Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Canceling Lenz's Law - Methods

Started by supermuble, November 19, 2008, 03:48:27 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 36 37 38 39 40 ... 45
User actions

Zorro

#185
April 05, 2010, 10:51:52 AM
Free Energy Generator- The real deal!

its really interesting... just began replicate it.

wojwrobel

#186
April 24, 2010, 04:17:34 PM
hello

i have been thinknig why not to switch magnet pole when we about to leave the coil ?

will it cancell lenz force? i think it would and even push away from the coil right?

what you guy think?

cheers from poland
wojsciech

Bruce_TPU

#187
April 24, 2010, 07:59:48 PM
Quote from: DreamThinkBuild on March 18, 2010, 10:55:17 AM
@Tyson,

Thanks for the link, haven't seen that one yet. The idea makes sense though. In a normal generator the coil and magnet are fixed. As they get near since neither one of them want to budge the EMF/Lenz sets up a resistance which induces drag. Now if the magnet is just able to be spun/rolled (wrong term, more like pulled by Lenz pushed by EMF) away it will greatly reduce the drag.

It looks like from the video that the more load it speeds up, could be that the magnet is forced/rolled away at a greater velocity. Would have to build to see real measurements of what is going on.

http://www.youtube.com/user/Th3Generat0r#p/u/2/_9ktD7kAI7Y

That video and the other two...absolutely BRILLIANT thinking!  That is what I have been talking about...  Figuring out ways to USE Lenz to our advantage, and this fellow may have figured out a way...

This may indeed be the long sought after solution... elegant in it's simplicity!

http://www.youtube.com/watch?v=etFCzIe-D2Y

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

BEP

#188
April 24, 2010, 10:14:19 PM
When you short the output leads of any generator the first thing that happens is the stator field starts to collapse.

When that field collapses the voltage falls almost completely to zero. How many Watts are you putting out if the volts are zero and the amps are [anything you want]?

Of course the rotor increases in speed. This is because the generator is shorted and is no longer a generator. It is a flywheel.

This is a very common mistake made by folks of every technical level.

A short circuit is not a load when the generator is so weak the voltage collapses to zero. If they wish to load it they should load it with a light or resistor. Then it will slow down, if the field isn't caused to collapse completely.

I've performed short circuit tests on 2 megawatt diesel driven alternators and generators. It is a rather strange thing to see the engine speed surge near a dangerous sounding level when you close that 6000 amp 3 pole switch, shorting the generator.

I do love the man's style and getting the kids involved in such fun.

sparks

#189
April 24, 2010, 10:22:27 PM
    I have no idea if this is doable but if the current in your output coil is delayed then the magnetic field it produces still follows lenz law it is just ill timed.  I know in an electric motor that insertion of a capacitor in series with a winding causes the magnetic field of that winding to manifest sooner than the magnetic field produced by what is called the main winding.  This causes a split phase motor to operate.  The magnetic field then shifts from auxillary winding to main winding.  The main winding consists of usually twice as many turns of larger diameter wire than the auxillary winding.  I have seen cases where it takes as much as a second for current to flow in a coil after being fed voltage and continue to flow after being disconnected from the line.
Think Legacy
A spark gap is cold cold cold
Space is a hot hot liquid
Spread the Love
Print
Go Up Pages 1 ... 36 37 38 39 40 ... 45
User actions