Gravity Magnetic Motor

[itsblockdog]

Thank you therealrasta. You've been most helpful. Kind regards, Ronnie

Your most likely going to have to strip the plating off... Most important factor when bonding is how clean the surface of the magnet and what your bonding it to is.. Such as body oils, dust, etc..  Check this link.. I think it may help you.

http://www.mceproducts.com/knowledge-base/article/article-dtl.asp?id=67

[therealrasta]

Thank you therealrasta. You've been most helpful. Kind regards, Ronnie

Glad to help when I can.. Hope your build continues and successfully too.

[itsblockdog]

Thank you Omega. You've been a very helpful and attentive friend. Considering other devices of efforts (I think?) the "wobble" may be a common factor to accept or at least give regard that it may need be present in the list of traits present within certain designs. The most baffling thing to me has become the repeat of personal history. AB is a good and VERY encouraging trust. I simply can NOT force this endeavor to evolve quicker than the very nature of it's existance. My personal emotions need descipline regarding patience. You haven't "missed" anything...I don't think? Clanzers post inspired me to "motivate." His presentation displayed such logic, I actually RAN to collect stuff. His display revealed search for weight, gravity, magnetic presence and a method to search for timing; all in one. God knows when, why, where....everything about what each of our individual inspiration purposes are to propose. Isn't one of the symbols for God a circle with a dot in the center? Well, here's the wheel. Clumbsy it putters. The girl is gone. The place looks like total chaos. It's moral honor not to breech trusts and post sensitive matters. Thank you further for your kind manner in every respect. Kind regards, Ronnie

itsblockdog,

I replied to your message, please check the inbox here.

I hope the replication is going nicely. Some pics or vids would be nice. (From yourself or AB)

Meanwhile I guess Clanzer has given up on this wheel, because I saw his bike wheel dismantled and re-used for that mondersek (sp?) wheel. Clanzer what happened ?

Anyway, he uploaded this gem  recently -
http://uk.youtube.com/watch?v=xuZcHVT5YRs

I always thought that this uses the little vibrations of the hand (as shown in original video by the inventor) to get it spinning. And no one had shown it going with a fixed stator (i.e. not holding it in one's hand).
This is baffling and I wonder why everyone is silent over this. Did I miss something

[AnandAadhar]

From my studying the IPMM http://www.overunity.com/index.php/topic,4449.new.html#new and the Hamel generator http://www.overunity.com/index.php/topic,5011.msg114847.html#msg114847 I have arrived at the same conclusion: a magnet motor must engage a second force like gravity. So a gravito-magnetic Stirling type of engine could very well work. If it does we have simple man's Finsrud. A, by me, sought after schoolboy design that is easily replicable. Finsrud was the first one to successfully combine gravity and magnetism in a selfrunning device. Problem with him is the difficulty to replicate his art work. What he has is a chaos pendulum the control over which is difficult. From my Hamel replication I saw the possibility of harnessing an alternation of OU magnet pulsing by means of a Sterling design engaging gravity as modelled above. Thanks for that computer animation, very nice.

The magnet setup is the point: for a Sterling engine you have to build a kind of connected magnetic pistons that alternately either suck or push the wheel by means of a gate. The principle has been described in 1979 by Bedini as a possible drive for a magnet motor at this page: http://keelynet.com/energy/bedgate.htm.  So, studying this gate, is what is of importance to have the so-called 90 degrees rule respected (http://www.fdp.nu/free_energy.asp?book=90). Without it you have no effective gate, but just a magnetic resistor. This would mean that two ringmagnets won't work because their polarities are in the same direction and not at angle. You have to build a gate as Bedini described and then push a magnet toward it to get it attracted. It attracts, according Bedini, four times as much as it repels, before the gate that is. In his saying that behind the gate that effect is maintained, I think he is wrong. Behind the gate it is the obverse namely, the resistance there to escape is four times as big as the push. That's why circular setups of gates don't work. The field around the gate balances the space energy of the magnet field. But if one with a Stirling engine set-up pulls the ringmagnet away from the Bedini gate before it has passed it then would one have the space-energy drive to make this machine a working ether machine.

If it works it proves a new law of nature, or better stated a corollary to the thermodynamic law of the preservation of energy: the preservation of field energy. This is what Bearden proved with his MEG patent.  One could also call it the law of Bearden in physical terms or the law of Vishnu in spiritual terms. Vishnu is the preserver and the integrity of the ether force in three different aspects: the local aspect of a magnetic wobble (curved space ether or tertiary ether: cyclic time, magnetism), the universal aspect of linear gravitation towards a black hole (universal space of negative inward going time; linear centipetal force) and the cosmic aspect of timespace expansion: the primal ether from which evertything started (linear centifugal).  The vedic terms for it are: kshiro (the local) garbo (the universal) and karano (the causal and primal drive).http://bhagavata.org/glossary/v.html#V%20i%20s%20h%20n%20u So what we are building here is a vishnu-yantra, the Sanskrit word for an ether machine that would demonstrate this (new) law of conservation of field energy.

Thus building the device, the flywheel would represent the universal garbo aspect of Vishnu, the magnetic Bedini gate pistons at both sides of the wheel to give ot a continuous push or pull would represent the linear amplification from the causal ether (the karano-aspect) and the eventual connection underneath the pistons creating a wobble that drives a rotor wheel for energy production would then figure for the local aspect (the kshiro). For a classroom demonstration of magnetic OU this latter aspect may be ommitted possibly. Thus would a gravito-magnetic sterling, let's say a GMS-device, be a perfect demonstration of the universal, cosmic and local aspects of the classical aether. There is even a vedic mantra to meditate and keep the ego and the mind under control with constructing and propagating this machine: jagann?tha sw?mi, nayana patha g?m?, bhava tume, meaning "O lord Vishnu, o Lord of the universe, please make Yourselves visible before our eyes!".http://bhagavata.org/music/text/jagannath.html In the Bhagavad G?t? (4.7 http://bhagavata.org/gita/chapter4.html#text%207) He promises to descend whenever that is really needed. And I think that at present is the case with our troubled energy politics on the planet. So we have the blessings from that department too! If our inventive and greedy ego's can't cope with the load of such a worldwide cultural reform, which is something very understandable, then let's give it to the tradition of respecting Vishnu in this way.Thus properly in sum giving credit to Finsrud, Bedini, Hamel, Bearden and even Lord Vishnu and His many manifestations, will the OMEGA ego of Ronny finding Bedini's principle by accident and such notions be appeased. It we accomplish something like this, and I do pray that we will have something replicable, is it because of all of these predecessors of science, invention and spirituality inspired us to make it this way and thus need they to be given credit. Only this kind of open source can make it a true success as well scientifically as spiritually leading to the happiness of us all. That is what I am after.

AnandAadhar

[AnandAadhar]

Sorry your name was Ronnie, not? Do you have a webpage of your own or something?