found on yahoo group "WaterFuel1978"
http://www.youtube.com/watch?v=Clafqu0Xw6E&mode=related&search=
http://www.youtube.com/watch?v=D7BAODqqcpQ&mode=related&search=
hello all
i have the compleet video's from stanley a meyer
colorado 1993 part 1 , 2 , 3. total of 1623MB.
zwitserland 1989 part 1 , 2. total of 942MB.
new zealand 1989 part 1 , 2 , 3 , 4. total of 2427MB.
all regarding the fuel cell and the explanation of the circuit.
( got them with downloadprogramm emule)
greets ernst muntinga
the netherlands
if you can upload them please do!
upload to where
Hi everyone, Just in case you thought I was full of BS read this on Zigouras Racing:
http://blog.waterforfuel.com/2007/03/17/sky-driver-airlines-dropping-you-off-exactly-where-you-need-to-be.aspx#Comment
As you can see the US has it head in the ground like an osterage, hoping things will just get better somehow. I was really counting on Zigs too come through, since Hypowerfuel.com seems to have stopped for some reason also. waterforfuel.com is so close to getting things working I hope he makes it. I need more time and money always too broke to get things done in a timely fashion. Gas where I am is 335 a gallon now, just because, for there is no Huricain, or full scale war to blaim this time. The weather is good, we are at peace, just helping that country to get on their feet, so why the big increase in fuel prices?
It just makes me angry to see technology being supresst, and we really need it now. To many people are going without power that have families to raise, but the cost of living just is too much for them too bare.
Meyer's technology really works, it just needs some fine tunning is all. High voltage and low current do a number to water, Zigs was electrolizing aproximently two gallons a minute, and that's way more than any car would need to run on. I want to save our oil for it is needed to make plastics or do we want a clay TV box ???. I hate the way things are looking for it seems we have no future pass 2025, and the Government is fine with that, go figure.
Quote from: EMuntinga on March 18, 2007, 10:37:24 AM
upload to where
here:
https://www.google.com/accounts/ServiceLogin?service=videoonline&nui=1&sendvemail=false&skipvpage=true&hl=en&continue=http%3A%2F%2Fvideo.google.com%2Fvideouploadform%3Futm_campaign%3Dgv-ww-hdr%26utm_source%3DEM%26utm_medium%3Dlink%26hl%3Den
or join this group and add to files:
http://tech.groups.yahoo.com/group/watercar/
http://my.opera.com/h2earth/blog/ This site has good info on how to get Meyer's technology up and working.
This is my design solution to the Meyer's technology that I should have built in the neer future.
Only time will tell if I can get it working or not, for it is untested, but I do seem to be learning a lot on the Meyer's technology, so hopefully it will work. Learned something new on this today, the "Voltage Intesifier Circut" Has to be matched to the water fuel capacitor(WFC) that it is going to be used for. First find out the capacitance of the WFC and then match the "Voltage Intesifier Circut" to the WFC.
I can remember when I first heard of aquamist, put on a Lotus turbo. I was very impressed then with what I saw, and that was over 20 years ago I think. When I read this study http://www1.eere.energy.gov/hydrogenandfuelcells/tech_validation/pdfs/fcm03r0.pdf
I knew that water was the answer to solving the pre-ignition problems in that a water mist device will put an end to the hot spots inside of the intake system.
Now this is the techology I am following for this unit is working on the electronic's http://youtube.com/watch?v=miwbvsya3Ek&mode=user&search=
I have up graded from his circut in that I matched the diodes to the same speeds as the mosfet's and the 555 timer, and will add this too a Meyer's voltage intensifire circut, that has been match to the cell's capacitance.
Tell me what you think, good idea, bad idea?
Quote from: EMuntinga on March 17, 2007, 06:04:02 AM
hello all
i have the compleet video's from stanley a meyer
colorado 1993 part 1 , 2 , 3. total of 1623MB.
zwitserland 1989 part 1 , 2. total of 942MB.
new zealand 1989 part 1 , 2 , 3 , 4. total of 2427MB.
all regarding the fuel cell and the explanation of the circuit.
