Quote from: antijon on April 19, 2021, 08:55:15 AM
Edward, even though I respect you for what you've accomplished and your knowledge in the subject, it's sad to read such racial sentiment from you. I'd like to tell you that your problems aren't because you're black, but with today's political environment and anti white rhetoric becoming the norm... well let's face it, if you're white and you don't call other whites racist or white supremacists, you become persona non grata. Instead, I'd just like to say that I hope you learn to accept responsibility for your own failures, even though it may seem easier, or even correct, to blame someone else (e.g. they didn't give me a loan because they were white, etc.). After all, in research we understand that failure breeds success, changing an approach changes the output, so why not also use that philosophy in our daily lives. No matter the pigment of our skin, we can still be successful if we try.

Listen, this is my life's story and you don't get to dictate how I choose to tell it as these are my life experiences. You act as I don't see what's going on around me nor do I see how I have been treated by these wicked people verses how they treat themselves. The school of hard knocks is real as I have had to live through it for more than 50 years now. I have had bricks thrown at me while I was simply walking while black, traffic stops where all the police had their weapons drawn and trained on me, and the list of things I have experienced in this life goes on and on. In general you guys are a wicked bunch of people as if one goes through your actually history it's all bad. Everyplace your little ships landed spelled doom for the indigenous populations that were already there. This is just the sad reality one will find if they go a digging through the history of your people, lots of fighting, war, with rumors' of more wars, and all the many spoils of war that come along with these massive acts of aggression.


For the most part I used to be very sharing with this technology but after years of piss poor treatment I simply clamed up. But what's the point? Anything that I have shared hasn't been followed by anyone even though I seem to be the only one approaching the working voltages needed to get this technology up and running. All I get is hate for the most part and disdain for my efforts so why bother? People act as if I own them something which is puzzling to me as last time I checked I was the one running all of these experiments, figuring out what tools I needed to use to be able to work effectively on this technology, and for the most part funding it all on my own, though I did get a little help from others which I am very thankful for by the way. This technology was far from simple and very tough to figure out as the science behind it all is something that is new to the world of science. I encourage people to do as I was doing and make use of the scientific method only to be told to shove that scientific method up my ass.


At what point would any of you have called it quits for the Open Source community?


https://www.youtube.com/watch?v=S6PaeTmviX4&ab_channel=TheRationalNational

We all have life stories, and though I doubt you'd care to hear mine, I can assure you that mine has been much more negatively affected by black people than yours has by whites. Reality isn't black and white, and I won't blame other black folks for the actions of individual men. Just like I won't bear the responsibility for the actions of the Spanish Conquistadors, the tribal leaders that sold Africans to slave traders, the plantation owners, etc. etc. Nor will I accept blame for whoever threw bricks at you, the police that scared you, etc. We're responsible for our own actions.

Best of luck in your endeavors, hope you can have a change of heart because that type of hatred is like a cancer that only brings self ruin.

Quote from: antijon on April 19, 2021, 03:04:40 PM
We all have life stories, and though I doubt you'd care to hear mine, I can assure you that mine has been much more negatively affected by black people than yours has by whites. Reality isn't black and white, and I won't blame other black folks for the actions of individual men. Just like I won't bear the responsibility for the actions of the Spanish Conquistadors, the tribal leaders that sold Africans to slave traders, the plantation owners, etc. etc. Nor will I accept blame for whoever threw bricks at you, the police that scared you, etc. We're responsible for our own actions.

Best of luck in your endeavors, hope you can have a change of heart because that type of hatred is like a cancer that only brings self ruin.

I'm not sure what you are talking about as all I am talking about is the realization of the truth. I don't hate these people that constantly do my people dirty but I also do not trust them due to the actions of their forefathers that they continue right to this very day. I've been banned many times out of these Open Source forums and a lot of times it's because I was attacked due to the color of my skin and I chose to fight back or like the most recent banning by Chris for pointing out racism which ended up contributing to the attack on this nation's capital as on his site there was a thread that was promoting the lie of widespread voter fraud. There are laws on the books right now that are aimed squarely at keeping people like me in their place in this society. All of this voter suppression is happening right now not in some distant past history book. My people are being gunned down in the streets, their businesses, their cars, and even their very homes right now. We are also still being lynched but law enforcement likes to call them suicides. https://www.youtube.com/watch?v=5DcLr2tVTrI&ab_channel=DemocracyNow%21

