Steven Marks ring of power

[gast]

Bushwacker, your attitude is very praise worth and I share it with you.
Kindly excuse that I do not more engross my answer into this topic, but it is not easy for me to formulate all this in english.

So back to some tecnical things. Can you tell me what kind of electronical tools do you use for developing the HOPE generator (osszilloscope, waveform generator e.t.c)?

Regards Gast

[BushWacker]

Hello Gast,

    Do not worry about your English, you do very well and I cannot speak any German myself so you have one up on me there. Concerning the tools that I use to develop the HOPE, I now have absolutely no tools at all. Our home was hit by some type of EMP energy recently which blew out our big screen TV, our water distiller, several light bulbs, and even my multimeter which was switched on at the time. The voltage on my multimeter went up to about 600 volts before registering OL on the digital readout and burning up. I am not well liked by the current administration in our country and I do not believe this was accidental. We are fast becomming a police state, and my own personal Homeland Security Reconisance Expert has been assigned to keep an eye on my activities because of some of the work I am doing. My e-mail is being censored daily and some of my contact's are beginning to experience the same type of activities lately. However, I have already made quite a few interesting discoveries which have attracted the interest of private investor's and hope to be able to obtain some really good tools soon. I wish I could say more at this time but my situation is such that I cannot afford to say too much right now. I have been staying up through the night for the last couple days trying to hurry and finish the HOPE Instructions Manual and expect to be done within the next couple of days rather than the weeks that I had figured on it taking. The interest has been great however, and many others are also wanting to have the information as soon as possible. Since there does seem to be such interest I feel that I should strike while the iron is hot as the saying goes, and get this out as quickly as possible before everyone moves on to the next thing. Btw, I wrote to the engineer at the company that sold me the core for my HOPE unit, and told him about the successful results. He responded telling me that it was basically impossible to do what I am doing with the particular core material that they sold me, lol. I guess I should send him the short video from a couple months ago eh? I really need to make a new video not that I have increased the output potential by several factors in the last couple of months, but all I have is a cheap old web-cam with poor quality video. I will see if the engineer's who are scheduled to be coming in a couple weeks can provide a good video recorder so that I can update the old one. Thank you for your interest Gast, and stay tuned. I should have these Instructions out to everyone very soon now.


Best Regards,

J.D.Fauble
BushWacker

[gast]

Hello BushWacker,

> Concerning the tools that I use to develop the HOPE, I now have absolutely no
> tools at all. Our home was hit by some type of EMP energy recently which blew out our big screen TV,
> our water distiller, several light bulbs, and even my multimeter which was switched on at the time.
> The voltage on my multimeter went up to about 600 volts before registering OL on the digital readout
> and burning up.

Uh! This sounds like "X-files" on TV. =:-O

> I am not well liked by the current administration in our country and I do not believe
> this was accidental. We are fast becomming a police state, and my own personal Homeland Security
> Reconisance Expert has been assigned to keep an eye on my activities because of some of the work I
> am doing.
> My e-mail is being censored daily and some of my contact's are beginning to experience the
> same type of activities lately.

*shock* Is this really true? Wat are you doing in your real life?
What you are telling is absolutley unimaginable for me. What do you think... was it was a good idea
to sign my posts with a pseudonym instead of my realname? ;-)

But, hey, I think it is a scandal to burn out your expensive equipment and I take pity on you.

So, if I understand right you used only a digital multimeter for developing the HOPE (before
the EMP hit your house)?

> However, I have already made quite a few interesting discoveries which
> have attracted the interest of private investor's and hope to be able to obtain some really good tools
> soon. I wish I could say more at this time but my situation is such that I cannot afford to say too
> much right now.

I think, I get your point.

Please allow me a little private question. Are you trained in electronics?

> I have been staying up through the night for the last couple days trying to hurry and
> finish the HOPE Instructions Manual and expect to be done within the next couple of days rather than
> the weeks that I had figured on it taking.

I'll keep my fingers crossed and will wait until you have finished the Instructions Manual.

> Btw, I wrote to the engineer at the company that sold me the core for my HOPE unit, and told him
> about the successful results. He responded telling me that it was basically impossible to do what
> I am doing with the particular core material that they sold me, lol.
> I guess I should send him the short video from a couple months ago eh?

:-D Absolute! Send him your video. He should look surprised.

> I really need to make a new video not that I have increased the output potential by several
> factors in the last couple of months, but all I have is a cheap old web-cam with poor quality video.
> I will see if the engineer's who are scheduled to be coming in a couple weeks can provide a good
> video recorder so that I can update the old one.

This would be fine.
But if you have the time, would you capture a new clip with your webcam showing the running HOPE
device? And would you move the webcam during capturing around the HOPE device to see the running
device from different angles?


Regards, Gast

[gast]

Today I tried to build a simple version of MEG - only to test whether the magnet  in the middle of the 2 U-cores have any effekt to the outputsignal.

I used the core from an old transformer. Fortunately it is a kind of U-shaped  core. I built only one half of the MEG, so I have only one input coil and one  output coil. The two coils where taken from another old transformer with a ratio of 220:12.
I took the coil with more turns (220V) as input coil and the coil with less  turns as output coil.

The magnets in the middle of the core are neodym-magnets. Unfortunately I own only this kind of magnets.

The input coil was supplied by an external stereo-amplifier and the tone was  generated by an tonegenerator running on my pc.

I found out that the 5800 Hz(*) is the frequence with the highest output-voltage. But the magnets in the middle of the core have no effekt. I tried some smaller Neodym magnets, but I got the same result.
Maybe the magnets are to powerfull or the input power was to low. The input voltage was 19 Volts, measured with an digital voltagemeter in AC mode - maybe this is not the exact value because of the 5800 Hz instead of 50 Hz the voltagemeter was build for.

(*) = I tested another coil/core-configuration with an round "I-core" (a stick) and there I find a different resonance frequency for the highest output voltage [10 Khz]. So it is proof that the amplifier does not have a non linear output voltage with an high/max. on 5800 Hz.)

[BushWacker]

Hi Gast,

   The fact that you got any voltage reading from that set-up is remarkable to me considering that the core seems to be nothing more than layered steel. Also, you are probably correct about the likely discrepancy in your readings due to the much higher frequency input which the multimeter is not made for. Anyway, I am sending the ruff draft of the instruction manual for building the HOPE to Stefan tonight. I'm not sure how to go about posting this file on this forum so I will leave that up to the master of media here, lol. I wanted to be able to have an editor look over the instructions before posting them, but he is the only one of my new buisness partners who hasn't disappeared from the face of the earth yet, and the MIB have been parked outside his home for the last couple of days now. This tells me that it may not be long before I am payed a visit as well. However I have taken up a different strategy and believe in staying in the light so that they will have to expose themselves in order to get to me. Our first partner was very young and did not take us seriously enough. He thought that he would be safe by staying in the shadows. This is real life here these days my friend. Of course we have been planning much more interesting things than the HOPE, but the HOPE is something that people can build at home to see and prove that there are other means of generating electricity. I will be sending the manual immediately after posting this message, so if you don't know where to find it just ask Stefan because it will be up to him as far as how and where to make it available okay? I appoligize for any difficulties in understanding my directions beforehand, and if I and my remaining partner are not escorted away beforehand I will try and have him edit it to professional standards. Good fortune, and God be with you my friend.


Best Regards,

Jim