( got them with downloadprogramm emule)
greets ernst muntinga
the netherlands
Ernst,
We are still waiting. But there are some new Meyer videos that I had not seen before:
http://www.youtube.com/watch?v=D7BAODqqcpQ&mode=related&search=
http://www.youtube.com/watch?v=-7aOderfbGU&mode=related&search=
http://www.youtube.com/watch?v=RRXlm5AO9mY&mode=related&search=
http://www.youtube.com/watch?v=OptNWzN5hsA&mode=related&search=
AM
There's seems to be many of his vid's on eMule. I'm waiting to download them now. you can dl eMule from here, I looked at some other places to dl but it required money, they were different sites and different methods of payment so they're probably scams, this one is free though.
http://sourceforge.net/projects/emule/
This is just about all you need to know on getting Mr. Meyer's technology to work, just note that you will need a VIC circut and too match the diodes used to the 555's and mosfet's switching speeds.
Well I was just looking for the MeyerRep.pdf file online and it seems the MIB guys have pulled it from just about everywhere, for it can't be found. See they are not messing with Magdrive for all he has is mileage boosters, but they are going through great lengths too stamp out Mr. Meyer's ideas. I am still shocked that I can't find it online, not even on PESWiki.
So everyone best get this while they can for it can nolonger be found on the open net.
Quote from: h20power on March 30, 2007, 03:32:40 PM
This is just about all you need to know on getting Mr. Meyer's technology to work, just note that you will need a VIC circut and too match the diodes used to the 555's and mosfet's switching speeds.
Well I was just looking for the MeyerRep.pdf file online and it seems the MIB guys have pulled it from just about everywhere, for it can't be found. See they are not messing with Magdrive for all he has is mileage boosters, but they are going through great lengths too stamp out Mr. Meyer's ideas. I am still shocked that I can't find it online, not even on PESWiki.
So everyone best get this while they can for it can nolonger be found on the open net.
h2opower,
Can you confirm that have replicated any water fracturing techniques or expain how you know that Dave Lawtons circuit results in any useful replication of Meyers achievements?
AM
Hi, on this video he is using the electronic's: http://youtube.com/watch?v=miwbvsya3Ek&mode=user&search=
All I can say is someone has saw fit to block this pdf file, try to look it up for yourself and see what you get.
Secondly, just make one they don't cost much and run some test yourself, plus look at this explaination given on Meyer's technology: http://youtube.com/watch?v=bqfiAXIs3Xc
Here's another pdf about pulsed electrolisis, it's a lot like Meyer's
Hi, it looks very simular too Exogen technology. I guess Meyer's was the only one that used VIC circut, but looks like it will work too. My guess is maybe there is more than one way to get the job done. Thanks for the info :)
newly released pdf.
"First-ever interview with Stanley Meyer's twin brother,Stephen."
http://www.blogtalkradio.com/waterfuelmuseum
Quote from: h20power on March 30, 2007, 03:32:40 PM
This is just about all you need to know on getting Mr. Meyer's technology to work, just note that you will need a VIC circut and too match the diodes used to the 555's and mosfet's switching speeds.
Well I was just looking for the MeyerRep.pdf file online and it seems the MIB guys have pulled it from just about everywhere, for it can't be found. See they are not messing with Magdrive for all he has is mileage boosters, but they are going through great lengths too stamp out Mr. Meyer's ideas. I am still shocked that I can't find it online, not even on PESWiki.
So everyone best get this while they can for it can nolonger be found on the open net.
um... not quite your spooky alien coverup:
http://www.web-space.tv/free-energy/
(refresh the page to get through the ads)
Check the Torrent sites for an archive i've put up.
Tripled
Quote from: buzneg on April 02, 2007, 12:51:21 AM
newly released pdf.
again not quite. i released this 8 months ago:
http://www.conspiracycentral.net:6969/stats.html?info_hash=24aef66e44a4eda1bf96288b54b419b9c40e2353
http://www.demonoid.com/files/details/440789/1360737/
http://conspiracycentral.info/index.php?showtopic=685&hl=
Tripled
I did use the word, "Just." or you didn't read that. I'm trying to work with Mr. Lawton and others right now, so at least I am trying.