I have no hate in my heart just no more trust as my trust has gotten me hurt in the past. Plus these stories I tell are of actual events that happened to me in my life trust me there are many more. I'd would like to hear your story as perhaps it would shed some light on things a bit more. You say that black folks have been racists towards you but let me ask you this, did they ever stop you from getting that loan at the bank, or from buying a house or apartment? Did they ever stop you from getting a car or from getting a job? You see I really don't think you understand just what racism actually is as your people have the luxury of not actually needed to learn what their forefathers have done and are still doing to people. https://www.youtube.com/watch?v=hOxyCSsio3E&ab_channel=TheTruthRadio


The truth is all I speak of nothing more. But the lie is much preferred over the truth these days more than ever.


Now about Meyer's technology which is what we are supposed to be talking about these notes are very important but thus far I haven't seen anyone acknowledge that fact. It would seem that I, and less than a handful of others, are the last ones standing still working on this technology. For like many people tell me they simply can't get any high voltage to be applied to their water fuel cells. And thus they come up with the conclusion that it's impossible but here I stand showing that it is possible. From my observations most people come to this thread not to learn anything but to throw stones at me and/or to tell people not to listen to me or believe in what I am showing them as it's some sort of trick. I'm past all of that now as I simply gave up on teaching this technology to others long ago. Nope, now I just focus on what I need to do in order to get this technology into the hands of those that need it the most.


I'd like to believe that most people are good people but through my observations I have learned they are not. So, all I have left inside of me is my drive to keep with the plan I came up with many years ago that should allow me to live to tell the tale.


Edward

Quote
I also noticed that you don't have a differential probe

I have it. But in any case, and I can make it myself.
-----------------------------------------------------------------
p.s.I understand that the common wire of the probe must be isolated from ground.
We have to use this when repairing switching power supplies.
Inverter welding machines. 
The worst thing for me is not even the lack of money.
This is the absence of like-minded people, colleagues, assistants.
You, I see, are all right with that.

Quote from: kolbacict on April 20, 2021, 04:46:31 AM
I have it. But in any case, and I can make it myself.

The reason why we need a differential probe is this technology has an isolated side that is looking for a ground and we must not give it one. I learned of this problem when I was studying the 8xa circuit as each time I would hook up the normal probe to try and see what was going on it would trip the house breaker. I ask a friend who is good with electronics what was going on and he told me I had to get a Differential Probe. I got one from here: http://www.pintek.com.tw/product_classify/landersound-tail/index.php?Product_Site_Classify_SN=17072&PHPSESSID=5890h47fg3vot1buqeaut1fbt4&Company_SN=6002 Well, actually I got two from there as the first one wasn't rated high enough in it's voltage handling capabilities for this technology. But all in all I have three differential probes now as I was serious about solving this technology and I purchased this tool as it needs to have a percent error calculation to be able to be used for scientific work. This is what has people up in arms at me for showing high voltages being applied to the WFC as I had all the necessary tools to do so in a provable scientific way.


The photo you've shown is a good type of oscilloscope not a differential probe. And we don't make them we buy them so that the scientific community will believe the readings we show as those differential probes have a percent error calculation of the readings shown on the scope. If you make it you have to test it's percent error and that requires even more expensive testing equipment. You can't go cheap with this technology. You can try and find deals but not go cheap, is that understood?

You can see my differential probe hooked up to the WFC in this photo and I had a different one that I showed while at the 2013 Breakthrough Energy Movement held in Boulder, Colorado. This is why what I showed back then and now matters as I have the tools to show my work that is acceptable to the scientific community. I use wire that are rated to take the voltages this technology puts out and I even learned how to solder correctly for high voltage applications. I would have liked to have gone cheap but I already know that isn't acceptable to the scientific community. This is why anyone telling people that I'm faking it is looked at as a joke as I have shown my work in a manor that is acceptable to the scientific community.


In these photos I show my work. Notice the attention to detail and you can see one of the transformer soaked in transformer oil when I was trying to solve the transformer shorting out problems I was running into. And in this video I show a VIC transformer being vacuum resin sealed: [size=78%]https://www.youtube.com/watch?v=i0gH4IX5r7g[/size]
I have went out of my way to do things correctly in the manor in which I was taught my my college professors so that my work would be acceptable to the scientific community. I don't skimp or go cheap as I know what will happen if I do. This is what sets me apart from most people working on this technology.


I built everything you see here and purchased the needed tools to show my work in an acceptable manor to the scientific community.