Exploring the Inductive Resistor Heater

[MileHigh]

There is a recent Gmeast quote that I find kind of funny:

The waveform put out by the Keppe motor would handily act as the controlling signal for an Ainslie Heater. So there's a potential for a SUPER efficient heater/fan system product.

For starters a Keppe motor if I recall is just a plain old boring dumb pulse motor hooked up to a fan.  So how the "output waveform" could make for a "controlling signal" for an Ainslie heater is beyond me.

As a sidelight, the fan itself is quite a creation.  They take a regular fan propeller and glue wood veneer to the fan blades so you can make yourself feel good about spending $250 for a "natural" electric fan.

Going back to Gmeast's comments, what pray tell is a "SUPER efficient heater/fan?"   What is THAT?  Last time I looked you could buy ANY space heater that uses ANY fan and it will be 100% efficient at producing heat.

Like wow man!  You can go to the local Big Box store and get a HEATER THAT IS 100% EFFICIENT.  Call Sterling up Gmeast and tell him the news!  He will get all excited and write an article about it.

And it goes without saying that TK, Poynt, and PW are highly qualified individuals with tons of knowledge and experience.  So when Gmeast calls them all nasty names and says they are stupid he is just talking crap like some angry man with no better place to dissipate his frustration.  It's a spectacle where almost everybody that reads his rants against these good knowledgeable people knows that they are full of crap.  It's just a bunch of mendacious ugly nasty negativity with no redeeming qualities except perhaps for Gmeast himself.  Meds might be a better alternative or perhaps get a Nerf bat and flail away at the walls, floor and ceiling until you are completely exhausted.

MileHigh

[gmeast]

Resurrect a thread that has been dead since mid May, just to troll and stalk? And to complain about the site owner? Amazing, but true to form.

Prove it by giving a link to where I said "it's not work at all".

Meanwhile, I can prove that YOU say some pretty wild things, GMeast.

You want me to stay out of "your" threads, fine .... then don't mention me at all, especially not with one of your baseless distortions.

And, in case you haven't noticed.... I'm not melting down at all. In fact, it's rather the other way around, isn't it. You and your patron saint have fallen out, she produced the most hum-dinger of a "demonstration" imaginable where she soundly refuted herself much better than I ever could do.... and everything I ever said about her circuit is now known to be true. And the demo has given me even more material to illustrate just how wrong Ainslie and Donovan Martin really are, and how mendacious and devious they are. You can hear Ainslie melting down live on cellphone, just by clicking a few links, and you can see her own disproofs of her claims, in spite of her trying to withhold the screen images, on "my" thread having to do with her June 29 demo. Yet I am perfectly calm.... and perfectly correct.
That infuriates you, doesn't it. And it makes me LOL.

Your response shows your colors. Your response also shows that you are indeed melting down. " ... I am perfectly calm... and perfectly correct."  + "I am, I am, I am."   It does not infuriate me, it makes me laugh.


Thank you.

[gmeast]

There is a recent Gmeast quote that I find kind of funny:

For starters a Keppe motor if I recall is just a plain old boring dumb pulse motor hooked up to a fan.  So how the "output waveform" could make for a "controlling signal" for an Ainslie heater is beyond me.

As a sidelight, the fan itself is quite a creation.  They take a regular fan propeller and glue wood veneer to the fan blades so you can make yourself feel good about spending $250 for a "natural" electric fan.

Going back to Gmeast's comments, what pray tell is a "SUPER efficient heater/fan?"   What is THAT?  Last time I looked you could buy ANY space heater that uses ANY fan and it will be 100% efficient at producing heat.

Like wow man!  You can go to the local Big Box store and get a HEATER THAT IS 100% EFFICIENT.  Call Sterling up Gmeast and tell him the news!  He will get all excited and write an article about it.

And it goes without saying that TK, Poynt, and PW are highly qualified individuals with tons of knowledge and experience.  So when Gmeast calls them all nasty names and says they are stupid he is just talking crap like some angry man with no better place to dissipate his frustration.  It's a spectacle where almost everybody that reads his rants against these good knowledgeable people knows that they are full of crap.  It's just a bunch of mendacious ugly nasty negativity with no redeeming qualities except perhaps for Gmeast himself.  Meds might be a better alternative or perhaps get a Nerf bat and flail away at the walls, floor and ceiling until you are completely exhausted.

MileHigh

OOPS! I was wrong .... it's the Gang Of 4. What ... are you a shrink or something? I'm not frustrated at all, in fact I have gotten great joy watching the responses. BTW ... talk about calling nasty names, I suppose you condoned the filth that TK spewed in his rhetoric about Ainslie ... not that I care now.  At the time, that was OK though ... right?  Double standard. Why am I not surprised by that.

[MileHigh]

Gmeast:

I don't condone the nasty name calling on any side.  But I made a conscious decision to not involve myself beyond a certain limited point in this affair because this is just history reviving itself.

I am just interested in the truth coming out.  The truth is that a self-described old lady that saw some oscillations on a scope display due to measurement error and got all excited for nothing.  The whole thing is completely meaningless when you look at the big picture.  However, there are some important principals at stake that are worth defending if you choose to go there.  Once this nonsense reaches it's proper conclusion Rosemary will be spent and the whole thing will quickly be forgotten.

Going back to the trash talk, you step it up a notch such that it is extra ugly and corrosive and at the same time just more silly untrue nonsense waiting to go into the memory shredding machine.

This will all be forgotten before too long.  The academics will never "get engaged."

MileHigh

[gmeast]

Gmeast:

I don't condone the nasty name calling on any side.  But I made a conscious decision to not involve myself beyond a certain limited point in this affair because this is just history reviving itself.

I am just interested in the truth coming out.  The truth is that a self-described old lady that saw some oscillations on a scope display due to measurement error and got all excited for nothing.  The whole thing is completely meaningless when you look at the big picture.  However, there are some important principals at stake that are worth defending if you choose to go there.  Once this nonsense reaches it's proper conclusion Rosemary will be spent and the whole thing will quickly be forgotten.

Going back to the trash talk, you step it up a notch such that it is extra ugly and corrosive and at the same time just more silly untrue nonsense waiting to go into the memory shredding machine.

This will all be forgotten before too long.  The academics will never "get engaged."

MileHigh

I don't care about Ainslie's stuff, her oscillations, 'the academics' or anything else for that matter. I care about the variant I built, tested and my attempt to post my results here ...... PERIOD ... and the right to do that without being attacked by "      " and "     " and "     " and you because I have a variant of Ainslie's heater. I didn't mention the Gang Of 3's names (or yours) in this reply because "           " said he'd stay out of this thread if I don't mention his name. And that's fine ... he's irrelevant to my work and irrelevant to most everything else honest experimenters are doing.


Well Ainslie HASN'T been 'forgotten' for more than 10 years, so don't think she's going anywhere soon ... and as I said, "I don't care".  I've conducted dozens of identical tests who's results justify the further exploration of a heater using an element possessing Inductive and Resistive characteristics.  I have no working theory, but I have consistent test results which I have attempted to share.


Stay out of this thread. I don't need your feedback or input. You have already made up your minds about many OU projects that people have attempted to share in good faith and conscience in these forums. Someone needs to tell you that NO ONE HAS ASSIGNED YOU GUYS TO BE THE WORLD'S FILTER for technologies that have potential to benefit mankind ... though it seems you have self-appointed yourselves to that task. 


Thank you