Howard Johnson Replication Tube Claim

[sterlinga]

Sorry, I've gotten a little behind in reporting on my recent correspondence with Mylow.

There are some very great developments afoot.

Today he opened his box of magnets that I had shipped to him -- two complete rotor-stator sets; one of alnico, and one of ceramic.

He said the alnico channel magnets for the rotor are "exactly like what he had before -- same size and shape"

He was very excited to get them on the rotor disc and get them running.

What's even better is that the supplier, AllMagnetics.com (ask for Felix, mention promotion code "PES") has 700 of these in stock, with 1000 more on their way in a month.  (Part number listed in the email  below.)

And Mylow is now willing to let some of our guys in to witness.  This is all likely to happen today/tomorrow.

Eddie Sines (http://www.potomacenergyprojects.com), PMMTester and LightRider are on notice to jump in cars / on planes to come in.  I'm in the SLC airport set to fly out in 45 minutes to Estonia, so I'll not be able to go this time; but I have confidence in the three that are planning on going.  LightRidder will be travelling 1400 miles from Canada to attend.

A quick note: Eddie, who will be the public face on the camera (the other two guys wish to preserve their anonymity), will need some help reimburse his plane ticket, if some of you who have offered could come through for him.  He's willing to cover $200 of his ~$600 round trip cost.  PES is bled dry right now, but I expect that with validation that the sales of plans will go up substantially, enabling us to reimburse his travel.  http://mylowplans.com

In other news, Mylow told me that he had his new configuration running as well (I didn't get a chance to ask him exactly what he meant by that).  But he said it had a lot of up and down vibrations. 

A couple of days ago he told me that he did a run-down test with this bar magnet configuration, and that without any magnets on the stator, the run-down time was around a minute, but with the magnets on, it was more than five minutes.

I saw a similar effect when I was playing with his version 1.2 configuration.  With the stator magnet moved far away, the run-down time was around 53 seconds from 50 rpm to zero.  But with a certain configuration, the run-down time was around 75 seconds.

In the last few days, Mylow seems in very good spirits, glad to be doing what he's doing and confident that good things are unfolding.

He's a hero, in my opinion.

I'm very much looking forward to these unfoldings.

While I'll have limited phone availability in the next few days, I will have internet, and can check my phone messages.  PMMTester and others know my Skype username.  I prefer to not give it out publicly.

Onward, and upward.

History in the making.

Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA




----- Original Message -----
From: "Sterling D. Allan" <sterlingda@pureenergysystems.com>
To: "felix" <felix@allmagnetics.com>
Sent: Monday, April 13, 2009 1:34 PM
Subject: Re: Your Order


Hi Felix,

I'd like to modify this, if it's not too late.

I want the following sent VIA UPS NEXT DAY to:
[Mylow]

64 pcs. GALNCH use P/N HS253875 .
2 pcs. HS811N @ $10.00/pc. (not in stock, ship 07270 ...)
1 Magnetizer for Alnico Horseshoes (no charge "lend it")
2 pcs.  CB60134 @....
64 pcs. CB-1434 @ ...
[...]

Thanks

| Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA

[chrisC]

Sorry, I've gotten a little behind in reporting on my recent correspondence with Mylow.

There are some very great developments afoot.
....

Onward, and upward.

History in the making.

Great job Sterlinga! Let's hope this set of videos with witnesses will put an end to the many questions and failed replication attempts. Looking forward to the results.

cheers
chrisC

[plengo]

Sorry, I've gotten a little behind in reporting on my recent correspondence with Mylow.

There are some very great developments afoot.

Today he opened his box of magnets that I had shipped to him -- two complete rotor-stator sets; one of alnico, and one of ceramic.

He said the alnico channel magnets for the rotor are "exactly like what he had before -- same size and shape"

He was very excited to get them on the rotor disc and get them running.

What's even better is that the supplier, AllMagnetics.com (ask for Felix, mention promotion code "PES") has 700 of these in stock, with 1000 more on their way in a month.  (Part number listed in the email  below.)

