Roll on the 20th June

[mental breakdown]

I sent this man an email from the contact on his website.  I asked a few basic questions and wished him the best of luck.  He personally responded to my questions and not with the flare of a salesman.  No exclamation marks throughout the response, no self promoting monologue or scripted canned responses.  I doubt he is looking for a million emails... who knows...   If this is a "scam" then the pitch is more like Tesla, Moray and other inventors and without a dollar value attached.  I do not believe this is a scam, I believe that the man who goes by the name "Archer" truly believes he can do it.  His understanding of what he is doing exceeds my basic understanding of the principles involved.  If it costs me nothing, I am going to support his efforts and be skeptical but not completely dismissive of his claims.  If there is one chance that this guy has a special talent such as many of the deceased inventors that are admired in these forums and on the internet then it is worth keeping an eye on this fellow.  Card table salesman, generator salesman, used car parts salesman..... Puleeesssse.  There have to be much better methods of gaining sales then making a free energy claim and everything he has included so far in his design has cheap or generic options.  If there is anyone in these forums that has some real understanding of any of the concepts he is speaking of I would suggest you ask him yourself.  He isn't in hiding or dead (yet).   

Just a thought...



   

[ramset]

Mental B   sorry you thought I was serious about generator salesmen [it was a joke]   I would'nt  be building his frame as I stated above if I didn't  have some confidence in his ability to come thru     Chet

[Sprocket]

He certainly is sticking his neck out - not afraid of offending bigoil or the Tesla disciples (he's not a big fan of Mr T. it would appear)...

I thought some of the 'heavy-weights' of Bessler would have been all over this by now.  I'm intregued by his use of three hollow tubes in order to somehow re-distribute overall wheel weight, as opposed to trying to move the weight from the 7 to 1 o clock position.  Unfortunately, I lack the brain power to perform the mental gymastics needed to figure out the next step!   It is interesting though that he is opting to go the quasi-PM route, using power from the generator to 'close the loop', instead of an all-gravity affair - which seems to be what 99% of all failed wheels have attempted...

On another note, someone posted a 'proven' (at least according to the pdf ) Gray magnetic motor pdf that was hosted on Rapidshare,  Has this thread fallen onto another 'black hole'?  The construction details are succinct and detailed imo - just wondering what opinion people that are skilled in building such motors have about this...

[dhirschfelder]

Guys,

I emailed Archer and asked if he would consider posting on this thread. He advised that his account no longer works but said I can post the following text below. Thanks Archer for taking time to reply

"for the note on the accelerator, two things, for the guy who said 
about the 9 liters from 10?? sorry first of all the equation is 
false, when you have a 10 liter bucket and you add ten liters per 
minute it overflows at ten liters per minute once full, if you have a 
20 liter bucket and add ten liters per minute it overflows at ten 
liters per minute once full, the addition of the loop does not alter 
the rate of airflow once the tube is full, and considering the airflow
 
rate is 60litres per second it is full instantly the wind speed 
measurement when running with the loop open or closed was the same. 
Mike Bell the engineer for whom I built the device is a pilot and 
carries a wind speed meter with him always, and if you knew the man, 
you would know his testing methods are exceptionally precise, in fact 
without insulting the man, he is so pedantic about perfection, that 
although his heating equipment is the only kind in the world with no 
competition, he keeps upgrading and changing the models so much, that 
no one model has lasted a year, which drives everyone in his factory 
insane. They spend so much time building new prototypes of existing 
products they can't get their own work done. (sorry mike but it's true)

Lower airflow?? ten liters per second is just that regardless of 
container size, and if it goes in at that speed it has to come out at 
that speed.

So too many things in physics by Newtonian bullshit are not true, EG: 
for every action there is an equal or opposite reaction, well you can 
print this very in your face proof it is not true in the science 
monthly magazine, for in front of mankind?s eyes everyday, especially 
science one very basic instrument proves this wrong. A magnet, a 
magnet can lift more than it can push, the attraction and hold 
properties are greater than the repelling properties. EG: a magnet 
capable of pulling a 200KG magnetic block cannot even strapped to a 
front end loader moving slowly up to the same block push the 200kg 
block along the same surface with that repulsion effect, the hold 
effect of a magnet is far greater than the repelling effect. Poor old 
Isaac, sorry champ but wrong again, for every reaction there is not an
 
equal or opposite reaction, that in itself should show you that you 
can get movement without power and that magnetic friction is not 
equal, thus in the same vein that fall usually equates to lift and why
 
an evenly balanced wheel will not turn, or an unevenly balanced wheel 
can fall but not rise, this does not apply to magnets where the lift 
verses repulsion, the lift will always have more (spare) power of the 
repulsion, that in itself is natural over unity!!

AS for the smaller version, yes you can build the machine scaled down,
 
but we need to convince the world this is the answer not some dinky 
toy that does a trick, it must run a standard household item so that 
all will be convinced and all will move to make the change and general
 
engineering will get into the act without thinking they need a 
research team to do it, and I can assure you up-scaling is not as easy
 
as it seems, some parts for the small one I was able to buy in toy 
scale, but have to be made in the larger scale, this will become 
evident when we reach building the control arc.

Hang in there, you have waited this long to see an answer 8 weeks is 
nothing, don?t expect too many to start building until it is complete 
and working, but you also have my word that I will download it to this
 
site even before the website."

[ramset]

THANKYOU  very  Very cool  a brave and true hero ..... regardless   Chet