Stanley Meyer Explained

[NdaClouDzzz]

Each car owner is allowed to modificate his internal combustion engine to hydrogen/fuel-mix combustion !

lanca, thank you for your posts, but we are not talking about modifying a car to run on a mixture of hydrogen and fuel (petroleum).
This is about completely destroying the gravy train of the powers-that-be. While I'm all for such a change, I don't think it would bode well for those undertaking the task, nor for the people of the world.
Here's an example of the power wielded by the powers-that-be.
I quit smoking cigarettes quite a few years ago, and I did so by vaping. From my understanding, many people did the same thing. So what happened as a result of vaping? Big tobacco lost many customers/money. So what does big tobacco do? MY OPINION is that they pooled their wealth and paid off the politicians to make it illegal to do mail-order vape products. Now, for all intents and purposes, vaping products are illegal. I say for all intents and purposes because although vaping products are not technically illegal because they can be bought at a store in person, the effect for most of us is that it is illegal because we can no longer purchase online, which is what most of us do/did.
Now that is what the powers-that-be can/will do when it comes to their gravy train. Now just imagine what they can/will do when it comes to energy! That is not defeatism, it's REALISM!
Am I saying DON'T challenge the powers-that-be? Absolutely NOT! By all means, tyranny must be confronted and defeated! But if one is to be successful they must be fully informed of the feat before them!

[lancaIV]

Really ?Shall I be surprised ?

Oh,beside me,on my desk the Cobra,filled with eSucco 10 ml Nico and 30W stage (200 W power max)!
Oh yeah,(hydro-electro) vaporizing in action ! ( My daily medicine !)


We are speaking about commerce,about the judging system,the politics,the finance  syndicates !
About (common un-) known rights/obligations !
Permissions,fees/licence, for the one : costs/payments - for the other : gains !

Over all skin colours and ages !


Consultance study : behind 1 real commercial success are more than 300 thinking fails/trials in average ratio  !

[h20power]

Now that that is over shall we get back to the topic of my thread?!
Meyer's role in all of this seems to have been to legalize this technology so that when people like me come along after his death we aren't prevented from doing something with this technology. It's kinda like the man knew he was going to die and planned ahead for that in his own way.


My following the scientific method has lead me to asking a lot of questions and then I went and answered those questions which lead me to even more questions that I had to answer. All in all I have paid my dues with this technology and I can honestly tell you it isn't easy to get this technology to work correctly. I've pointed out the need for special tools like a differential probe and wire that is designed to be use with high voltage to the need to vacuum resin seal these transformers. I've done all of this in good faith as I didn't want to be the only one that understands how to put a high voltage potential on the plates under a water bath. I've shown my work, had interviews where I talked about this technology and what I had figured out about this technology as I learned it's secrets.


But one thing I will not talk about is my plans on just what I will be doing with this technology as those plans are for me and me alone to know.


This technology has the power to do what other technologies could only dream about doing as it can replace the use of fossil fuels in practically all of it's many uses as it pertains to energy. My understanding of this technology will allow me to go in many directions Meyer was never allowed to go in due to his untimely death back in March of 1998. Interestingly Dr. Dingle was my primary inspiration as he told me I was heading in the right direction and to just keep at it and never give up. I followed his advice and now I'm ready to move forwards with my plans.


As I have now shown very clearly this technology is under no patent protection and thus free for all whom wish to make use of it in any way they see fit to do so. In my many years of working on this technology I have made a lot of enemies for reasons only they seem to understand as I have done nothing to them and have only talked about what I had figured out about this technology as I learned it. If my showing high voltage being applied to my WFC upsets you then you are the one that is upset and it has nothing to do with me and you will thus need to be the one that figures out why you are upset. Just know that what ever it is you are feeling truly has nothing to do with me as I am just showing my work for the most part and not much else.


If you haven't figured out by now when you are working with this technology you really can't go cheap as things must be done correctly or simply put it will not work for you. I had to stop what I was doing many times so that I could save up to get something I needed like those differential probes as they do have a bit of a cost to them. And after I got the things I needed I continued on with my studies with the needed tools so that I could move forwards and learn more. Each time I tried to go around getting the things I needed it ended up costing me more money than if I had just got the things that I needed in the first place.


I am truly thankful of all the many lessons my professors taught me in my college days and even took the time to share some of that wisdom with all of you. Now I will leave you for a bit as I really need to focus on raising the capital I need to more this technology forwards.


Take care everyone,
Edward Mitchell
CEO and Owner
True Green Solutions

[kolbacict]

My understanding of this technology will allow me to go in many directions Meyer was never allowed to go in due to his untimely death back in March of 1998.

I have long been tormented by doubts, is this so?  Have any of you seen him dead?
At least I haven't seen it.
p.s.
https://overunity.com/7030/stanley-meyer-explained/dlattach/attach/181238/
What's the beautiful ! respect.
And I have pitiful crafts.
But there were my own original designs, which I myself came up with.
For example, with three and four electrodes. According to my thoughts, to create a three-dimensional field in the water.

[h20power]

From how I see things one must first mimic everything they see the one they are following is doing, in this case Stanley Meyer, before they can make changes to it. If not how are you to be able to tell if there are changes that need to be made if you don't first see how it works from how it was used by that inventor? This is why I am able to alter Meyer's technology in a way that makes it better as I built it his way first and studied it thoroughly to see what was going on with my own two eyes. After looking at the technology in action I was able to take the technology further in many cases than Meyer did due to the fact I was given more time with the technology than Meyer was given. But note I didn't start right off the batt trying to make changes to a technology I had no idea of how it worked fully.


In this Don Gable provided a lot of useful information but I question everything and everyone as that's just the way the scientific method works. I used what Don Gable had shown in his drawings to build my own WFC's. I looked at things in a totally different way than most people around me to include Don Gable as when I first saw that photo showing how Meyer's WFC was wired I quickly understood what it was I was seeing and why Meyer had it wired up that way. With a little more time I also understood why Meyer had to disconnect one of the eleven resonant cavities from the series array. I went ahead and drew up another drawing using my AutoCAD skills so that people would have something better to share and go off of than those hand drawings Don Gable provided. As I worked with the technology having built everything practically the same way Meyer had done I began to see what worked and what did not work. I would often share my findings with the group but not all the time. But my main point is before I could make any changes to the technology I had to first build it as close as I could to how it was built when Meyer was testing the technology and learned from hands on experimenting how the technology worked first.


People often get offended by me when I say I know more than Stanley Meyer knew as it just sounds like I am being boastful but in reality I was just given more time to work with the technology than Meyer was given due to his untimely death. In time I made changes to the transformer's, the WFC's, the Gas Processor, and even the circuit's with a lot of help from others on the ladder as circuits aren't my bag of tea. I even recognized things no one else has recognized like the "Air Reclaimer," that is something that Meyer built to cut down the NOx emissions. It looks like  the Gas Processor but no one has ever seen it before as it wasn't something the people who were looking at the technology were interested in. Meyer used that device like a catalytic converter to break the bonds of any NOx gases that may have formed during the combustion cycle prior to those gases being put in the atmosphere. I think I am the only one to actually build Meyer's figure 10-4 transformers and test them to see what differences that transformer had compared to the others.


Basically I left no stone unturned in my quest to understand the science behind this technology and as a result of that I understand things about this technology that no one else does right now. But remember I started off building what I saw Meyer using first as a base for my studies and I built everything to the best of my abilities to do so.