Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Self Running Micro TPU, with closed loop.

Started by EMdevices, November 12, 2007, 11:49:58 PM

Previous topic - Next topic

0 Members and 34 Guests are viewing this topic.

Print
Go Down Pages 1 ... 58 59 60 61 62 ... 139
User actions

starcruiser

#295
November 30, 2007, 08:05:30 PM
The coil material would have a bearing on this effect though.
Regards,

Carl

Bruce_TPU

#296
November 30, 2007, 08:50:47 PM
Hello All,

This is my rewound barium ferrite coil core.  Secondary wound in the same direction as Primary, also, more turns.  Also, HV electrical tape separating the primary and secondary, instead of the tissue paper I had been using.  I expect good results with this coil core.   ;D  Cudo's to Dr. Stiffler for proper winding instructions.

Holiday Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Grumpy

#297
November 30, 2007, 11:19:06 PM
yup...
It is the men of insight and the men of unobstructed vision of every generation who are able to lead us through the quagmire of a in-a-rut thinking. It is the men of imagination who are able to see relationships which escape the casual observer. It remains for the men of intuition to seek answers while others avoid even the question.
                                                                                                                                    -Frank Edwards

Bruce_TPU

#298
November 30, 2007, 11:55:09 PM
Hello All,

I have added my rewound barium ferrite coil core.  I have one lead of the primary not connected.   ;D The other lead of the primary goes to the positive + side of the 1000uf capacitor.

Both leads of the newly wound secondary goes to the negative side of the 1000uf capacitor.

I then placed another 221 ceramic between the leads of the secondary.

New BEST time:  38 minutes 52 seconds

Total time gained tonight: 1 minute 22 seconds.
Good progress for the night.

Tomorrow night, I will hook EM's version of DR. Shifflers circuit to the oscillator.  It should be interesting.  I also want to experiment with placing a primary in a different place in the circuit.  Tried putting it on the positive side of the 1000uf cap and forgot to use a diode (just realized)  ;) and it did not work (will try a new germanium tomorrow night!).

Holiday Cheers, and good night,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

4Tesla

#299
December 01, 2007, 12:49:57 AM
Hi all,

I haven't gotten my toroids yet, but found a couple in an old PC PS I had.. going to wrap one tonight and try the original MTPU circuit.  I'll let you know when I get it working.

Edit: I haven't been able to get mine working.  :-[  When I get my other toroids, I'll try again.  Man, winding toroids isn't easy. :)  Since the TPU uses the Earths magnetic field, which isn't very strong, has anyone tried a stronger magnetic field by putting magnets on both sides of the coil?

Edit2: Got it working  :) but short run time - about 4min.

4Tesla
Print
Go Up Pages 1 ... 58 59 60 61 62 ... 139
User actions