For I see no video of yours, but do see two of theirs. I am following Mr. Lawton's work is all, just trying to do my part to save the planet.
Quote from: h20power on April 03, 2007, 05:17:22 PM
I did use the word, "Just." or you didn't read that. I'm trying to work with Mr. Lawton and others right now, so at least I am trying.
For I see no video of yours, but do see two of theirs. I am following Mr. Lawton's work is all, just trying to do my part to save the planet.
can't save the "planet" if you can't save yourself from playing word games on an anonomous message board.
8 months is not "just" no matter how many ways you slice it.
and if your working on this, what is the purpose of the red "laser" apparatus described in meyer' patents, and how does the principle involved operate?
Tripled
PS: buzneg, why are you posting under 2 aliases? and if not why is h2 0power posting in reply for you?
Just who are you anyways. You don't have a working unit, your still stuck thinking it is a resonate deivce when it is not. At least I am trying to help, all you do is try to decourage, most likely your with the MIB. And I only have one on this site and that's h20power.
Most of use aren't working on the spark plug looking device that Meryer had, that I belive is going to be lost for a long time to come, unless you have it all figured out ???
In anycase just trying is better than sitting on your ass. Like Ironhead's motto, Just build it.
So are you doing your part ??? I think not your just another gasoline junky clinging to the old ways. Am I right? Your car is strait gasoline, your home has no solar panols, and you always tell people that gasoline is the way to go for, in your mind, it's going to last forever. You need to wake up and smell the coffee, Jim.
This is my goal: http://www.youtube.com/watch?v=miwbvsya3Ek&NR=1
Deleted
Was not my place to answer this question.
Well put Ironhead. But I wasn't going to tell him, for I think it's Jim.
Quote from: IronHead on April 04, 2007, 07:32:35 AM
"Tripled", I don't really like your attitude , but will answer the question about the red laser anyway. I answer this question for everyone involved to understand .
When Hydrogen and Oxygen are pulled from there electron bond . The electrons will scatter ,then they will try to re-attach (Order). This means that Hydrogen and the Oxygen will try to bond back to the water state once out of the positive and negative electric field. Free negative electrons will recombined the structure.
So if we "lase" the area with the correct electromagnetic spectrum, 650 nm - 750 nm ,bombarding the electrons with photons to bring them to a higher state. Which weakens the attraction. We can absorb these now higher state electrons into an electric apparatus or circuit maintaining our 2H2 O2 separation.
Just Build It
It will Teach you
IronHead
i'm not concerned about what you like or dislike.
And if your going to TRY and answer something that was not put to you then at least make a credible reply, instead of spouting off some mumble jumble BS about photons, electrons and some electromagnetic wavelength crap.
The question was why a "RED LASER" is specified, and what's the principle involved with the "RED" laser.
You know, there's a reason why Stanley Meyer purposely obfuscated his patents, and that's so ignorant little children would not go around and blow other people up with there sudo-scientific parlour tricks, trying to do something they do not understand.
Tripled
Quote from: h20power on April 04, 2007, 03:05:57 AM
Just who are you anyways. You don't have a working unit, your still stuck thinking it is a resonate deivce when it is not. At least I am trying to help, all you do is try to decourage, most likely your with the MIB. And I only have one on this site and that's h20power.
Most of use aren't working on the spark plug looking device that Meryer had, that I belive is going to be lost for a long time to come, unless you have it all figured out ???
In anycase just trying is better than sitting on your ass. Like Ironhead's motto, Just build it.
So are you doing your part ??? I think not your just another gasoline junky clinging to the old ways. Am I right? Your car is strait gasoline, your home has no solar panols, and you always tell people that gasoline is the way to go for, in your mind, it's going to last forever. You need to wake up and smell the coffee, Jim.
This is my goal: http://www.youtube.com/watch?v=miwbvsya3Ek&NR=1
Considering your lack of imagination in regards to a "Stanley Meyer Fuel Cell" design, that
Quote from: h20powerthat I should have built in the neer future.
