Roll on the 20th June

[The Eskimo Quinn]

gotta love that gwhy, love how he avoided the 3 years claim due the last catch, but he forgets that all old posts stay here, shall we drag all of his questions about magnets and comments of what he thinks they can and cant do from the last "3 months"?

No we no longer waste our time with liars from oil companies, as always talk no proof

gwhy, rusty ou812  input from these guys? same ol same ol.

nothing new there

have a nice day ladies, keep trying though, God loves a trier.

(everyone else is welcome to look at them though. quick and easy for newbies, click on their name go to bottom of profile and click on last posts for history of posts, it saves trolling)

da da duh duh duh

another one bites the dust

[The Eskimo Quinn]

why make the nebies go through the pain of it all, thought i would save the trouble and keep my new polite self on track. welcome newbies, this is gwhy in the past. 4 months ago gwhy??? funny 3 weeks ago you didnt know anything about it.

Just watched vid5 again nope sorry don't agree. So the roller fell off the end but it was still grabbed, what would be good to see is if the roller surface was extended well beyond the end of the track and was shown to be level and then letting the roller come to rest under it own steam then It will show me if batmans track is a improvement on anything that I have played with or witnessed. 

Hi Archer,
   Just had a quick read of your site    Are you claiming that will be no limit to the length of your track that a roller can be transported without the use of anything else ? just using your track  or did I read it wrong.

I have my doubts about this ( but I am a newbee and still learning ). But I have been thinking about it real hard ( and now my head hurts  ) .  Just wish I had a large dia magnetized cylinder mag kicking around as  I already have have a fare few ferrite rods to play with, I think it would be very quick and easy to test the principle in a electric motor configuration as Rusty states.       

Hi Larry
I have just had a look at batmans vids they really do look impressive, but there are some questions that I feel need to be answered as the vids IMO may not show the full picture. This is not a negative post but just some observations that need to be considered. On vid 1,2 and 4 it can been seen that the track platform was rocking as the roller passed the center ( maybe this was intentional to gain momentum to put it out the other side of the track ) . Also the exit of the track was not that long before the roller dropped off the end so in this case we will never know if the roller will be pulled back into track, In vid 3 the roller fell off the track and was dropped the roller got stuck to the end of the track so IMO the setup shown in batmans vids shows nothing unusual unless I'm overlooking something ( which is a big possibility ). If I was to video the setup I am looking at now on that very plateform that batman was using ( complete with the rocking motion )  I think you will be blown away as there is a lot more pull and push which means one hell of a lot of speed but when placed on a flat stable surface it don't look to impressive but it do work and also once the roller has been thrown clear of the track which as I say in the few test that I have done is about 40-45% of the runs the roller do not get pulled back onto the track while still travelling on the same plane. This 40-45% maybe more like 55-60% because you may recall that in reverse the success rate was 70-80% which may mean that my level surface was not quite level  . There is a lot more testing and tweeking to do.

Hi Everyone,
As regards LarryCWheel. Nice BUT I have been playing around with this design for a few weeks now ( and before anyones say YOUR AFTER THE CREDIT,  I am not ) I made a few observations that need to be said. I started using this design with the smot arrangement on a 2 arm arrangement just to see if the concept would work it didn't because the sticky point at the end of the track was to great to release the roller but the climb from the roller was quite impressive. So then I went to using tri-gates ( now this isn't to start a smot/tri-gate war part 2 either, bear with me here). The Tri-gate arrangement do not suffer from the sticky point at the end if set up correctly but the down side was the climb from the roller was to say at best very poor but it did climb. Then came the Archer Smot ( don't know what else to call it at the mo ) so I set that arrangement up onto my setup but again the sticky point at the end was to great to release the roller. Now I did try a heavier roller to see if it just may be enough to drop away from the track ( which it didn't ) thats not saying that it can't be done with very carefull tuning of the track and roller weight, its just that "I" did dismiss it rather quickly because I was getting  better result using tri-gates. I have just acquired some more building materials to try and make a tri-gate version ( IMO the tri-gate version will work ) with more arms but I think its gonna be a bit of a pain to build as I think its gonna need a lot more arms than 4. Just thought I will post this up for peeps to be aware of this designs limitations...

I do agree, It looks very intresting and maybe Archer have hit on the magic spacing/distances/dia ect.   

And the masterpiece

Hi Archer,
   Would "your track" loop be scalable? . I'm sure I will have enough mags I can put this whole thing to bed in  2-3 hours if you give me the exact dia of your loop and dia of your track mags and also spacing/length of your track mags, weight/length of your rotor mag... will it loop or not that is the question. We can all have the answer if you want to give me this information I will post a vid on pooptube with all credit going to you within 3 hours of receiving the the correct information. there will no need for you to have more money to prove will loop or not. This is NOT a dig at you just thought it may help stop a lot of bickering. Then we can get on to more serious stuff.. Just a though. 

[gwhy!]

why make the nebies go through the pain of it all, thought i would save the trouble and keep my new polite self on track. welcome newbies, this is gwhy in the past. 4 months ago gwhy??? funny 3 weeks ago you didnt know anything about it.

And the masterpiece

And your point is ?....  you totally lost me . 3 weeks ago didnt know anything about what ?
BTW Yes I can prove I was using a array before you and I possibly can prove The up/over and out was done before you by me about 4 months ago. If I was to post this on this forum would this then shut you up about all your claims and get on with trying do what you said you CAN do a month or so back. Your still a Muppet. So still Nothing new.. 

[The Eskimo Quinn]

yes and all those posts by you not knowing what the outcome would be or how to scale it or the exact distances etc etc etc, if you already had done it, you would never ahve made those remaks, in fac t you would have gone straight to victory dance when i wqas still running on the floor before vertical, but no claims of it at that point simply, that you would like to see it run further on the floor.

what you are going to post a recent vdieo that you made, please everyone can read your posts and that you offered to do it with ferro mags not so long ago, or are all your posts lies, what are you going to use an old "backdate the video trick" oooh ahhh reset the clock on the computer to 4 months ago and all doc get that date. please, that why they dont take them in court as dates anymore, coz my kids know to do that for school work.

You have been busted as an oil person trying to mislead the public as to what they should be following, please leave quitely. others will no be so polite. your credibilty is gone.

Oh and spare us photos of the track section you use for your trigate mobile, i have seen the videos, bet if you put a set of my type of rollers under your belt to run the mayernik in reverse your little car would fly. But toddle off to trigate land where you and certain other liars belong.

[itanimuLLi]

@ Freddie,
Nice video, well done.
Put some streelballs at the ends of your BIGG magnet.
chears