Roll on the 20th June

[exxcomm0n]

Exx-

Just offering ideas for softening the wall and/or "suck back" past it....

I've been wondering what a setup like I proposed would do.. and am hoping you might try various configurations of that type and report your results. 

P.S. I enjoyed hanging out "with you" in your "lab" for 8 min.  tx for sharing

No worries man.

As you've seen I take myself WAY too seriously.

I will do more, try more, and post more.

Seriously though, I do appreciate suggestions, and I will try that tomorrow, bud.

Thank you for your compliment! I try to make it entertaining to make up for lack of content and the singing that makes your ears bleed.

[therealrasta]

No worries man.

As you've seen I take myself WAY too seriously.

I will do more, try more, and post more.

Seriously though, I do appreciate suggestions, and I will try that tomorrow, bud.

Thank you for your compliment! I try to make it entertaining to make up for lack of content and the singing that makes your ears bleed.

All good.. Nothing Wrong with 9 inch nails.

[Rusty_Springs]

the tinsel koal thing thing is a well funded hoax to draw you away from the wheel.

do you think i can take the bonnet of a ferrair and call it an new invention?? so mondrasek takes the attract mags of the wheel and most of the repel to one mag, and he invented something? what? what part of that did he design?

oh that right the spring clip, fucking please people, take your fingers and make a peace sign, that is the clip that is upposed to hold it up, and also hold it out.

now hold that shape over two line representing a tube, and try and get past it, you cant, if you hit the outer part it must push the hole thing out opf the tube, and when it comes back it will hit the furthest one first and the second wil dig into the side of the rod.and jam it there same if you start it the other way coming in, it will just jam coming in.

if you intend to steal an idea, at least have a knowledge of engineering and physics. as to tinsel koala, right wack for all your work, that guy is a talker and has never built anything, and you didnt recognise there was not one thing different other than stuff taken off the wheel??

no wonder you people never get anywhere, why dont you go with the genius rusty and someone build the flat track and run it on video, after all he is an expert he invented the mayernik effect, come on, lets see a flatt mag track run with poles face up like his pictures show them. after all the inventor orf the principal must at least be able to go up say a 30 dregree hill right, come on, what about ya rich mate rusty, ol give me the plans ive got the machines, surely he can build it for you, hey what about batman, he's got heaps of flat mags. no??? thought not, tried it clown, it does even run at all, not in any configuration. I told you poles face up is not only not the same in anyones book, it doesnt work because it cant, give you till monday then i will post the video of your fraud, yeah i filmed it dickhead.

Hey mondrasek may need your help and trigates after all nothing new here, why dont you piss off and help him, and take the koala with you.

anybody wanna buy a new "Mondrarri sports car" it's lighter than a ferrai so it goes faster, gunna lodge a patent for it. 

yep 100 pages into stupidity.

the weird part is the only things being built are copies of what i have already built, yet my word is worth shit? how the fuck do ya work that out. oh that right because mine are the only ones that showed results regardless of "any" other rant.

tinsels work looks just like clanzers work

what a clown!!

rusty the perfect name he chose for himself  in Australia rusty is short for rusty gun, someone who just wont fire, a cringer, a weak c...t, all mouth and no action.

Nothing to really respond to here, yet again more nonsence, you proved in your video a cylinder magnet can't roll along a block magnet well durrrrrrrr no one ever said it could if you learn to read I said two block magnets side by side, oh but in your world two block magnets can't go side by side, can someone that beleaves in Archer please show him how you put two block magnets side by side and while your at it show him how a cylinder magnet rolls along them, oh but wait someone already showed it and that was Exx in his video I'm sure he has block magnets side by side and his roller is going over them just the same as its going over the cylinder magnets and I could be wrong but isn't Exx using donut magnets as his roller, I say that because I thought he slid them onto his rotor arm again I could be wrong there, as for closing a loop I have never closed and loop and never said I have so why do you want me to show something I have never did or said I have done, opps yes I did do it once using an electromagnet but ofcause that doesn't count.
Learn to read and stop distorting peoples words to suit your agument, I know your upset you wasn't the first to come up with the onewaygate and its been tryed and tested years ago but all I can say is get over it and biuld your wheel that as people have pointed out already works, so the people that payed to see it working can see it or give there money back, telling them sorry I didn't really have a working model.

PS: To all Archer followers if my video proving the principle of my onewaygate did years ago is the same as Archers setup except for the type of magnets used is  fraud then that would mean in Archers thinking Exx's video is also a fraud because he has donut magnets rolling over block magnets setup side by side, just looking at Exx's setup is more proof my design is no different to Archers the only difference is I did it years ago, I don't give a stuff anymore except when I get attracted and people change the name but I have prove it enough so I'm not going into any more proof its there for all to see and test for themselves.

[gwhy!]

Good testing gwhy, but now I'm confused with your results on a level surface. With my three array (mixed iron/mag)  MkE, the roller in my previous pic makes it thru 70% of the time on a level surface with no tri-gate. When it didn't, no throwing back to the beginning just to the last of the array

Hi Larry,

I will have to check this out cos these no point looking at the same possible outcomes from to different arrays or maybe one or the other can be improved with a little pinch from the other array. Nice work and thanks for the info.

Batman made it thru all the time on a level surface with his drop off mags

sounds cool, I will have a look. thanks.

[johnagain]

Gday Archer

Many of us will willingly and gladly contribute  anything we can to further the cause

Unfortunately there are  many of  us who  do not have the Health Patience or Understanding of others

I may even say the Brains  to work this out for  themselves.
I may even say some of us are plain Dumb.

Even  young Joe Mayernick will probably need a bit of a hand with construction ???

Many of us have limited or little or no funds to construct our own  Swords Of God

You have been most understanding of these many facets and have worked long and hard to achieve a device for everyone

Many of us only have the brains to copy or replicate

Even though we have all  the information  that we need to build a Sword Of God This has obvisouly prevented  many starting  construction of their swords

Your trainlng has been awesome and you have taught much

The effort you have put into this is amazeing

Many believe in you Archer keep on keeping on

We are all greatfull to you Archer

A lot of us need the Baby,s  Security blanket of a completed working  machine and easy to replicate plans. 

So that even though many of us know it works! everyone will know it works!.

There is only one Archer Quinn

We can only watch and wait for you to say

?this is it here are the plans? 

as well as

?Build and it will work?.

Johnagain