I might suggest for the safety of other human beings around you, that you stick to your cheap 3D drawing program, and stop playing with "toys" you have absolutely no understanding of.
Tripled
Yeah this Tiplead is a is an enemy of the Hydrogen Revolution and these statements prove it, and he is also a racist no doubt.
As you can see everyone the movement has it's enemies. You are witness to one of their followers willing to lay down his life too keep with the status quo that is in effect today.
So pay no mind to him, he has nothing positive to say and contributes not. He is full of misinformation aim to confuse and slow the movement. His attacks are at my rendering for petes sake, like I am going to go all out and with mega time on a drawing. It's AutoCAD 2007 if you must know.
That rendering was to show that I haven't given up the fight. When Zigouras Racing was threaten by your MIB thugs and forced to sell out, I was feeling pretty low. The positive people on overunity gave me hope again.
Since you have nothing good to say why don't you go away for eight months again, we could all use that kind of help from you.
Quote from: h20power on April 04, 2007, 12:18:25 PM
Yeah this Tiplead is a is an enemy of the Hydrogen Revolution and these statements prove it, and he is also a racist no doubt.
As you can see everyone the movement has it's enemies. You are witness to one of their followers willing to lay down his life too keep with the status quo that is in effect today.
So pay no mind to him, he has nothing positive to say and contributes not. He is full of misinformation aim to confuse and slow the movement. His attacks are at my rendering for petes sake, like I am going to go all out and with mega time on a drawing. It's AutoCAD 2007 if you must know.
That rendering was to show that I haven't given up the fight. When Zigouras Racing was threaten by your MIB thugs and forced to sell out, I was feeling pretty low. The positive people on overunity gave me hope again.
Since you have nothing good to say why don't you go away for eight months again, we could all use that kind of help from you.
Spoken like the true comrade shill that you are.
It's too bad your imagination was not as good in a picture program as it is with your childish words that you use, you may even have come up with a much more reasonable representation of Mr. Meyer' imagination than your own.
And considering your cult worshiping tendencies, it would probably be better for you to stick to prozac, probably better for everyone else.
Tripled
Well I'm not sure whats going on with everything here ,but here is a little setup based on Meyers mixed with a Neutral plate design. This has a 5 watt IR led light (From Night Vision Scope) involved and pulling electrons off the water with a cap and DC motor. Very good outcome here.
I just thought I might post it as it has to do with what your talking about .
If I am wrong to post it here I will take it else where. Let me know?
Quote from: IronHead on April 04, 2007, 12:53:07 PM
Well I'm not sure whats going on with everything here ,but here is a little setup based on Meyers mixed with a Neutral plate design. This has a 5 watt IR led light involved and pulling electrons off the water with a cap and DC motor. Very good outcome here.
I just thought I might post it as it has to do with what your talking about .
If I am wrong to post it here I will take it else where. Let me know?
What is going on is h20power/buzneg spreading FUD in regards to Stanley Meyer' Patents in a thread i posted on another board, and he/she does not appreciate being called on it.
Anyways;
The energy stored in an "atom" or "molecule" that is released when the "atom" "molecule" is "broken" is infared energy or heat if you like.
What happens when you increase the amount of infared energy in an "atom" "molecule" before it is "broken"?
The Picture; Interesting, very nice too see someone actually putting one's mind into something. ;)
Is that just a homemade battery box or a "sudo" freq. generator on the right? Forgive me again, but i do not see the Neutral, you have many plates in between the "wired" plates? Some rather large wires attached also == lots of current?
Don't let the wife see this setup, she'll have you out the door in no time :-)
Try the alternator setup, that is posted in the previous link i provided, with alternating "+" - "n" - "-" plates attached to the wiring. or see how Stephen Meyer' has done it in his Patent. It's in one of the device pdf's on the site.
Great Stuff though!
Tripled
PS: why not just post it again Tripled;
http://www.web-space.tv/free-energy/
PSS: Yes i should also have mentioned, this works best on "voltage" rather than "current"
PSSS: Good catch on the waterfuelmuseum show!
