Stanley Meyer Explained

[h20power]

https://overunity.com/7030/stanley-meyer-explained/  2009


Nowhere something written about the technology performance ! The costs ! The minimum maintenance skills from the later owner !


compared :


2021 " water fuel cell "  offer by many promotors ,here car installation specific:


https://www.google.com/search?q=water+fuel+cell+car+conversion+kit&rlz=1C1AVFC_enPT930PT930&oq=water+fuel+cell&aqs=chrome.3.69i59j0i19l5j0i19i22i30l4.9905j0j7&sourceid=chrome&ie=UTF-8

From reading this I can tell you have not read through this entire thread as I do go over some of the cost of these things and show my work as I progress with this technology in real time. But you should know that I require people to do their own work and research as stated in the opening page of this thread. The problem is we all have our ego's we need to deal with and one way I found to deal with mines was by focusing on making sure I was following the scientific method. I'm not perfect as sometimes I have lashed out at people for being stupid as it annoys me, but for the most part I'd share stuff I figured out as I was learning it. I'd go over the math showing where the energy was coming from to out do fossil fuels and more.
However somewhere down the line I slowly stopped sharing everything as too many where just picking a fight with me for no real reason and most of them had no experiments under their belt concerning this technology. Slowly the flame of my free sharing spirit was put out as I passed through the school of hard knocks. In time I simply gave up on others being able to see just how this technology actually works as I was the only one that was making progress while everyone else were just trying to pick fights with me for doing so.
I saw with my own two eyes that each time I'd make a post showing me making more progress on getting the voltages to the WFC up that act of sharing would be met with pure negativity from a lot of members of this forum. It got so bad that I simply stopped coming to this forum for a long period of time and tried my luck with other forums. That too didn't work out all that well as people seem to just get madder and madder at me each time I showed success towards reaching the ionization threshold for the atoms that make up the water molecules. I think I got banned by practically every forum that dealt with this technology with the exception of this forum. And over time each one of those forums that banned me simply withered away with their efforts towards solving this technology. The sad part is I knew the reason why as those that banned me had in their solutions to this technology lies baked right into them and those lies lead the way to their demise with their work on trying to solve this technology. You don't have to take my word for it just take a look around at these other forums and you will see that the work on this water for fuel technology is practically dead in these forums that deal with this technology.
All those with baked in lies into their solutions faded away along with those that didn't follow the scientific method and went about trying to solve this technology aimlessly. To do things correctly will have a big cost along with it but that's the price that must be paid if one is to get this technology up and running the correct way. All too often people go cheap and then fail as going cheap added in places where the technology would not work correctly as things weren't being done correctly. Just put yourself in my shoes for just a moment. It's going on 8 years since I showed high voltage being put on the plates of a WFC and to this date not a soul has duplicated my efforts back then. It seems I now stand alone, but I reached out to a few people and let them know how the technology worked so I wouldn't be the only one that knew. Most people simply can't afford to build the technology correctly as it requires very expensive machines or one to run off trying to make deals with machinist, and other companies for raw materials and tools so that things can be built correctly.


You see Electrolysis is simple and this technology is the opposite of Electrolysis as it's very complex and expensive. Thus now I really just focus on trying to raise the capital I need to start my plans with this technology as the way I see it, "I must be the change I wish to see in this world."


Now I went over the thread and see most of the teaching videos and other links I shared no longer work so I guess you would have haven to been there in order to get the shared information. Here is one of those teaching videos I found that is very much relevant to how this technology works. I use to share many such videos as I was learning how this technology do what Meyer said it did.  [size=78%]https://www.youtube.com/watch?v=algECMeQFrE&ab_channel=MITOpenCourseWare[/size]


Best wishes,
Edward

[kolbacict]

Even I conducted such an experiment, hoping to see at least some natural oscillations on the water condenser.  At least three to four free oscillations after the discharge of the high-voltage capacitor.
During intense gas evolution from passing direct current, and without it.
The so-called shock excitation of the oscillatory circuit, you know that.
And they were! But, as it turned out later, these were parasitic resonant processes
in inductors. Which you see in the picture ...

