New inventor of a Watercar (Bike)

[hartiberlin]

Here is a new video of Mark Joyner visiting Steve Ryan and doing tests:

http://www.youtube.com/watch?v=cfhacTEcZhE

Also here are quite a few interesting new videos:

http://www.biosfuel.org/videos.html

Here is a discussion forum there:

http://www.markjoyner.name/logs/archives/news/video_man_runs_normal_car_on_water_based_fuel.php


Somebody in the youtube discussion added:

DJCatylist wrote :
"the mixture of metals is coloydal silver, and stainless steel flakes, its pretty common knowledge... "

So it seems these 2 metals just generate Hydrogen from the water and this hydrogen is
then stored under pressure into the water the same as CO2 is stored in water and
gives "selter water", where itcan get out again by heating it or shaking it
( what would be done in a caraburator or fuel injector...)

[hartiberlin]

I would be very much interested into the urine battery and
would like to ask, if anybody knows the 2 metals electrodes Steve Ryan is
using in his urine battery.

In one video he had said, the one mesh like plate is Titanium,
when I remember right, but I can?t find this video anymore.
The other thicker plate what could this be ?
Looks a bit like cement to me,but this would not be conductive...

Would be really interesting to know, if the metals
really don?t use up as it would normally be in a galvanic battery cell.

As he can generate about 1.5 Volts and 0.18 amps short circuit current per cell this
is quite nice...

So what could these electrodes be like ?

Regards, Stefan.

[buckeyept49]

WOW! try this I did. take a hydro gen with a pressure gage, attached a shut off valve, connect between #1 gen and #1 bubbler. I had to wire my tubbing on, it blew off with preassure. close valve till 10 lb, then open valve a little, my pressure went to 15+ lb before i could get valve open. bubbles like crazy with that back pressure.
NOW take your tubing from your #1 bubbler connect to #2 hydro gen with a check valve. now connect #2 hydro gen with shut off valve to #2 bubbler. close valve till you reach 10+lb  pressure. open valve a little.M.G. all the bubbles. ONE MORE TIME
take tubing from #2 bubbler with a check valve, connect to #3 hydro gen, connect with a shutoff valve to your#3 bubbler, bring pressure to 10lb open shutoff valve a little on #3 hydro gen, stand back what do you see? BAM bubbler will not hold all bubbles.      do you think with the back pressure some hydrogen was dissolved into the water creating a violent electrolysis at gen #3 which the #3 bubbler could not handle?

[hartiberlin]

This is the latest news from Steve Ryan, I just received it:


Good Afternoon All,



As part of the Greenfleet Class of the Panasonic World Solar Challenge 2007 New Zealand company Bios Fuel Corporation has demonstrated what many believe to be the impossible - running a virtually unmodified diesel engine on their H2W+ fuel blend comprising of 40% Water and 60% Waste Mineral oil for 3000 kilometres across the Australian Desert.



Please find attached a press release with full information. Also please take the time to visit our website www.biosfuelsolarchallenge.com to view some fantastic imagery and full details on the challenge.



For those of you located in NZ there will be a feature on 60 Minutes on TV3 on the NZ entrants into the challenge, also we will place the segment online tomorrow midday for everyone to view.





Thanks and Kind Regards: The Bios Fuel Team



If you do not wish to receive any further email updates from Bios Fuel Ltd please respond to info@biosfuelsolarchallenge.com ?Remove from Database?

[helmut]

WOW! try this I did. take a hydro gen with a pressure gage, attached a shut off valve, connect between #1 gen and #1 bubbler. I had to wire my tubbing on, it blew off with preassure. close valve till 10 lb, then open valve a little, my pressure went to 15+ lb before i could get valve open. bubbles like crazy with that back pressure.
NOW take your tubing from your #1 bubbler connect to #2 hydro gen with a check valve. now connect #2 hydro gen with shut off valve to #2 bubbler. close valve till you reach 10+lb  pressure. open valve a little.M.G. all the bubbles. ONE MORE TIME
take tubing from #2 bubbler with a check valve, connect to #3 hydro gen, connect with a shutoff valve to your#3 bubbler, bring pressure to 10lb open shutoff valve a little on #3 hydro gen, stand back what do you see? BAM bubbler will not hold all bubbles.      do you think with the back pressure some hydrogen was dissolved into the water creating a violent electrolysis at gen #3 which the #3 bubbler could not handle?

Hi
Can you provide a sketch according to this prossedure?
helmut