Howard Johnson Replication Tube Claim

[carbonc_cc]

Here are my other 3 videos that uploaded last night.

Handheld Stator magnet layout preliminary testing:
http://www.youtube.com/watch?v=pJKMF_U4CYw&feature=channel_page

Compass Readings:
Stator
http://www.youtube.com/watch?v=PRfhMk6730Y&feature=channel
Rotor
http://www.youtube.com/watch?v=iHyIRLORqIU&feature=channel

[nyctuber]

@ nyctuber,

There is no way that Mylow can satisfy his critics with a video. If that were the case Godzilla would be accepted as real. It is just too easy to put something convincingly on film.

The only way for him to come out of this a hero is to have a few people duplicate his results or have some experts test his motor. Even the latter has pitfalls since Howard managed to convince the USPTO with a demonstration.

Once some people replicate his motor his critics will fall silent, but that might be easier said than done.

Personally I wish him luck. I hope he succeeds.

Hans von Lieven

Makes sense to me

[nyctuber]

Here are my other 3 videos that uploaded last night.

Handheld Stator magnet layout preliminary testing:
http://www.youtube.com/watch?v=pJKMF_U4CYw&feature=channel_page

Compass Readings:
Stator
http://www.youtube.com/watch?v=PRfhMk6730Y&feature=channel
Rotor
http://www.youtube.com/watch?v=iHyIRLORqIU&feature=channel

So, it looks like North pole isn't particularly important, and the same effect is happening with side-pole magnets rather than force concentrated in the corner of the stator

Thanks for posting the vids

[sterlinga]

I'll ask Mylow to ask the re-magnetizer guys how much the usual rate is, and offer to pay that usual rate, and see if they'll agree.  I'm confident that the people on the forums would help come up with the cost if it is quite expensive.

At least then we would have a magnet that we know works, and the attempt to find a substitute magnet wouldn't be so Edison-ish, given the short time we have before Thursday.

In the long run, though, that method is not sustainable, because the amount of energy/cost required, and the difficulty of finding re-magnetizers, would make this open source too expensive and difficult for most people to want to play.  We need to find materials/sources that are affordable.

Also, even if Mylow offers to pay the going rate for using that machine, I'm guessing that they will decline because Mylow's magnet is so much smaller than what they usually put in their machine, and the boss guy expressed discomfort at the uncertainty about what this might be doing to his machine.  e.g. You don't want to run a microwave oven when its essentially empty.  Maybe the machine manufacturer would know the ramifications/safety/danger for the machine in this configuration, and could make a suggestion as to whether this would be a problem or not.

Sterling


----- Original Message -----
From: acg_1001
To: mylow_magmo@yahoogroups.com
Sent: Monday, March 30, 2009 10:44 PM
Subject: [mylow_magmo] Re: Send Mylow Stator Magnets to Test -Yes and remagnetize the old ones



I agree with this. You have the device that runs!

>
>
> Why don't you have the magnet remagnetized like he used to, and then
run
> the set up as it was working.
>
> Ok they will not do for free any more. How much is it to do it? Surely
> Allan, you can help him out and it's a small price to pay as compared
> to the presenting it to th Ivy Leaguers? Lest not forget you will be
> getting as you already noted, 1/3 of the revenue from this device.
>
> I asked this so many time and no reply. Others agreed, it's the
> simplest and most straight forward way towards a running device.
>
> Not sure why the hesitation there? What's the hold up?
>
> Thanks again for all your efforts yours and Mylow's
>
> Mike
>
>
> --- In mylow_magmo@yahoogroups.com, "Sterling D. Allan" sterlingda@
> wrote:
> >
> > I spoke with Mylow this morning,
[...]
> > He's very anxious to find a good stator magnet.
> >
> > I suggested that if people want to send him magnets to try in the
> stator position, of different sizes, strength, that they could send
them
> to me, and I can forward them on to him.
[...]
> >
> > Sterling

[AnandAadhar]

So if I get it right: the stator horse shoe magnet tells the little fake horse shoes to become real, inside polarized ones and the little ones kick back saying, "No we won't be real ones, we stay inside/outside polar 'horse shoes'." Sounds childish but that diamagnetic/magnetic conflct between a stronger and a weaker magnet can apparently make the space energy rush in to restore the original polarization of the rotor magnets. That seems to do the kicking forward here. This is apparently the way to apply the 90 degrees rule. I always doubted that this is possible without further feedback or gravity (second force) involvement, and I have to test this option with a likewise set-up (and you all too). Presently I am engaged with the IPMM 7, but if that turns into frustration, I'll take a look at this option.

If this thing is true, the relativity principle is broken and Einstein is down the drain who based his later theory of general relativity on it.  For the First time since Finsrud's artwork we see maybe  a genuine replicable example of really a simple way of breaking with the equivalence principle that says that inertial mass and gravitational mass are the same (and thus cancel into stall always with standard friction). The magnetic interaction breaks the equivalence and adds energy (=mass) to the inertial power of the rotor. Astonishing if this is true. Witness the matertialisation process of universal energy, of ether energy! A revolution if we can copy this.... This stonehenge thing is on my tinker-agenda now. Space (energy), the final frontier. Lol!  Any successful replications of Mylow's stonehenge-MM yet? For that is the point, talking further won't help, action is the way now.

-my vids: http://www.youtube.com/user/anandaadhar
-my research pages: http://theorderoftime.com/science/free_energy/index.html
-my OU forumpages IPMM: http://www.overunity.com/index.php/topic,4449.new.html#new