Understanding how Tesla did it

[Lightwave]

These Tesla Patents are all filed in a row and end in his two radiant energy patents.

685 953
http://tinyurl.com/cl46d

685 954
http://tinyurl.com/8lr7p

685 955
http://tinyurl.com/aahkv

685 956
http://tinyurl.com/a37u6

685 957
http://tinyurl.com/8pfjl

685 958
http://tinyurl.com/9upcc

These simple patents tell us that he was simply using two ground points with slightly different potentials, and slightly charging and discharging a cap between these two points.

IN the last patent of transmitting through natural media (Earth) 685 956 in the first diagram, in figure #2 part "R"  is a horseshoe iron core electromagnet that discharges itself by pulling a spring loaded short across the coils.  The short sets up a condition of a calapsing magnetic field as in one of his many patents 568,180.

The calapsing magnetic field is powered by the ambiant background (Earth's magnetic field "radiant energy"), and comes in a short impulse of hi voltage energy. He used choke coils to momentairy hold the charge on a capacitor before discharging into a circuit. You can do this more efficiantly by using a diode instead of the choke coil.

One thing you have to understand is that Tesla broke his discoveries up into parts that have to be added back togeather to make fully operating devices.

By utilizing the difference in voltage between the Earth and the atmosphier, a cap can be charged slightly. If the cap is simply swhitched and discharged into the same circuit in conjunction with a diode, and through a coil with an iron core, 98% of the first charge is added to the next "discharge charge combo", untill the cap is running at full capacity in a resonant circuit. Simply add a secondairy in the iron core coil to power what you want through another set of caps to keep resonance of the circuit at full load no mater the what the added load is.

Completly understood by most every one, but very simple in it's real understanding.


Lightwave

just drew this up.. A bank of AC caps can be used, or roll your own from tinfoil and thick polly. (I wasted $20 on a role of 7mil industrial cling rap, and it wouldn't hold any more then 400 to 600 volts and would burn a hole through it any higher. got lots of cling rap now though, and lots of tinfoil to make baked potatoes with. Been eating them all winter.  Ha.ha

[Lightwave]

Modified circuit.

[rlm555339]

Where does the 0.6 volts come from that it takes to overcome the P/N junction of the diodes?  Why doesn't every 1000 foot roll of wire you buy off the shelf carry this charge?

[Lightwave]

Where does the 0.6 volts come from that it takes to overcome the P/N junction of the diodes? Why doesn't every 1000 foot roll of wire you buy off the shelf carry this charge?

Someone  else asked in private to clairafy on some other points as well, so I'll try to satisfy both of you.

First, in the diagram, I added the bottom diode, and it is not needed in that setup. My mistake.

If you take an antena and a ground, and place a cap inbetween, a voltage will devlop inbetween. If you take two ground points on the Earth, the further apart, the greater the difference in voltage. When you byest a cap between these two points, and then reverse the cap, it has a greater potential difference to discharge between the state of the cap and the state of the two conecting points.

A roll of wire on the shelf  is not connected to an antena and a ground with a cap inbetween.

Look at it from a different angle as a potential weight being pulled by the Earth's gravity.

If you try to get under that weight and lift it up, and just hold it there, you can only get it so high, and continiously expend energy.  That's how we normaly generate (expend) energy, we are continiously pushing.

Now take that same weight and attach a spring on it and hang it from some where high, and give it a  little push up, and then let gravity pull it down further then when you first disturbed it. At this moment, give it another push up, with just the same amount of energy, and the weight will go higher. With expending far less energy then originaly, we can "lift" that weight far higher then with brute force.

Logic

A cap and a coil act like a spring and weight. The bigger the capacity, the springer it acts. All it needs is a "slap on the ass".

Timing is everything, and may have to be adjusted as energy is increased. It's possible an inishal small charge is needed to first excite the swing of energy, but I doubt it.

The "ambiant background pressure" is far greater then the energy we generate, and slosh back and forth. 

Timing is everything, and there are many different ways to hook up circutry and "time" to get varied resaults. I will be building a "dual system" with a bifilar teepee winding, capable of various different hookups for experimenting with.  If any others are intrested in replicating, we can try sending signals to each other  to work out a "free" comunications system. Including a "free" unlimited capacity internet using existing technolagy, and just simply modulate on Earth ground scalar waves at twice the speed of light. Maybe...

timing

1. cap contact to lower  iron core (ground), and antena. Small possitive charge on antena side.

2. then top of iron core (top diode) is contacted to discharge cap. antena remain contacted.

3. when the cap is discharged through a diode and a coil with an iron core, a magnetic (bubble) is formed inside the core altering it's normal state with Earth's magnetic field. the following magnetic field callaps and inward rush of the Earth's magnetic field (radiant energy) produces a  pulse of energy transformed directly to a higher voltage.

this leaves the cap in a reverse state of charge then started with.

4. contact is broken from top of core first after discharge and reversal of energy.

5. A state of a "calapsing magnetic field" produces what is comonly knwon as a "scalar wave". Something that is not very well named, or understood.

Scalar means scale, as in harmonic scale, but does not describe the ability for energy to flow in two different directions at the same time, but within phase with each other. Tesla called it a condition when the energy would rebound or reflect from the end of a wire with a reflector (something round for the electrons to spin on, if the length of the wire met the condition of the length of the wave, a "standing wave" ocures.

This wave caries up the teepee and reflects back to the cap and is "magnified" by the open coil of the teepee from the Earth's magnetic field again, like a snowball rolling down a hill. Electrons rush up from the ground to ballance the energy state on the other side of the cap (or bank of caps).

5. contact is broken with tepee coil and cap is reversed conecting ground first , and then antena repeating.

While this is happening, the secondary circut and cap combo go into ossilasion, and the rotation of the cap charge will be half the cycle of the seconday, "like a piston firing in a 4 cycle engine" as a positive charge will always be dis-charged at the top of the iron coil.

A second setup which may work better or not, is to hooke the teepee coil directly to the iron core coil, so it ossilates with the secondary to a certain extent. The teepee coil could also be hooked with it's own iron core coil secondary. I still think the first way will work best.

My setup will be sort of a double version of this (a two cycle engine) , with another cap between the two bifilar teepee coils at the top.

And like Tesla, I will also be using the "kickback" of the rotary motor winding as well. Also a scalar wave generator. patent#568,177 and 568,180, as well as some of my own ideas.

Think of a Scalar wave as instead of the current going in a circle around a closed circut, the electrons spin at near 90 degrees, like the wind when a big fraight liner truck barrols past you, and leaves a bunch of spiraling wind as the energy bleads off. The wind spirals in the opposit direction on each side of the truck just as the electrons spiral on each side of the calapsing coil field.

As this happens, instead of a regular magnetic field around the wire with a right hand rule of thumb, the magnetic field instead roles like a smoke ring down the wire, as the wave of energy  spirals electrons down the conductor. Natures most effeciant transport of energy. Induction at near 90 degrees for "almost free". No back emf. Like a snow ball rolling down a hill.

Lightwave

[prometheus_effect]

If you try to get under that weight and lift it up, and just hold it there, you can only get it so high, and continiously expend energy.  That's how we normaly generate (expend) energy, we are continiously pushing.

Hi LightWave,

Lifting the mass requires work (energy * time) to be done. Holding it does not. It is only a force and a piece of wood can replace your muscles. Where then does your energy come from?

Remember energy = force * distance the mass moved, and work = energy used to move the mass * time it took to move the mass.

Greg