Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


Donald Smith Device self looping no cap no batteries bright Lights !

Started by gadgetmall, November 09, 2012, 06:22:34 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

Print
Go Down Pages 1 ... 4 5 6 7 8 ... 12
User actions

Bruce_TPU

#25
November 11, 2012, 09:42:39 AM
Quote from: mrclean on November 11, 2012, 02:09:00 AM
hi everyone, i am not using any tricks, but im having a hard time reproducing this myself, so i hope not to cause too much frustration, but here is how i have it wired...
http://img802.imageshack.us/img802/1874/imagedmb.jpg
correct that it needs the 9v in FG, or nothing is telling the transistor to do anything. and freq being critical here i believe.
but the signal gen cannot run the system alone with out a battery pulse.
like i said tho, if it wont work dont spend to much time on it.
however the Bitoroid i feel is very much the right direction
Interesting set up.  From the video I suspected the negative only was connected to the other battery.  And posted such. 
http://www.overunity.com/12716/probality-of-god/msg343603/#msg343603

Hi MrClean,
In your circuit, you have the word "theoretical self loop",  is this because you are not yet convinced it is so? 
Very good work so far.  But figuring out why it is working and being able to replicate it is every bit as important as having it work, in my humble opinion.  So please keep at it!   ;)

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

poynt99

#26
November 11, 2012, 11:57:21 AM
Kurt.

Your big 1F capacitor is connected according to your diagram. Aren't you saying in the video that it is disconnected?

Also, what is the source for the 9V which is supplying the driver circuit? You didn't show this in your diagram.

ETA: What is that "parallel free wire" used for?
ETA2: Further annotated the diagram.
question everything, double check the facts, THEN decide your path...

Simple Cheap Low Power Oscillators V2.0
http://www.overunity.com/index.php?action=downloads;sa=view;down=248
Towards Realizing the TPU V1.4: http://www.overunity.com/index.php?action=downloads;sa=view;down=217
Capacitor Energy Transfer Experiments V1.0: http://www.overunity.com/index.php?action=downloads;sa=view;down=209

poynt99

#27
November 11, 2012, 12:47:15 PM
The way I see it, Kurt's 9V source is either a 9V battery, or he is regulating the 12V input from the 12V battery/1F capacitor down to 9V.

By "isolated" I suspect he means that the 9V supply is not connected to the transistor collectors.
question everything, double check the facts, THEN decide your path...

Simple Cheap Low Power Oscillators V2.0
http://www.overunity.com/index.php?action=downloads;sa=view;down=248
Towards Realizing the TPU V1.4: http://www.overunity.com/index.php?action=downloads;sa=view;down=217
Capacitor Energy Transfer Experiments V1.0: http://www.overunity.com/index.php?action=downloads;sa=view;down=209

TinselKoala

#28
November 11, 2012, 01:32:26 PM
Of course it won't work without the 9v supply to the oscillator portion. But.... will it work without the One Farad, 12 volt capacitor?

mrclean

#29
November 11, 2012, 10:44:25 PM
Quote from: poynt99 on November 11, 2012, 12:47:15 PM
The way I see it, Kurt's 9V source is either a 9V battery, or he is regulating the 12V input from the 12V battery/1F capacitor down to 9V.

By "isolated" I suspect he means that the 9V supply is not connected to the transistor collectors.


correct, the 9v does not run collectors, but despite the interesting results, im concluding the results to be an anomaly, i cant guarantee that everyone will see these results, and im not able to reproduce it all the time
Print
Go Up Pages 1 ... 4 5 6 7 8 ... 12
User actions