Quote from: iflewmyown on October 20, 2008, 07:51:07 PM
Cranky, I have watched this ongoing experiment with great interest. It was my greatest hope that this was leading somewhere, and it might still, however I will ask the question no one else will. Your output compared to input sucks and I am wondering if there is data somewhere that shows a gain over normal efficiency of a normal generator. Just now in the shop I belted together two DC treadmill motors and clamped them to a table saw. The motor pulled 1.03 amps at 12.30 volts while driving the other one loaded as a generator. The load was the first 10 ohm resistor on the bench. The output was 3.94 volts at 1.24 amps. This was not meant to be an exhaustive study but did confirm for me that your efficiency is way way down. My generator with mismatched load is 38% efficient while in the California data you show .25% efficiency for your normal generator and 1.45% efficiency for the lenzless version. Cranky you asked one time how to enhance your presentation for companies coming to visit. You should start with a 95% efficient generator as a baseline and increase the efficiency and accelerate yours to beat it. If I have missed something I apologize.

DID YOUR GENERATOR CAUSE YOUR MOTOR TO ACCELERATE? NO
OR DID YOUR GENERATOR CAUSE YOUR MOTOR TO DECELERATE? YES

I AM NOT CONCERNED WITH EFFICIENCY AND NEVER HAVE BEEN - I AM CONCERNED WITH ENHANCING OUR GENERATOR COILS ABILITY TO ACCELERATE THE PRIME MOVER WHILE DELIVERING POWER - AND WHILE ENHANCING MY ABILITY TO UNDERSTAND IT AND EXPLAIN IT TO OTHERS WHEN THE TIME COMES TO DO SO.

NOW, I AM CONCERNED WITH ENHANCING OUR CONCENTRIC BI-COIL'S HIGH VOLTAGE COIL'S ABILITY TO ACCELERATE THE PRIME MOVER WHILST AT THE SAME TIME FEEDING IT'S DELAYED INDUCED MAGNETIC FIELD INTO THE HIGH CURRENT COILS AND ENHANCING THEIR GENERATED OUTPUT... ACTUALLY BEEN THERE DONE THAT... THE NEXT STEP IS FINDING THE UPPER LIMITS AND BEST DESIGN PARAMETERS.

SO I WILL BE READY WHEN AC'S PROPHECY COMES TRUE ABOUT ME LICKING SOME BUTT.

T

@Crankypants

QuoteSO I WILL BE READY WHEN AC'S PROPHECY COMES TRUE ABOUT ME LICKING SOME BUTT

Your one twisted sister Crankypants, well gotta run walmarts having a 1/2 price sale on satanic figurines and christmas is right around the corner.
Later
AC

Quote from: allcanadian on October 20, 2008, 08:18:55 PM
@CrankypantsYour one twisted sister Crankypants, well gotta run walmarts having a 1/2 price sale on satanic figurines and christmas is right around the corner.
Later
AC

DON'T FORGET MY PRESENT - THE BEST CHRISTMAS STORY EVER TOLD VIDEO: http://www.youtube.com/watch?v=NeEX-M7rHAc&feature=related

T

Hi allcanadian,

thank you for the explanation of the workings of the Pavel Imris capacitance driven electromagnets. I think I understand your explanation and I accept it as correct.

Quote from: allcanadian on October 20, 2008, 02:28:03 PM
.... I have found that a DC permanent magnet motor can be fully loaded and the only losses are ohmic resistance and thermal losses---What we consider as energy,the current flow, the watt-seconds are recovered-- in which case I had to ask what is it exactly that is powering the load?.

On www.energeticforum.com/renewable-energy/ user gmeat wrote:
"I'm so glad theres no conservation of work law"
I personally am also glad about that.

As to your question "what is it exactly that is powering the load?". I think the work to power the load is done by the force.
Which force?
Well, I think a force is the same as a potential difference. And you yourself explained, that with a capacitor one can obtain double the potential difference of the AC source potential.
So at certain moments within one cycle you have double the force at your disposal. This doubled force will do the work.
No?
However, to come up with a simple system, that incorporates this principle and can be built by almost anybody, remains a real challenge.

Quote from: allcanadian on October 20, 2008, 02:28:03 PM
I am posting this here because I think old crankypants is going to kick some ass in the near future and we should help him in any way we can.

Knock on wood.
Anyway, in case he does not do it soon, I hope you will.

DEAR ALL,

LUC SENT ME THIS EMAIL AND SEE MY REPLY...
IF YOU WANT TO HELP - PLEASES DO SO.
THANKS
Thane

Hi Thane,

I want to give you an update since we met.

The day I went to see you I saw a video that amazed me so I started working on replication of it to see if it really does what is seen in the video's below.

Here are the 2 videos:

http://www.youtube.com/watch?v=kQdcwDCBoNY

http://www.youtube.com/watch?v=Idey7O0WlU0

I am happy to say that it does do exactly what is seen in the video. It took a while to understand but today I fully replicated the effect.

Here is my video demo:

http://www.energetictube.com/play/Energy__Unsorted/Resonance_test_3

Luc

Dear Luc,

Please do come by or I can pick you up?
I watched the videos and asked him to show the power going into the signal generator?
Do you think you might be able to find a way to make this work with the transformer i.e. the primary at resonance feeding the secondaries? I have been trying to create a "news story" to stop the next planned terrorist attack in the USA but I have failed so far.

Cheers
Thane

Thane C. Heins
President - Potential +/- Difference Inc.

"Men occasionally stumble over the TRUTH, but most of them
pick themselves up and hurry off as if nothing ever happened..." - Winston Churchill

"Ignorance is NOT Bliss" Videos
http://video.google.com/videoplay?docid=-1656880303867390173&hl=en

Http://www.zeitgeistmovie.com/

Bush's Power Grab
http://www.youtube.com/watch?v=jatpX6kuxHQ&feature=related

US Pending Martial Law Video
http://www.organicconsumers.org/articles/article_15028.cfm

US Prision Camps
http://www.youtube.com/watch?v=0P-hvPJPTi4