Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Thane Heins BI-TOROID TRANSFORMER

Started by shimondoodkin, July 24, 2009, 11:33:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 3 4 5 6 7 ... 74
User actions

wojwrobel

#20
June 06, 2010, 07:27:57 AM
hello

i did a little investigation and came to idea that Heins is using two different coils one on top of the other !!

first coil "shifting coil" has very thin wire and many turns and its shorted and due its its own resistance it creates its own "voltage field" some kind of static charge that affects second coil that is "producing coil" so its behaves like capacitor that stores energy for a while and when magnetic field is leaving the coil the "shifting coil" loses its strength and allows producing coil to discharge the current so it not effecting the magnetic field that is gone ...

and that's how i think he shift current out of phase .....

cheers from poland
wojsciech

ps. this is the patent that have explanation to all what happens in the pickup coil,, CA2437745A1

Bruce_TPU

#21
June 06, 2010, 07:53:57 AM
No, I think it is much simpler than that!

Please watch this video and he shows and tells EXACTLY how he does it.  The idea is very simple!  This shows a COP >300%

Video:http://www.youtube.com/watch?v=RbRPCt1-WwQ&feature=related[/glow]

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

teslaalset

#22
June 06, 2010, 08:57:01 AM
Quote from: Bruce_TPU on June 06, 2010, 07:53:57 AM
No, I think it is much simpler than that!

Please watch this video and he shows and tells EXACTLY how he does it.  The idea is very simple!  This shows a COP >300%

Video:http://www.youtube.com/watch?v=RbRPCt1-WwQ&feature=related[/glow]

Cheers,

Bruce

Indeed a good demo.

Disadvantage is that this will only work at low power levels.
The core with the high permeability will already saturate at low current values.

But still a very nice idea to investigate further.

wojwrobel

#23
June 06, 2010, 09:33:17 AM
Bruce

I know every second of his videos VERY WELL ;)

and the reason im posting this information is to streight it out , I HAVE TRIED MANY DAYS!! ;)

thats why im saying its not that easy as it looks !

wojsciech

teslaalset

#24
June 06, 2010, 10:06:59 AM
Quote from: wojwrobel on June 06, 2010, 09:33:17 AM
Bruce

I know every second of his videos VERY WELL ;)

and the reason im posting this information is to streight it out , I HAVE TRIED MANY DAYS!! ;)

thats why im saying its not that easy as it looks !

wojsciech

wojwrobel,
What kind of core materials did you use?
Any pictures of your setup?
Print
Go Up Pages 1 ... 3 4 5 6 7 ... 74
User actions