repulsion.)  They also found that a slight violation of the 2mm gap in a rotating and vibrating environment would crack their device.

3.   The capability to increase the dimensions of the device.  Most forum members go for the smallest dimensions for their test prototypes.  The best torque and efficiency comes with higher wheel diameter, more magnets and more separation of the magnets.  We started with 300mm diameter and found that we could not put in the 16 magnets as designed.  The video shown used 3 coils but the result was powerful enough to demonstrate overunity.

4.   The lack of proper funding.  The video clearly showed that the prototype was developed at the garage of Mr. Tong.  It was treated as a hobby and developed on an “as time and resources permit” basis.  This will most likely change after the Chinese or other Governments have given it their official blessing.

5.   The lack of dedication and confidence.  Many Students dropped out after the smallest setback.  The initial number of “interested” students was more than 10.  After 8 weeks, the number dropped to 3.  After the cracking of the prototype, Mr. Tong took over completely.  Some of the feedback included: the project required mathematics and physics; the project was boring; there were constant changes in design and specification; we had to go out and purchase materials ourselves; we had to make decisions on the dimensions and even types of screws; there was a need to use electrical tools that might be dangerous; the tolerance of the components were too rigorous; we are not professional machinists etc.

[chrisC]

http://www.youtube.com/watch?v=jFS-e2R67u0

The absolute proof of Overunity Lead-Out Energy Prototype can be seen in the above video.

The confirmation figures will follow in the next few weeks.

We can now confidently claim that the 225 HP Pulse Motor is no hoax.  We can produce and test the >0.5 HP prototype in the garage of Mr. Tong Po Chi.

Improvement is being added.

Wow! Earth shattering announcement of real free energy via Youtube! Sad to say much junk is also announced on Youtube, including bad quality magic shows and delusional achievements by wannabe lack of knowledge 'scientist' !

Seemed like not one person of any known scientific community is even interested!
Which tells you .....
You figure that one out Mr. Tseung.
It's not rocket science.

cheers
chrisC

[TinselKoala]

You are silly. That's not a free energy prototype, THIS is a free energy prototype.

http://www.youtube.com/watch?v=AX-jrlGC-aA

The absolute proof of Overunity Lead-Out Energy Prototype can be seen in the above video.

The confirmation figures will follow in the next few weeks.