Great work! Interesting work and progress, you have built something that actually will work!   
Beware of what you post, I have understood there are people here who must prevent this from succeeding.

@H2Opower

I'm sure that  your en-devour is one of the valid ones, here at the forum.
It's not my area and I would just be mostly in the way if I posted here
more often than I do.

Sometimes, I think it is the ones pushing the fears that are holding us
back, most.

Courage come from the heart, but somethings have changed and
nobody's has to be a martyr for this stuff to come forward.

I ask ...

that the many who    are     qualified to undertake a serious study
of  your materials, will do so and in short order.

Lets bring these things forward.

Thank you so much, for your years of dedication.

    regards
          floor

Thanks and know I don't mind the warnings as I've had to fight the whole way thus far so why quit now?


Right now I think I am on the slow part of the tech in trying to get the rest of the materials I need to finish things up. My one contact that I use to get some of my material from isn't working at that place anymore for reasons unknown to me at the moment. But I have a lot of stuff on order and must simply wait it out until these things come in. This is a costly technology when you don't have a lot coming in to fund it. I keep my head up as I know I've already done the most important part in solving the technology and then posting the science behind it for all to have free of charge. The primary reason for doing such a thing was I noticed that what everyone else that came before me had in common was when they passed away they took what they knew about this technology with them in death. Now that pattern of loss has been broken so in the event of my death the science behind this technology will forever live on the internet. Once I shared the actual science behind this technology my death would now mean nothing as the cat is out of the bag.


In time I hope this technology brings on the change we need to have happen to do something meaningful about our shared climate change problems. When I look out at most of the other technologies this one still has the most promise to end fossil fuel use for practically everything we now use fossil fuels for right now. From planes, and trains, too power generation, and transportation this technology has it covered. Getting started is the hardest part as it's not easy to bring things to the marketplace as that is when a company will face it's hardest times. I think this year will be the year things finally kick off.


Take care all and again much thanks to those that have moved to support the cause: [size=78%]https://www.gofundme.com/f/energy-independence-for-you-and-me[/size]


Shalom,
Edward

Cut my first piece of glass today and while it's not perfect the bobbins fit in nice and snug. The reason for doing this is to save on the high voltage transformer resin use as it's hard to come by and on the costly side. I have a two gallon vacuum chamber and that would be a whole lot of resin wasted if I were to fill it to cover these bobbins. So now I just add the resin to the jar I cut and sanded smooth so that it doesn't cut me, lol, and save on resin use.
For the most part this is how I work as cost cutting is good for the pocketbook, but if I have no choice then I save up and pony up the cash. Thanks to all that have donated to the cause as your help is what's needed so that this technology can do what it was created to do. For those sitting on the fence now it the time to help out with whatever you can spare as this is going to be the year this technology comes out as I can feel it: [size=78%]https://www.gofundme.com/f/energy-independence-for-you-and-me[/size]


Shalom Everyone,
Edward Mitchell

Good luck. Shouldn't be hard to crack, if you ignore the fluff he put in the patents and videos to throw off anyone trying to use them to reproduce the effects. Remember, he wanted to make money off of the idea, and what I mentioned is standard practice in both cases concerning such for anyone, including Tesla (why his stuff is so hard to reproduce accurately using the patents).


I have gone over all of his (Stanley Meyers) patents recently since they have all expired, as well as various videos. The videos are generally a waste of time, excepting one where he lets slip a lot more than he realized, where he was trying to impress someone (unknown) with a video camera concerning the famous car.


When it might be viewed, eventually, by someone like me, that is a horrible mistake.


I took notes of the relevant characteristics of how the system worked. This allowed me to weed out a LOT of fluff and BS, like the whole laser thing. The system is based upon a type of resonance, treating the water as a dielectric in a capacitor, intentionally trying for efficiency of dielectric breakdown utilizing high voltage at high frequency. Fifty thousand build types could easily perform the feat, though specific capacitor designs would probably be more efficient. Basically, he used destructive, reinforcing resonance.


I will explain destructive resonance. Destructive resonance does not need a lot of energy, since the amount applied, if exactly at Q, is completely or mostly absorbed within a substance. This has to do with not only the substance material, but by it's shape as well. That is how a certain pitch can shatter a crystal glass over time, since each vibration absorbed makes the glass vibrate harder, until the absorbed energy is sufficient to cause the lattices in the crystals to separate. High frequency electricity is already heck on dielectrics, piercing glass (a usually good dielectric) as if it wasn't there. The problem is that you want a resonating field, and not an arc, which limits the applied voltage to the dielectric, or modifies your capacitor to suit the applied voltage.


You want the water molecules to align, then hit them with a sharp pulse to fracture them at the right time. Concerning the supposed need of a laser -- remember that his videos showing his early working units often had NO light source other than ambient. No other energy source other than the power source, for the device he took to the patent office, as one specific.


Sounds easy right? Its not, rofl, no more than it is easy to knock down a building using destructive resonance, or drill through rock with sound using the same principles, but it can be done.


It is about as easy as accurately tuning an actual Tesla coil to Q, instead of making a Tesla coil shaped device that puts out arcs and can make music. Just because it looks like a Tesla coil and operates on high frequency and voltages, does not make it an intentionally engineered device, whether achieved initially by intention (Tesla) or by accident, trial and experimentation (most inventors like Stanley who start out with a good idea).


Stanley even ripped off some of Tesla's drawings for his patents, which I find hilarious and somehow honorific to Tesla -- both at the same time. He was basing his idea on Tesla's work, so it makes sense, though I think he could have done without that part.


Only the three lobed waveform lines up with explanations, by the way. It would probably be better to use an exciting field to line up the water molecules, then hit with as close to a voltage only (as high as possible without arcing through the dielectric) spike as possible.


I suggest experimenting with tuned D'Arsonval style autotransformer coil if you intend to use capacitive based current spikes instead, as that coil style is high amperage/high voltage/high frequency. 15Watts is 15watts, whether at five volts, five thousand, fifty thousand, five hundred thousand, or five million. However, that fifteen watts continuous can give pulses in the effective rage of hundreds of watts or even megawatts -- if the initial voltage is converted to high voltage and stored in a capacitor and then released as a single pulse, if the duration of the pulse is short enough -- for those reading that don't have a clue. The primary circuit of a properly designed tesla coil will quite possibly put you in the morgue with only 15 watts if touched by bare skin for that very reason, if you have built the design properly that is.


Paul Andrulis