Partnered Output Coils - Free Energy

[synchro1]

Ok, so you too can melt copper.
But.... back to the point.
You did not use bucking coils  because they can't work can they? The output will be nil won't it?


So let's try again........


Now we have scope shots....


https://www.youtube.com/watch?v=ZGSz_a3tTrk

Quote from Woopyjump:

"I am puzzled by the (amount of) lighting I got for 0.6 watt input!"

These are really incredible measurements! Woopyjump says the bulb's shining brighter than it does when plugged into a wall socket. It looks brilliant at full intensity in the video. Assuming it's shining at it's fully rated 35 Watts of intensity in Lumens, a light box of photo-voltaic cells acting at 30% efficiency should generate 10.5 watts of electricity. That translates into a whopping COP of 17.5>OU! This could easily self loop and run itself with plenty of exccess power left over. Powerful enough to replace nuclear fission plants! What's going on here?

Woopyjump has four Mosfets in tandem. Perhaps they run his operating frequency up into the Terahertz?

[John.K1]

John.K1:

Your train of thought is definitely on the wrong track here.  Things are not nearly as tricky and mysterious and mystical as you are suggesting.  You just _think_ that you saw unusual things.  How a transformer works, and by extension how a bucking coils transformer works should not surprise you.  So I encourage you to do the background research.

There are probably about five or six concepts and related variables and parameters associated with a transformer that will cover 99.9% of all that you can possibly observe on your bench when you play with a transformer.  Master those concepts and understand the related variables and parameters and you are done.  Repeat the same tests that you make reference to above and you would realize how plain and ordinary your observations really were.

If you have this kind of attitude when it comes to the stuff you see around here with respect to electronic circuits, then you will likely lead yourself down many incorrect garden paths.

MileHigh

Well MH,  The thing is I am not effected by standard electronics as I am just a beginner in this area with only one year experience. I see thinks different than you- it is like if you say the desk I am sitting next to is solid because I have no prove it is made of inter atomic vacuum. I say it is vacuum because It has been said by  E. Dollard, T Bearden, N.Tesla,Heavyside, Sweet Floyd, Hutchinson.......  Do you understand what I mean. While you read school physics books I prefer to study alternative science That's creating a balance

Still I believe it is true what I said- three components can have different properties under different conditions. You might see different results if you get some differences in :   Frequency, duty cycle, inductance, distance between coils, thickness of wire,coil resistance,coil capacitance, type of impulse,magnitude of the impulse, rising edge time of the impulse,type of load, size of load, type and size of the core, permeability of the core, etc. So maybe we are looking for right combination to get our magic happen if there is any.

But you are right. So far nothing unusual has happening to me (us).  No problem, it is just one of several devices I mess with. Ruslans/Akula device and SM's TPU is my building priority.

EMJunkie: we need some more practical evidence of your findings.

[TinselKoala]

TK, can you link me to your 4 dolars Push - pull please ?

I found the video where Igor Moroz shows some experiments and it looks like he has also partnered coil. It couldn't be so interesting. What surprised me, he called that coil Hutchinson coil. Did Hutchinson experiment with some of these coils too?  https://www.youtube.com/watch?v=ByVwNQqNMJo

Cheers.

Please look a few pages back in the thread; I have already posted the schematic twice and photos of the completed unit as well.
The only components it uses are a 741 op-amp and two complimentary power transistors, such as TIP30 (pnp), TIP31 (npn), TIP32 (pnp)  or their "A, B, or C" variants, or nearly any other complimentary pair of transistors.

Thanks for your interest!

[TinselKoala]

Quote from Woopyjump:

"I am puzzled by the (amount of) lighting I got for 0.6 watt input!"

These are really incredible measurements! Woopyjump says the bulb's shining brighter than it does when plugged into a wall socket. It looks brilliant at full intensity in the video. Assuming it's shining at it's fully rated 35 Watts of intensity in Lumens, a light box of photo-voltaic cells acting at 30% efficiency should generate 10.5 watts of electricity. That translates into a whopping COP of 17.5>OU! This could easily self loop and run itself with plenty of exccess power left over. Powerful enough to replace nuclear fission plants! What's going on here?

Incredible is literally correct. Bad measurements lead out mistaken calculations of OU. (thanks MarkE).

http://www.youtube.com/watch?v=gi-hl2W86yk
Notice that the bulb lights much brighter on output of wireless receiver than it does when directly connected to the 12 volt battery supplying the wireless transmitter.

Woopyjump has four Mosfets in tandem. Perhaps they run his operating frequency up into the Terahertz?

Hah! They certainly do not.

[TinselKoala]

Uh-oh. People at OUR have been doing the unforgivable: asking for EMJ's evidence for his claims. All is not well in OUR-land:

Re: Partnered Output Coils - Free Energy « Reply #321 on: 2015-02-03, 23:56:37 »

  @ALL

Right, that's it, Go and Fuck yourself evolvingape!

Its got nothing to do with you!

I am out of here! [/q] ------------------------------- Kind Regards

   Chris Sykes - hyiq.org
   To Reach New Horizons!
-------------------------------

Next stop.... energeticforum?