Re: Self Looped Cap Dump Bedini Motor

[tinman]

In my opinion they release bits and pieces, and see if people will put in the work and to see how far researchers can go with it as it is released. In all honesty I see nothing wrong with making money off your research or discoveries during or after years of hard work in the field.

Believe me I was following all those guys Bedini, Bearden, Lindemann etc. It took me a long time to understand what these people were saying between the lines. Yeah they could have just said it outright on their first release of info, but they chose not to. Maybe it was great fun or great conversation to see who could extract the finer points in what they were saying and implement them. I don't know. It took me years to understand and grasp the concept, I have shown and or described here.

The biggest help I ever had was Steve Gillis, erfinder, the man was a smart dude. We conversed for a few months on Skype and he shared a lot with me about what John Bedini was presenting in the Ferris wheel and the zero force motor. Even though we spent many hours discussing and dissecting John's stuff, Steve was willing to share certain aspects that I have still not quite figured out yet, but I will in time, I am so close I can taste it!

Perhaps John may or may not have been the inventor of the arrangement of the Ferris wheel and or the zero force motor, I don't know but he did have connections with fellow's like John Cejeka who gave him access to mountains of information from other inventors inventions. That being said I do not know if the energy machine of Johns were original to him or if the magnetic arrangement has been passed down through the days of Tesla? But one thing is certain it is not taught in universities and the like.

To me this is the true monopole magnetic field, referring to the assemetrical wave form. I believe various inventors have used this arrangement in their machines motor / generators to supply feed back to the front end, to limit or remove all need for a power source for their machines.

Tinman maybe you release all you information or discoveries you make for free and don't expect a dime in return and that is very kind of you. But others may think differently and want to make something of off of their hard research. I don't fault them for it. I just buy it and consume it and get a few more tidbits to help me to work on my goal of free energy, which is very close to unity. I have made advancements and sharing info freely, but I may decide to sell some info or kits down the road if I ever reach my goal. No harm in that.

Dave Wing

There is a difference between adding word salad and voodoo to well know stuff, and selling it as some new discovery, and those that stray from the norm, and actually find something new, and share it free of charge.

So here is the story. After building my very first pulse motor, and having it actually run the very first time, i joined a forum.
From memory, i believe it was called TEEP. Now, not sure if it was you that mentioned comwarrior, or some one else a few days ago, but he was a moderator on that forum. After a few weeks messing around with the standard old ssg circuit, i started messing around with some new ideas. Now, when my pulse motor designs started to put comworriors to shame, he banned me from posting them, saying they were dangerous, and could start fires lol. Anyway, a lot of the members there started to complain on my behalf, and a lot of us ended up in a big shitfight with said comwarrior. Myself and another member (who also became a good friend) started up another forum-the IAEC (International Alternative Energy Center) Here is the links to my partners youtube channel. You will spend days watching his videos, and all the pulse motors he has built. He has built more pulse motors than all of us put together. (  https://www.youtube.com/@MisterCaribbeanRoots/videos )
Needless to say, over half of the members from TEEP came and joined our new forum.

This is what we did on that forum. We took pulse motors to another level.
Rather than make claims of my own, here is a member that did a replication of one of my pulse motor circuits.
https://www.youtube.com/watch?v=5HwUuPQn2W8&list=FLsLiBC2cL5GsZGLcj2rm-4w&index=87

I also did a lot of work on solid state circuits, and here is one that another replicated.
https://www.youtube.com/watch?v=hvf9Uo7UVx0&list=FLsLiBC2cL5GsZGLcj2rm-4w&index=31

I have been working on different designs and circuits for pulse motors, and many other things for over 20 years now.
And right at this moment, i have some here replicating my latest invention.
If you want to know how a waveform should look across a pulse motor coil, then look at the scope shot below.
That is the waveform that will get you to where you want to be, and you would have never seen a waveform from a pulse motor like the one below. I'm not sure if you know what you are looking at when looking at scope traces, but here it is anyway.
The CVR is 1 ohms, and the scope shot shows the rest of the story.

If you are spinning magnets or coils, then you will not get over the edge.
You need to think out of the box, and venture into the untried.


Brad

[SolarLab]

Hi Fellows - Dave Wing, Tinman, Anyone,

Excuse my ignorance w.r.t. these Pulsed Motors but I have to ask if these are designed to
create "Excess Energy" by "Self Running" while also "Charging Batteries."

It all sounds quite interesting but I could use a bit of an overview of the development
objectives and what the end results might yield (output capacity, etc. would be helpful).

The only thing I know about Bedini's devices is they apparently used pulses to rejuvenate
lead-acid batteries (I think one of my Stanley 12VDC Battery Chargers uses this concept).

Appreciate any help, links, explainations or details if it's not too much trouble.

My search is to find the best "Excess Energy" solution before time runs out! 

There are a few good options already on the table but just trying to "leave no stone unturned" in this pursuit. 

Thanks, seriously!  (And No, I'm not trying to steal your ideas or designs or anything.)

SL 

[tinman]

Hi Fellows - Dave Wing, Tinman, Anyone,

Excuse my ignorance w.r.t. these Pulsed Motors but I have to ask if these are designed to
create "Excess Energy" by "Self Running" while also "Charging Batteries."

It all sounds quite interesting but I could use a bit of an overview of the development
objectives and what the end results might yield (output capacity, etc. would be helpful).

The only thing I know about Bedini's devices is they apparently used pulses to rejuvenate
lead-acid batteries (I think one of my Stanley 12VDC Battery Chargers uses this concept).

Appreciate any help, links, explainations or details if it's not too much trouble.

My search is to find the best "Excess Energy" solution before time runs out! 

