Replacing the "Magnet Contact" with a Reed switch evolves this circuit:

https://www.youtube.com/watch?v=GfN5VfZdAPY


The only difference is that we are wrapping the AA battery to substitute as and replace the ferrite coil core!

Here's George Chaniotakis 16 X over unity with a vintage Reed switch:


https://www.youtube.com/watch?v=czI-wvjLork

Here's George's version of the "Magnet battery Oscillator". The "Reed switch" is doing the work of the contact:

George's setup is very similar to an earlier one of mine. I initiated several threads on the "Plasma Reed Switch". George's oscillator doubles it's fly back output when he doubles the copper in his bucking coils. The output is in direct proportion to the weight of copper in the coils.

The LED bulb is reverse biased and is powered by the backspike from the collapsing field. The more copper, the greater the electro-magnetic field and hence the more powerful the flyback from the collapse.

George has grown secretive lately about his schematics but he appears to have the positive from the 24 volt source attached to the coil junction and the positive from the 12 volt source on the other end of the "Reed Switch".

The input power is constant, caught and stored in the catcher battery, while the HV fly back output is doubling from the additional weight in copper in the coils alone; If not clearly over unity at this point, one can see the inevitability on the near horizon

Cianiotakis doubles his flyback output when he adds a second bucking coil; He could quadruple it by wrapping AA battery cores and running the "Reed Switch" along side the coils.