The TPU uncovered? (A PROBABLE technique.)

[buzz-ard]

@Paul, gn0stik, tish

Check out this link http://lucianarchy.proboards21.com/index.cgi?board=futuretalk&action=print&thread=1854. I spent about two hours this morning reviewing some of Stan Deyo's stuff, and all sorts of things clicked for me. It's got me thinking about the TPU in a whole new way.

[kron]

Hello all,
How things can change...I was a lurker on this forum for soo long and now I'm posting for the second time today. lol.Anyway.
I had to reread all the TPU related posts all day long and one min ago I've just finished one pdf titled "Steven_Mark_TPU_compilation.pdf".Some ppl here think that all that could be just BS but please reread that paper and then just think again.He stated that he allready gave Lindsay all clues he needed to replicate the device and know what ?I really think he did.All his clues about how the device work would make sense if and only if we move a virtual magnet(or more) at the speed of light and/or even faster.Don't think right now about the configurations of his tpu's ,I'm certain they were genuine, there are many ways to achieve a result once one understand the principle behind.And that would be simply the relativity.No magic ,no BS, just that.
There is much more to say but my eyes are stinging so i have to take a break.


Kron

[replicator]

Yes!!! I read this forums every day, but I think you are on the right way. I am not a clever guy, but I just feel it. Why? Just here is a yet another working theory...
---
1.) From Floyd Sparky Sweet(VTA), 1988, http://jnaudin.free.fr/vta/index.htm
"... Since any capacitor behaves similarly to a transmission line it is no more necessary to postulate a
displacement current for the capacitor than it is necessary to do so for a transmission line. The
excision of ``displacement current'' from electromagnetic theory has been based on arguments
which are independent of the classic dispute over whether the electric current causes the
electromagnetic field, or vice versa. ..." This statement should be very important. Why? There are capacitors everywhere, like between wingdings of a coil, circuits, TPU wounding, etc... We should start to thinking about capacitors as transmission lines.

2.) Rotating magnetic field maybe not a rotating magnetic field. It would be a electric wave via a transmission line. Just imagine a coaxial cable loop, with an external magnetic inductor which induces a "kick" in one of the part of that loop. The induced signal start to travel near the speed of light to the both of direction in the coaxial cable's internal dielectric. We should solve the problem of direction of trailling "kick" then the result will be a rotating field inside the cable with the speed of light. Standing waves aren't rotating fields, just think what is standing wave, it a reflection from the endpoint of a transmission line.

3.) By today laws we cannot make rotating magnetic field more than a speed of light. Just count and use axioms of aether's two parameters: . "... The essence of space is time, not distance, and only one propagation  velocity is possible through a segment of space. Thus, time through a segment is  intimately related to the length of the segment..."

I guess that the TPU is an open system, a big, screwed moebius-like loop, no two different plates.
When we start to make 2-3-4 different coils, around it, drive with several amperes, mixture of different frequencies and a lot of wattage we shoot to a rabbit with a large gun. (sorry otto I respect your work but I should say that).
The mixture of frequencies makes a big chaos in the loop. Sometimes these are amplifies each other, sometimes make weaker, and the harmonics of square waves... oh men!
We cannot see the tree by the forest. No outside chaotic, rotating magnetic fields necessary, but a precisely driven, travelling pulse inside the loop.... (I on purpose don't want to know where the energy comes from..)

The question is what is to be hard to control?
Of course, an virtual knife which enables the trailing of the "kick" only one direction in the loop. To make it not so easy. As SM said. The other hard task to put energy into the loop and couple out for your 100W bulb without "killing" the effect, nevertheless keep the balance between each other...
If my theory right, It explain a lot of things like: enough very, very small amount of energy to start the process that will be self-exciting without energy extraction and it is easily runaway, heat, kill, etc...

sorry for that long message.
replicator

[tishatang]

@Paul
I posted here because this thread seemed the closest to my current line of thought.  I am currently in China and have limited internet access.  I don't wish to start another thread.  Thanks for accepting me here.

@buzz-ard
For the reasons stated above, I can't access the link you gave, sorry.

If I were on my home turf, this is what I would do:
Get one of my large ceramic circular magnets, about 3 inch diameter with a hole in the center.  They are called bucking magnets.  Available at some parts houses that sell speakers.  Or, tear apart an old broken large speaker for the magnet.
I would wind a flat coil to fit on top of the magnet.  I would try and get this coil to self resonate at 174.9 Khz. 
This is the supposed natural resonance of  ferro-magnetism.  SM stated that the dimensions of the coil were important.  Is this why?

See here:
http://rexresearch.com/mra/1mra.htm
Partial quote:

"Message 10094 (12/21/94 07:39)
From: Bob Paddock
To: Norman Wootan
Subject: (R) MRA

Another interesting thing that we verified tonight was that the natural ferro-magnetic frequency is approximately 174.9 KHz. This is a shot in the dark from my failing memory: I remember reading in my collection of one device that worked at 14.7 KHz.  I don't remember then name of it for sure, but it was the one made with the large basket weave coils (Hendershot maybe?), you've probably seen the thing it is one of the common lead gen devices in this field.174.9 KHz / 12 = 14.575 KHz. 14575 / 1944 = 7.49 Hz puts it down around the Schuman range. A harmonic interaction with the Earth field? This could account for the time of day effects.  Do you note significant changes at Sun Set and Sun Rise? Maybe this is significant, maybe it is not? "
************
The magnet will reinforce the coil to resonate at 174.9 Khz.  Sort of act like a crystal to give a stable frequency.  Only a small input signal at 174.9Khz can produce very high voltage, be careful! 
Now we can wind a control coil and an output coil at 90 degrees through the center for experimental purposes. 

Note:  We do not have to have a coil at 174.9 Khz to prove rotation.  It is something I think SM did.

Tishatang

 

[b0rg13]

Hello all,
How things can change...I was a lurker on this forum for soo long and now I'm posting for the second time today. lol.Anyway.
I had to reread all the TPU related posts all day long and one min ago I've just finished one pdf titled "Steven_Mark_TPU_compilation.pdf".Some ppl here think that all that could be just BS but please reread that paper and then just think again.He stated that he allready gave Lindsay all clues he needed to replicate the device and know what ?I really think he did.All his clues about how the device work would make sense if and only if we move a virtual magnet(or more) at the speed of light and/or even faster.Don't think right now about the configurations of his tpu's ,I'm certain they were genuine, there are many ways to achieve a result once one understand the principle behind.And that would be simply the relativity.No magic ,no BS, just that.
There is much more to say but my eyes are stinging so i have to take a break.


Kron

hmmm so lets see, in a nutshell we just need to make a rotating magnetic field( whats a good simple easy way to do this part) and simply place some wire/a collector of some kind to get power from it ?..like waving a magnet past a wire to light an LED ....?..

ok now some babbling from me,.....a 3 phase motor has a spining magnetic field that drags the rotor around with it? ( im not sure so im asking ), .. if this is the case cant we remove the rotor and add some kind of wire/collector to replace the rotor and draw some power from that and loop a little of it once its up to speed/power out put so it can be shut off at the wall and self run ?...

... yes befor you ask i have no idea what im talking about, im just guessing. shoot me.