Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


Single Wire Tests

Started by duff, October 31, 2007, 03:42:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 33 34 35 36 37 ... 42
User actions

Bruce_TPU

#170
January 27, 2008, 12:05:53 PM
Good morning All,

Some one wire experiments, that need to be run.  Including one of Marco's that still has not been tested.

ALSO, I have made a flow chart circuit for the 3 stack tpu.  Just an idea to test, for those who have wound theirs already.

My Litz has come in.  675 strands, individually insulated.  Very small wire. 

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

jeanna

#171
January 27, 2008, 02:14:59 PM
My apologies, Bruce,
It is the reason the first one was a little gif.
I did think people doing this should see a picture taken from nature that I have never seen anywhere else.
jeanna

scotty1

#172
January 27, 2008, 06:34:51 PM
Hi all....
These kicks you all talk about are so easy to explain.
It has nothing to do with electrons!!
It has nothing to do with collapsing fields.
It has to do with angular displacement.
It has to do with the capacitance of a wire.
Push a coil with a light bulb connected through a U shaped magnet....do it slowly and you will have no light....now do it quickly and you will have light.
This shows that the TIME is important.
When you approached the U magnet with the coil...the U magnet was loosing its strength...but when the coil breaks away from the U magnet..the U magnet is recharged from the air or the Earth's magnetic field....ready for the next start....
Your a/c power lines are similar....during the time of no pressure the wires are slightly charged in a capacitive way from the Earth...it is one of the reasons a/c can run so far....
In the a/c the pressure is rising and falling steadily so things remain fairly stable....but as Henry Moray says...."When you put a substance under pressure and then set it free"....the scene is much different....angular displacement towards capacitive state occurs instantly......but during that small amount of TIME there is alot going on in the wire.
It is the reason your CEMF is at a higher voltage.
It is the reason for all the wonderful effects of Tesla coils and disruptive discharges.
As the coil approaches the center of the U magnet...the running current stops..no pressure....but the coil wire and core are full of magnetic lines of force...at the max limit in fact.....ALL THE FLUX IS DIRECTED ACCROSS THE WIRES.....
We want the force to run along the wires....not accross them.
As soon as the coil moves away from the U magnet center, the current reverses until all the flux in the core is pushed into the wires.
----------------------------------------------
By the way...for those who are experimenting....do not overlook those pictures i loaded...
The forms in those pics of mine are what you use to start your car everyday.....without those forms...you would have no electricity......
Read about magnetic currents....then you will know what electricity is......then you will know what my pics are......they are more interesting than anyone can see.... ;)
People aks for hi res...then complain about it....  funny place  ???
Scotty.

Bruce_TPU

#173
January 28, 2008, 07:29:44 AM
Good morning All,

Three of the "proper" frequencies will never be enough.  They must be "driven" with a triode tube, (to start with.  It is more than just the speed of the tube, it has to do with the harmonics naturally on the output of the triodes signal.)  head long at one another.  A separate battery (power supply) for each, slightly out of phase.  Identical signals.  I would test with the infamous 245 Khz.  One of SM's given frequencies and the frequency at which lightning is formed.

The following is a repost from June 22, 2007 of two experiments mentioned by Thaelin. My comments are in (^)

Experiment #1
If you want to see this in real time, take two signal gens positive leads only. One small hobby motor and wire it to both gens. Now set the frequency's low but slightly off each other (slightly out of phase) and watch the motor rev up and down as the frequencies counter act each other.

Experiment #2
I have a bifilar coil from other things wound with a lot of wire. I put a small ninety degree coil through the center and hooked up two signals. Well not much. then I moved one of the signals to the output end and the scope went nuts.(identical signals opposing one another, different power supply's, slightly out of phase.)   Good way to see it too.

Link:  http://www.overunity.com/index.php/topic,2300.msg36492.html#msg36492

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

hansvonlieven

#174
January 28, 2008, 11:37:28 AM
Quote from: Bruce_TPU on January 28, 2008, 07:29:44 AM
Good morning All,

Three of the "proper" frequencies will never be enough.  They must be "driven" with a triode tube, (to start with.  It is more than just the speed of the tube, it has to do with the harmonics naturally on the output of the triodes signal.)  head long at one another.  A separate battery (power supply) for each, slightly out of phase.  Identical signals.  I would test with the infamous 245 Khz.  One of SM's given frequencies and the frequency at which lightning is formed.


This is interesting Bruce,

245 KHz is the 16th octave harmonic of the Schumann frequency if you accept this at approx 7.48 Hz. It is also very close to Keely's scale of B-flat depending on which concert pitch you use (we do not know which concert pitch Keely used as A=440 as an accepted standard is of much more recent origin)

You mention several frequencies given by SM, would you please so kind as to let me have them, I would like to analyse this further.

Hans von Lieven
When all is said and done, more is said than done.     Groucho Marx
Print
Go Up Pages 1 ... 33 34 35 36 37 ... 42
User actions