[lancaIV]

Mr. Mitchell, a good morning !
I hope You do not refer 09.04.2009 numbers,#112 !
We have now April 2021 !
Economical improvements since 2009 ? 3000 to 2000 to 1000 US$ kit ?

Btw :

#177 "saltwater burns"- myth John Kanzius technology ,also no success since " world energy market change"-proclamation 2011


and for 3000 bucks You got 2008/2009 in Ohio and Michigan  a 2000 sqft home with garden ! Junk bonds $/cash $  market price level !


Sincerely
OCWL

p.s.:  #516
       
        I have been never there,but my father - in the 80',before they built there this monument : Dakar,Senegal 
        negotiations : http://www.joshansen.com/ , in partnership
                             with SCOA  https://fr.wikipedia.org/wiki/Soci%C3%A9t%C3%A9_commerciale_de_l%27Ouest_africain


        This fine art sculpture donated by the real-democratic and "so damned social" estate : North Corea


        Lagos/Portugal to/from Lagos/Nigeria :   https://en.wikipedia.org/wiki/Mercado_de_Escravos


         first slave market in Europe of the modern era took place, in 1444

          Antão Gonçalves, discovered that Africa already had an internal slave trade and bought slaves on his own
          initiative, returning to Portugal with 14 Africans.

         But : before the Portuguese the african slavery market was in the "ownership" : by arabians   


         and "Blacks hunted Blacks" by collaboration

        Especially after the genozid of the caribian indigenes the beginning


        https://translate.google.com/translate?sl=auto&tl=en&u=https://de.wikipedia.org/wiki/Atlantischer_Sklavenhandel
        ( slave trade was abolished,but not slavery or economical trade behaviour : bondage ! Today common and existent )



        Reality bites !


        Going the real historical roots back :   Movie as Life,Life as Movie              https://www.youtube.com/watch?v=FMPFQo5V-lA

[kolbacict]

Have you seen the film by Lars von Trier "Manderlay" ?
How did the heroine want to free the slaves, and what came of it?

p.s.

"saltwater burns"- myth John Kanzius technology

So it is possible not to work in this direction? Because I'm making a powerful generator now at 31 MHz.

[h20power]

Hi you two,


No, I don't think I watched that movie before.


Getting back to this technology I want you two to take a close look at these photos as you will see Meyer merely mimicked the earths global electric circuit thus that voltage intensifier circuit is something special. The blocking diode has but one role in this circuit and that is to act as a switch which is either on or it's off. This part of Meyer's technology must be copied and studied as it's the heart of the technology. You must understand this circuit's functionality fully before you can go about making changes to the circuit as I have.


I started from the bottom when I went to try and figure out how it all worked and I didn't get it so I went back even further when I made the 8xa circuit so that I could study that. As I learned how the 8xa circuit worked I was able to move back to the voltage intensifier circuit with some limited understanding of what Meyer was trying to do. I learned that the secondary side was an isolated circuit and learned of the importance that it remain that way for if a ground is introduced to the system the circuit will take it and never build up a high voltage potential.


You see in my research my aim was to understand this technology not duplicated it as this way I can go beyond just making use of this technology for vehicles. I followed where the science lead me and it took me far away from Meyer's work. I was looking at photosynthesis but asking totally different questions, looking into how thunderstorms worked and figured out a lot of things that simply can't be found in the text books of today. In the end I came up with a whole new theory to be added to the books of science but there was still more to be learned. I still remember all the people that told me that I was wasting my time when I stopped working on the WFC and moved over to try and understand the Gas Processor. That decision to study the Gas Processor marked a turning point in my understanding of this technology as unlike the WFC that device wasn't so hard to figure out and it was related to how the WFC worked. The cost of building that Gas Processor was around $1,100 bucks with a minimum make of three so I teamed up with two people in order to be able to afford that device. It's of my own design as I know how to use AutoCAD and have been putting this skill-set to use for this technology.


To understand a thing is to master that thing which was what I set out to do right from the off.


Take care,
Edward