DeBunk This

[Zeitmaschine]

The Frequency agitates the chemicals inside the CFL lamps and so the lamps glow. Nothing more.

Then what supplies the induction motor with 50Hz grid frequency? Let me know. So far my best guess is that the (thin) hot wires connected to mains were removed by software.

[tinman]

This device was debunked about a year ago by a guy I subscribe to on youtube..  Another guy made the same thing using the same motors and, Electronicsnmore on youtube replicated it and, of course it did not work.  I will try to find his video and see if he figured out how the guy was faking it.  It was a while ago so it might take me some time. 

I think the light bulbs are self-powered and would light up if those leads were just clipped together.  This reminds me of the computer fan motor "free energy" devices made using batteries and reed switches.  Many folks made these and claimed they were real.

What the heck is wrong with people?

Bill

***EDIT***

Here is the video: https://www.youtube.com/watch?v=dpHDSzVysTY
In it, he talks about 3 other guys that made the same thing.

Hi Bill

That video didnt show how it was done,so we are still yet to work it out.

In the video i posted,that was quite a large incandescent bulb,with a large filament . Do you relly think he could have had a battery that could provide the needed power to drive that bulb like it did ,inside the bulb it self?.

I-we know it's a hoax,as shaded pole motors do not work as generators. You may get some very small signal across the coil when you spin them,but that is just residual magnetism in the steel laminated sections of the rotor--but even that is doubtful ,due to the fact that those laminated steel rotor core sections operate in an AC environment.

Brad

[tinman]

There is nothing in here. This is a high frequency jumping from the device to light up the lamp. you can do it with a commercial 10 watt Violet Ray device available for $40 (a Tesla coil of 10 watts) to light up another 5 watt CFL lamp placed near it. If the intensity of the coil is high like 600 watts Multiple wave oscillator then a large number of lamps placed between the two aerials over and above the 600 watts will glow. This is nothing but due to Frequency effect. I have checked if the lamp will provide a measurable voltage at its end and there is no voltage in such lamps as can be measured as DC or AC. The Frequency agitates the chemicals inside the CFL lamps and so the lamps glow. Nothing more.

The bulb in the video i posted is not a CFL,it is an incandescent bulb


Brad

[Pirate88179]

Hi Bill

That video didnt show how it was done,so we are still yet to work it out.

In the video i posted,that was quite a large incandescent bulb,with a large filament . Do you relly think he could have had a battery that could provide the needed power to drive that bulb like it did ,inside the bulb it self?.

I-we know it's a hoax,as shaded pole motors do not work as generators. You may get some very small signal across the coil when you spin them,but that is just residual magnetism in the steel laminated sections of the rotor--but even that is doubtful ,due to the fact that those laminated steel rotor core sections operate in an AC environment.

Brad

Brad:

Yes, sorry...it had been a while since I had watched his video and you are correct...he just debunked it but did not show how it could have been done.  I do not think it is a battery now but...I am suspicious of that paper on his table.  I wonder why that is there?

Bill

[Lidmotor]

The bulb in the video i posted is not a CFL,it is an incandescent bulb


Brad

That is one thing that has me puzzled also.  That is a pretty big incandescent and it is on bright.  Somehow these guys are getting AC into that contraption. Using a feed wire and then photo shopping it out later is a possibility but I don't think so ---and thin wires couldn't carry that kind of current.  An inductive linkup is a possibility but when the guys pick up the motors and move them around I don't think they would keep running like they do.  My idea of a synchronous motor type linkup is possible but that wouldn't account for a light bulb (like that) on bright.  It is a puzzle for sure but a few people have figured it out.  I have seen several replication videos on YouTube.  Perhaps it is being done in different ways?  It is a puzzle.  Brad you are very right that a shaded pole motor will not work as a generator---AC or DC.  One guy claims that the rotor has to be modified with a ring magnet then you would get the right effects. The thing would still never self run.

Lidmotor