Nice going Ironhead, keep the movement alive.
I posted this awhile back: The effects of Vacuum on electrolysis
Here is the math of the process: at 1 ATM and 298K the energy requirments are;
W = PÃŽâ€V = (101.30 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 3.715 KJ (this is part A to B on the graph area under the curve)
At .2 ATM and 298k the energy requirments are;
W = PÃŽâ€V = (20.260 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 0.7431 KJ ( this is B to C on the graph area under the curve)
At .1 ATM and 298k the energy requirments are;
W = PÃŽâ€V = (10.130 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 0.3715 KJ (end of graph)
Notice the change in energy needed to break water down . You are not going to find this in any books for I figured it out. This applies to Faradays electrolysis, not too sure of it's affects on Meyer's work.
I am nolonger going to engage Tripled in idle conversation, for it is fuitless and to the point a foolish waste of time :o. He has nothing too teach, just full of misinformation intended to divide and confuse people just starting out in the movement >:(.
P.S. good work Ironhead.
Quote from: h20power on April 04, 2007, 01:29:29 PM
Nice going Ironhead, keep the movement alive.
I posted this awhile back:
Here is the math of the process: at 1 ATM and 298K the energy requirments are;
W = PÃŽâ€V = (101.30 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 3.715 KJ (this is part A to B on the graph area under the curve)
At .2 ATM and 298k the energy requirments are;
W = PÃŽâ€V = (20.260 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 0.7431 KJ ( this is B to C on the graph area under the curve)
At .1 ATM and 298k the energy requirments are;
W = PÃŽâ€V = (10.130 x 10^3 Pa)(1.5 moles)(22.4 x 10^-3 m^3/mol)(298K/273K) = 0.3715 KJ (end of graph)
Notice the change in energy needed to break water down . You are not going to find this in any books for I figured it out. This applies to Faradays electrolysis, not too sure of it's affects on Meyer's work.
I am nolonger going to engage Tripled in idle conversation, for it is fuitless and to the point a foolish waste of time :o. He has nothing too teach, just full of misinformation intended to divide and confuse people just starting out in the movement >:(.
P.S. good work Ironhead.
You have a sad tendency of trying to get people to do what you want them to do, don't you?
I seem to remember some other people in this lifetime that had similar dreams of grandure, let me see.... yes one comes to mind:
Charles
Now go get your diaper changed and leave some of these "honest inquiring minds" alone.
Tripled
Yes ,the box to the right is a 36 volt AGM battery , current is about 10 amps.
Plates are like this + nnnnn - nnnnn + this works very well and is producing more gas than anything I have seen in this type of direct cell . Meaning a cell that is not pulsed or built like a cap. No electronics on this one. I have found that with this little motor cap design that the gas is stronger , more bang.
Meyers has done great work but I am producing more HHO in a small format with another design on the High Voltage HHO page. More I say than I have seen in his videos.
Although I have no Idea what he was producing with his modified spark plug laser cell.
I am now thinking about this whole laser idea to increase production.
I did the alternator deal years ago, works very well with good fuel outcome.
My advantage is no kids no wifey
Just Build It
IronHead
Quote from: IronHead on April 04, 2007, 01:42:04 PM
Yes ,the box to the right is a 36 volt AGM battery , current is about 10 amps.
Plates are like this + nnnnn - nnnnn + this works very well and is producing more gas than anything I have seen in this type of direct cell . Meaning a cell that is not pulsed or built like a cap. No electronics on this one.I have found the with this little motor cap design that the gas is stronger , more bang.
Meyers has done great work but I am producing more HHO in a small format with another design on the High Voltage HHO page. More I say than I have seen in his videos.
Although I have no Idea what he was producing with his modified spark plug laser cell.
I am now thinking about this whole laser idea to increase production.
I did the alternator deal years ago, works very well will good fuel outcome.
My advantage is no kids no wifey
Just Build It
IronHead
I think if you go through his papers you'll see it's all in the "Taper" design of the injector, hence the "explosive outcome" inside the cylinder when released.