And Mylow is now willing to let some of our guys in to witness.  This is all likely to happen today/tomorrow.

Eddie Sines (http://www.potomacenergyprojects.com), PMMTester and LightRider are on notice to jump in cars / on planes to come in.  I'm in the SLC airport set to fly out in 45 minutes to Estonia, so I'll not be able to go this time; but I have confidence in the three that are planning on going.  LightRidder will be travelling 1400 miles from Canada to attend.

A quick note: Eddie, who will be the public face on the camera (the other two guys wish to preserve their anonymity), will need some help reimburse his plane ticket, if some of you who have offered could come through for him.  He's willing to cover $200 of his ~$600 round trip cost.  PES is bled dry right now, but I expect that with validation that the sales of plans will go up substantially, enabling us to reimburse his travel.  http://mylowplans.com

In other news, Mylow told me that he had his new configuration running as well (I didn't get a chance to ask him exactly what he meant by that).  But he said it had a lot of up and down vibrations. 

A couple of days ago he told me that he did a run-down test with this bar magnet configuration, and that without any magnets on the stator, the run-down time was around a minute, but with the magnets on, it was more than five minutes.

I saw a similar effect when I was playing with his version 1.2 configuration.  With the stator magnet moved far away, the run-down time was around 53 seconds from 50 rpm to zero.  But with a certain configuration, the run-down time was around 75 seconds.

In the last few days, Mylow seems in very good spirits, glad to be doing what he's doing and confident that good things are unfolding.

He's a hero, in my opinion.

I'm very much looking forward to these unfoldings.

While I'll have limited phone availability in the next few days, I will have internet, and can check my phone messages.  PMMTester and others know my Skype username.  I prefer to not give it out publicly.

Onward, and upward.

History in the making.

Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA




----- Original Message -----
From: "Sterling D. Allan" <sterlingda@pureenergysystems.com>
To: "felix" <felix@allmagnetics.com>
Sent: Monday, April 13, 2009 1:34 PM
Subject: Re: Your Order


Hi Felix,

I'd like to modify this, if it's not too late.

I want the following sent VIA UPS NEXT DAY to:
[Mylow]

64 pcs. GALNCH use P/N HS253875 .
2 pcs. HS811N @ $10.00/pc. (not in stock, ship 07270 ...)
1 Magnetizer for Alnico Horseshoes (no charge "lend it")
2 pcs.  CB60134 @....
64 pcs. CB-1434 @ ...
[...]

Thanks

| Sterling D. Allan, CEO
| New Energy Congress: http://newenergycongress.org
| (Pure Energy Systems) PES Network, Inc.: http://peswiki.com
| http://energystork.com - newfangled products
|
| Profile: http://sterlingdallan.com
| Daily news by email:
| http://www.freeenergynews.com/newsletters
|
| Phone: +1-801-407-1292 (mountain time)
| Fax: +1-801-880-8322
| Eagle Mountain, Utah, USA

I already offered some financial help on the yahoo forum AND I AM VERY SKEPTICAL.

I want more than anyone to get someone there and witness this thing quickly.

Fausto.

[chrisC]

I already offered some financial help on the yahoo forum AND I AM VERY SKEPTICAL.

I want more than anyone to get someone there and witness this thing quickly.

Fausto.

Fausto:

Are you skeptical he (Mylow) won't accept the $ and therefore the witness or skeptical if the wheel will turn on it's own? Can you please clarify?

cheers
chrisC

[plengo]

Fausto:

Are you skeptical he (Mylow) won't accept the $ and therefore the witness or skeptical if the wheel will turn on it's own? Can you please clarify?

cheers
chrisC

sorry about that.

I mean that I AM skeptical of Mylow's claims as I stated many times in the past but at the same time I am willing to give some financial help in paying for someone's air plane ticket to go there and witness this machine once for all and eliminate any possibility of reasonable doubt that has been permeating this whole saga for so long.

So, although I am skeptical on this one case I am willing to be open minded and help to either go towards a real progress or kill this story once for all.

In short words, I am putting my money where my mouth is.

Fausto.