Helmust Goebkes magnet motor

[BEP]

@RunningBare

Good point but not completely correct.
Simple experiment:

Stick a fairly thick piece of steel sheet in a vise.
Put a magnet on opposite sides so the magnets would be in repulsion if the sheet was not there.
Slide both magnets together toward an edge of the sheet and past the edge.
Watch what happens.

The thickness of the sheet needs to be thick enough so the magnets will not repel each other when on opposite sides.

Knuckle-Whackers keep quiet unless you try this and don't see.

[bastonia]

In regards to Magnets and Iron,  there are some very interesting properties going on.  These properties are very much worth investigating.

Here is an example:  http://www.youtube.com/watch?v=y7IVWkRvVKk

[pese]

[
.

[pese]

In regards to Magnets and Iron,  there are some very interesting properties going on.  These properties are very much worth investigating.

Here is an example:  http://www.youtube.com/watch?v=y7IVWkRvVKk

Hi,

this is very simple to understand.

the iro will come
with N / N  or S / S connectet magnets
STRONGER with polarity (down) also  N Polarity  or South Polaraity.

If  N / S.are connected on top. (om both sides)
the "Iron" COMES IN THE (middle)  "NEUTRALE  ZONE"
and have so also NEUTRAL magnetism  down !!
thats fact , and all.
no mystery

Pese

pese.cjb.net  (link collection) german and english.

http://pesetrier.stormloader.com/index0.html (german)

[gyulasun]

In regards to Magnets and Iron,  there are some very interesting properties going on.  These properties are very much worth investigating.

Here is an example:  http://www.youtube.com/watch?v=y7IVWkRvVKk

Hi,

Although Pese explained the principle, you can see an experiment on the LaFonte setup shown in your video link with flux measurements by Naudin here: http://jnaudin.free.fr/html/mep1.htm

rgds,  Gyula