Do you think a "True" red LED would have the same effect on increasing the "infared energy" within the "atom" "molecule"? ;-)
Tripled
No but I build till I get it right. I will try anything I can get my hands on including many different light sources at least till I know the correct spectrum and build a laser accordingly .
Here is a short production video sorry the cam is dieing . I light this and it is a very large strong bang , will ring your ears for awhile.
The cell is alittle hot right now about 120*F
Nice going Ironhead, looks very impressive. Did you use any electrolites? Once my unit is built I hope it has that kind of gas production.
Yes ,there is about 5mg of KOH in this cell , had to do it as I used distilled water.
Then give it a sec to charge at 12 VDC the first time out then switch it over to 36VDC. Also these are Nitronic 50 Stainless steel plates in there.There is no trash in that water the IR light and the iris of the cam make it look that way.
This is just a test cell wait till you see the big boys that I am doing a video on.
Just Build It
No steam just bubbles
IronHead
Nice job, Ironhead.
Quote from: IronHead on April 04, 2007, 02:10:55 PM
No but I build till I get it right. I will try anything I can get my hands on including many different light sources at least till I know the correct spectrum and build a laser accordingly .
Actually i was being a tad facetious with the question's in a way.
I was posting the questions for you, not at you.
The spectrum you want is the infared spectrum, heat is what were after in the cylinder. This is why we need a much more efficient cooling system in a car when runing hydrogen and oxygen, more infared energy produced.
Increase the infared energy in a hydrogen and oxygen molecule, then let them join, would increase the infared energy output of said joining.
This is why you do not require a spark plug in an ICE when using an injector such as Meyer'.
This is also why he has "inert" gases mixed in before the cylinder so the more "energized " hydrogen and oxygen molecules do not join while on route from the cell to the cylinder.
Also, have a look at his "Light Guide Lens" Patent US-4275950
http://www.freepatentsonline.com/
Tripled
Ok, I jacked this thread long enough.
Thanks for the support and infos everyone.
Making bubbles
IronHead
Wait I have a question.
What wavelength would be proper for this concept.
http://www.roithner-laser.com/LP-laserdiodesIR.htm
Quote from: IronHead on April 04, 2007, 04:46:03 PM
Wait I have a question.
What wavelength would be proper for this concept.
http://www.roithner-laser.com/LP-laserdiodesIR.htm
just a note, you are quite aware this is very dangerous if not done and understood properly... yes?
and i'm not being patronising here.
i say this because the "gas" produced is very very volatile, and must be done in very strict and proper manor. this is not an ordinary build at home device using electrolysis.
those diodes WILL pack an awfull amount of energy into any gas produced using Stanley Meyers design.
in other words, this is not about simply throwing a home build water fracturing device into one's car and pumping the resulting gas into the intact. there's a reason Mr Meyer' design does not require any ignition spark for the gas he produced with his design.
now is time i think you might want too re-read his information and to get a much
greater understanding for his invention.
THIS SHIT WILL BLOW UP ON YOU IF YOUR NOT RESPONSIBLE FOR IT.
Just some friendly words of advice.
Cheers
Tripled
Ironhead, you have truly out done Magdrive with this one. Now box it up and give power to the people 8)
Building IR laser and apparatus in the hot zone now.
This cell is built with the utmost precautions and in a very small
apparatus, about the size of a D cell battery. This is an open cell
design in case of massive production the cell will have no chance
to pressurize. The Hot zone is a lab area with the proper ventalation
shielding and control to do such a build.
Just Build It
IronHead
Conceptual High Voltage HHO injector design based on IR laser injection and negative electron extraction.
Quote from: IronHead on April 05, 2007, 09:37:42 PM
Building IR laser and apparatus in the hot zone now.
This cell is built with the utmost precautions and in a very small
apparatus, about the size of a D cell battery. This is an open cell
design in case of massive production the cell will have no chance
to pressurize. The Hot zone is a lab area with the proper ventalation
shielding and control to do such a build.