There are a few good options already on the table but just trying to "leave no stone unturned" in this pursuit. 

Thanks, seriously!  (And No, I'm not trying to steal your ideas or designs or anything.)

SL

The pulse motors as per bedini design will kill your battery after a while.
The voltage spikes are too high. The battery chargers with desulphation/rejuvenation mode, use around 20-30 volt pulses
to dissolve any remaining sulphate crystals on the plates.

[Dave Wing]

There is a difference between adding word salad and voodoo to well know stuff, and selling it as some new discovery, and those that stray from the norm, and actually find something new, and share it free of charge.

So here is the story. After building my very first pulse motor, and having it actually run the very first time, i joined a forum.
From memory, i believe it was called TEEP. Now, not sure if it was you that mentioned comwarrior, or some one else a few days ago, but he was a moderator on that forum. After a few weeks messing around with the standard old ssg circuit, i started messing around with some new ideas. Now, when my pulse motor designs started to put comworriors to shame, he banned me from posting them, saying they were dangerous, and could start fires lol. Anyway, a lot of the members there started to complain on my behalf, and a lot of us ended up in a big shitfight with said comwarrior. Myself and another member (who also became a good friend) started up another forum-the IAEC (International Alternative Energy Center) Here is the links to my partners youtube channel. You will spend days watching his videos, and all the pulse motors he has built. He has built more pulse motors than all of us put together. (  https://www.youtube.com/@MisterCaribbeanRoots/videos )
Needless to say, over half of the members from TEEP came and joined our new forum.

This is what we did on that forum. We took pulse motors to another level.
Rather than make claims of my own, here is a member that did a replication of one of my pulse motor circuits.
https://www.youtube.com/watch?v=5HwUuPQn2W8&list=FLsLiBC2cL5GsZGLcj2rm-4w&index=87

I also did a lot of work on solid state circuits, and here is one that another replicated.
https://www.youtube.com/watch?v=hvf9Uo7UVx0&list=FLsLiBC2cL5GsZGLcj2rm-4w&index=31

I have been working on different designs and circuits for pulse motors, and many other things for over 20 years now.
And right at this moment, i have some here replicating my latest invention.
If you want to know how a waveform should look across a pulse motor coil, then look at the scope shot below.
That is the waveform that will get you to where you want to be, and you would have never seen a waveform from a pulse motor like the one below. I'm not sure if you know what you are looking at when looking at scope traces, but here it is anyway.
The CVR is 1 ohms, and the scope shot shows the rest of the story.

If you are spinning magnets or coils, then you will not get over the edge.
You need to think out of the box, and venture into the untried.


Brad

I have seen all those YouTube channels over the years, however I don't think I ever watched this one particular video https://youtu.be/hvf9Uo7UVx0?si=ffgltO6zmKJ7FGt3 it is a nice piece of work Brad, very interesting. How far did you get with it?

As far as the Bedini circuit sending the coil collapse to the secondary bank and killing batteries, I don't believe the pulses cause any harm to batteries, as long as they are not mechanically damaged and or dried out. If you choose to use batteries you should use wet cell batteries that are in good condition, new batteries preferably.

In this research field there is many avenues to travel down, many directions of research and multiple ways to get results. I am not trying to rain on anyone's parade or trying steal their glory, in fact I value others research and feel there is room for multiple paths of discovery to reach the common goal. I don't discount what others say, if it is the truth then I will follow and make adjustments to get to where I need to be.That is how I have gotten this far in life.

[Dave Wing]

Hi Fellows - Dave Wing, Tinman, Anyone,

Excuse my ignorance w.r.t. these Pulsed Motors but I have to ask if these are designed to
create "Excess Energy" by "Self Running" while also "Charging Batteries."

It all sounds quite interesting but I could use a bit of an overview of the development
objectives and what the end results might yield (output capacity, etc. would be helpful).

The only thing I know about Bedini's devices is they apparently used pulses to rejuvenate
lead-acid batteries (I think one of my Stanley 12VDC Battery Chargers uses this concept).

Appreciate any help, links, explainations or details if it's not too much trouble.

My search is to find the best "Excess Energy" solution before time runs out! 

There are a few good options already on the table but just trying to "leave no stone unturned" in this pursuit. 

Thanks, seriously!  (And No, I'm not trying to steal your ideas or designs or anything.)

SL

I cannot speak for anyone but myself, it has been a long process of learning, spinning your wheels and then learning, I have been researching free energy and purchased Energy From The Vacuum by Thomas Bearden in August 2005. I was on the Bedini Yahoo groups, prior to the forums you see now. One thing I discovered is it takes an extreme amount to work to find those needles in the hay stack. Those needles are hidden under piles of information, misinformation, disinformation, you name it. I am so surprised to this day that the free energy community does not have an open source path to construct a basic free energy machine that produces mechanical energy by self powering itself. It's shameful, but understandable why we do not have build instructions of such a device in the public domain that anyone can build, by looking it up on line.

Enough said...

Now I believe the whole point of the SG is not to charge a secondary battery bank, the purpose of the SG is to try and teach the experimenter to advance his understanding of what the machine is doing and make the necessary changes to maximize the recovery section and send that as feed back to the primary circuit so the machine can power itself. To me that is how experimenters should be thinking ((( feed back))) it can be done with an isolated winding. Remember the SG with the inductive trigger winding is a 1:1 transformer as shown by John. Trigger the SG with external trigger mechanism, small inductive coil, hall switch, opto, etc. and make sure you have a separate winding for transformer action. People need to be thinking of feed back loops, Energy can neither be created or destroyed, but can it be recycled as feed back to the front end powering the machine! That is one aspect and or area that needs to be strongly focused on by the free energy community.

Dave Wing