DIY Energy amplification experiment

[Magnethos]

So, when we use some special kind of energy (cold energy? pure voltage?)
the properties of the circuit components, are the opposite. A battery acts like a diode, a positive resistor turns into a negative resistor, etc... So, in theory, a negative resistor gets energy from the vacuum.

After the relaxation time, current saturates the circuit and then, each component of the circuit acts in the common way.... A battery is a battery, a positive resistor is a positive resistor... read the last post to know about the relaxation time constant in a conductor.

[jadaro2600]

This is all too familiar you know; like the Joseph Newman machine.

His device essentially avoids that special allow and creates a coil with such high ohmic resistance and impedance that the saturation time is high.

What original experiment was he trying to replicate? ..is there a link to that?

[Magnethos]

This is all too familiar you know; like the Joseph Newman machine.

His device essentially avoids that special allow and creates a coil with such high ohmic resistance and impedance that the saturation time is high.

What original experiment was he trying to replicate? ..is there a link to that?

Thanks man! I better know what he is doing. I was thinking in something similar. If he increases the saturation time, then he increases the relaxation time constant. So, current maybe needs 1 ms to saturate the circuit instead of 0.00000000000000000015 secs. But there must be a formula to calculate the exact relaxation time when we use a high ohmic resistance and impendance circuit.

So, he is splitting the positive to increase the relaxation time while using copper wire as conductor.

The original experiment I'm talking about is this:
http://jnaudin.free.fr/html/tbfrenrg.htm
In this original experiment is explained that we need a special alloy wire (Al 98%, Fe 2%) where the relaxation time is 1 msec. We need to remember that each material has a different relaxation time. In that alloy, the relaxation time is 1 msec, so, we can draw only pure voltage in that 1 msec, from the battery without affecting the current. The experiment explains that we can charge a capacitor with pure voltage and 0 current if we connect the dipole to the collector (capacitor) in 1 msec. After that 1 msec, we're drawing current from the battery and we're destroying (discharging) the battery.
The key is to use the special alloy wire, connect 1 msec and charge the cap, and then repeat the process again and again. We're only drawing voltage, so we will have an unlimited battery.

In the experiment of youtube, the theory is the same, but we know is very hard to get the special alloy wire. So, the guy 'invents' a new way to increase the relaxation time constant while using copper wire. The experiment is the same as the original al-fe wire. But the guy change the schematic because he needs to increase the relaxation time. So, he is doing the same as the original experiment, but using copper wire and a special configuration (high ohmic - high impendance) to replicate the same experiment.

[jadaro2600]

In this original experiment is explained that we need a special alloy wire (Al 98%, Fe 2%) where the relaxation time is 1 msec. We need to remember that each material has a different relaxation time. In that alloy, the relaxation time is 1 msec, so, we can draw only pure voltage in that 1 msec, from the battery without affecting the current. The experiment explains that we can charge a capacitor with pure voltage and 0 current if we connect the dipole to the collector (capacitor) in 1 msec. After that 1 msec, we're drawing current from the battery and we're destroying (discharging) the battery.
The key is to use the special alloy wire, connect 1 msec and charge the cap, and then repeat the process again and again. We're only drawing voltage, so we will have an unlimited battery.

I suppose that the end result if being able to pulse charge a battery or run a pulse motor to recharge a battery.  The real question is; will charging a capacitor in this was produce usable current, or will it have to be a voltage based motor? ( as is Joseph Newman's )

[Magnethos]

Yes, the end result is pulse a charge before current saturates the circuit. Drawing only pure voltage, we are able to charge a cap, then the cap is discharged and we have current + voltage. We can repeat this process to get all energy we need, without affecting the battery, because we aren't drawing current from the battery.

In theory, when we draw common voltage from a source, current appears. So, I think the theory says that current is an effect of the voltage or something similar. So, the theory is that we can use that power from the cap to run any device.