Just Build It
IronHead
The Cell is strickly for producing the "Gas". All treatment of the Gas is done in a seperate apparatus, down stream of the cell.
The laser is not for producing more Gas, but for increasing the energy level of the gas produced. The more "energized" molecules become more "unstable" in a reactive kind of way, making them extremely volatile, hence the need to thoroughly mix exhaust gases (being inert) to prevent a reactence between the Hydrogen and Oxygen.
Quote from: Stanely Meyer-The Birth of New Technology
The Energy Contained in a gallon of Water, exceeds 2.5 million barrels of oil when equated in terms of atomic energy.
In other words, do not laser the reaction cell. You would need a burner setup with an exhaust "piping" plumbed to mix with the "laser" conditioned" gases.
Tripled
yes this cell is 2 parts the upper part is where treatment is happening.
Adding exhaust gases hmm I did not think of that , Adjustments will be made for exhaust inject in to the treatment chamber .
On the bench what do you think about using CO2 as a stabilizer?
I uploaded some more video's. This is a 4 Part vid.
http://video.google.com/videosearch?q=stan+Meyer+-+New+Zealand&hl=en
the other's will be up in some hours
Quote from: IronHead on April 06, 2007, 01:40:26 PM
yes this cell is 2 parts the upper part is where treatment is happening.
Adding exhaust gases hmm I did not think of that , Adjustments will be made for exhaust inject in to the treatment chamber .
On the bench what do you think about using CO2 as a stabilizer?
hm, i think if your going to get into this territory, you should do a small I.C.E setup. You'll know if your on the right track with laser priming if it runs without a spark.
If you get it going, then use those exhaust gases for "blocking", which would give you inert gases for the mixture.
Chicken or egg?
This would be a test for the priming of the gases. He's not using "explosive gas" output as a "catch phrase" ;) If you have a proper conditioning cell setup, and working with an I.C.E, the you know it's a viable solution.
Well, except for the $450.00 starting price for those diodes....
This "priming of the gas" can also be accomplished without using these laser diodes. As demonstrated with his Injector.
Tripled
I agree
The 760 and 820 Laser moduals are on the way. I will buy them all if I have to. These all use the same power supply.
So they will be socket fitted to change them out when I get that far along.For now they are just stock till everything else is done.
One Step at a Time
IronHead
HI Everyone, this is just out;
I just got it built and am ready for testing, but the WFC is going to take a bit longer to build. The tubes where out of stock, and the press I need is sold out. I hope this thing can power my protoype for it is way more than just five or six tubes.
And nice to talk to you Ironhead, talk care and have fun.
Just found the perfect lower outer casing for the HHO Injector project.
Very well built super strong Red Dot Rifle Scope.
This will save some machine time.
Quote from: IronHead on April 09, 2007, 07:34:28 PM
~
This will save some machine time.
~
Milling Machine, Milling Machine... my bloody Grand National for a Milling Machine.
(sung to My Kingdom for a Horse)
Myself personally, i would go with design/making from scratch.
(easy to say for the guy without a Milling Machine)
You know, that scope just might come in handy in the near future....;-)
Tripled
Will build it from junk till it produces then redesign and mac out a pretty one.
I have a mounted thermal scope for other uses.
Quote from: IronHead on April 10, 2007, 07:04:02 AM
Will build it from junk till it produces then redesign and mac out a pretty one.
I have a mounted thermal scope for other uses.
Have you seen these yet:
Stanley.A.Meyer-Einsiedeln.Switzerland.1989 video's?
You should maybe give them a look, you still may be able to get your money back on the diodes.
Tripled
do you have a link . if there not the right ones I will use for IR laser night scopes I build.
Quote from: IronHead on April 11, 2007, 10:32:00 PM
do you have a link . if there not the right ones I will use for IR laser night scopes I build.
i'm putting them up now...actually i'm putting his New Zealand House meeting up now on bittorrent:
http://www.bt-chat.com/?mode=details&info_hash=1d7a9a0de9b5d38e2671ed32004c672e99232410
No account required here, but you do need a bittorrent client. I'll have 5 more videos up by sunday. The Einsiedeln Switzerland one's will be included here.
Oh yes, those New Zealand one's can be found on google video also. Search Stan Meyer. Someone at Overunity here put them up.
Tripled
WOW big very very slow download.
This is what I am basing my work on, is it the same?
March06
http://www.youtube.com/watch?v=-7aOderfbGU&mode=user&search=
http://www.youtube.com/watch?v=Clafqu0Xw6E
Quote from: IronHead on April 12, 2007, 10:24:56 AM
WOW big very very slow download.
This is what I am basing my work on, is it the same?
March06
http://www.youtube.com/watch?v=-7aOderfbGU&mode=user&search=
http://www.youtube.com/watch?v=Clafqu0Xw6E
Think of these Videos as the "Full" Lecture, not tidbits of the "machine".
Those are from the Einsiedeln Switzerland Conference.
Not so slow now. Full copies with multiple seeders are out now. You really need the entire lecture to appreciate the "scope" if you will. ;)
Try here:
http://video.google.ca/videosearch?q=Stan+Meyer
Tripled
here's a radio blog. Stephen Meyer, Stan's brother gets interviewed.
http://www.blogtalkradio.com/waterfuel2007
Thanks for the videos TripleD
Enlighting is all I can say.
Quote from: IronHead on April 13, 2007, 07:45:25 PM
Thanks for the videos TripleD
Enlighting is all I can say.
I have 5 more i will be putting up sometime next week also.
Tripled
h2opower
Do you know what the gating frequency ranges are...The first 3 ranges?
Also same question for the Oscillator Frequency Range there is also 3 frequencies that you could have...
Quote from: h20power on April 07, 2007, 04:57:06 AM
HI Everyone, this is just out;
I just got it built and am ready for testing, but the WFC is going to take a bit longer to build. The tubes where out of stock, and the press I need is sold out. I hope this thing can power my protoype for it is way more than just five or six tubes.
And nice to talk to you Ironhead, talk care and have fun.
I'm still testing it out got it at the college right now, okay?
out of curiousity, has anyone tryied using high freq/high voltage low/amps?
I am talking like 30khz 40kv and milliamps dc.
will be soon...right know I'm in the middle of wrapping the toroid. Parts are on order for the Lawtons/meyers vic should be here next week.
Yes, Araron has gotten it to work, look on this site: http://blog.waterforfuel.com/2007/04/07/and-the-winner-of-the-free-water-powered-vehicle-is.aspx#Comment
As soon as I map out the electronics, I should get mines up and running, too ;).
I am gonna use a car ignition coils, easier to find. the signal/power generator is finished. Getting some plates tonight. the only problem I have found is that when I fire up the coil everything is energized to the coils voltage/freq. And I mean everything the entire system, every wire, the control box, all the way back to the 120v/12v ac xfrmr. I have tried diodes but the voltage is too high and goes right through them. Anyone have an idea of how to block this voltage and bounce it back to the coil? Serious amounts of harmonics/resonance. I can't take any measurements of voltage anywhere in the system, as soon as I fire it up every meter in a 10' radius, freaks out and is completely useless. It doesn't matter if the meter is connected to wires or not, they freak out the same. The only meter that works is my ampmeter on the 120v input to the xfrmr which tells me I am drawing .015 to .04 amps @120v = 1.8 to 4.8 watts. Very little draw on the system, and a lot of electrical activity everywhere.
Go and find a set of microwave oven diodes. Might help. Those are the biggest diodes I could find...free if you go to a repair shop that has dead microwaves.
With the price of microwaves, I think it would be harder to find a repair shop, than to win the lotto.
wow
dime a dozen here.
another option would be to purchase a few...there only $2.50 each. american.
big HV diodes
http://search.ebay.com/tesla-diodes_W0QQfromZR40
thanks for the link
I couldnt access more than 30 seconds of this video then it would stop. Can someone point me to another location or upload to mega uploads? Thanks
http://www.youtube.com/watch?v=bqfiAXIs3Xc
I built the Lawton circuit and it works great!!!
www.potheadsofcomedy.com