Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Thane Heins BI-TOROID TRANSFORMER

Started by shimondoodkin, July 24, 2009, 11:33:44 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages1 2 3 ... 74
User actions

shimondoodkin

July 24, 2009, 11:33:44 PM
Thane Heins has new coil setup

BI-TOROID TRANSFORMER

http://www.youtube.com/watch?v=Fq_yGELmhV4

http://www.youtube.com/watch?v=RbRPCt1-WwQ&feature=related

and as i understand it is because of magnetic back emf pathways different shape sizes in different angels.

can anybody explain more on how this works, also i do no understand his general idea of his high voltage coils with low voltage coils.

why the right coil and the left coil are different and it looks like that there is somthing under the right coil.

Paul-R

#1
July 25, 2009, 11:27:37 AM
You could do worse than ask him, CRANKYPANTS, here:
http://www.overunity.com/index.php?topic=7530.480

wojwrobel

#2
May 14, 2010, 03:13:56 PM
hello

i just wanted to replicate this transformer and see on my own eyes that it makes more that it consumes !!!

so i did the core from special transformer material and now its to wind the copper wire and here i have a little proplem because i have no idea how to calculate this???

i have arround 1kg of copper wire that is 0,44 mm in diameter with insulation (laker)

so my question is how many turns i have to make on primery? for let say 12 vac input?
how to calculate this? resistance of the wire is 0,14 ohm/m

the core is
-center (primary) 13 x 35 mm
- sides are 20 x 35 mm

any help welcome
cheers from poland
wojsciech

ps. Mr Heins good job keep it going !!! i know there is many people that dont want this invention to go on !!!!! but by putting it on youtube and forums it may work and come out from shop !!!!

the_big_m_in_ok

#3
May 14, 2010, 05:52:53 PM
Quote from: wojwrobel on May 14, 2010, 03:13:56 PM
hello ...
i just wanted to replicate this transformer and see on my own eyes that it makes more that it consumes !!!
There are patents available that look something like what is being shown above in this thread, but they're not designed as free energy devices.  Fairly often they're used in the radio receiving and transceiving industry as frequency filters, etc.

I do encourage you to experiment.  If you can actually prove OU, it would be a big accomplishment.

--Lee
"Truth comes from wisdom and wisdom comes from experience."
--Valdemar Valerian from the Matrix book series

I'm merely a theoretical electronics engineer/technician for now, since I have no extra money for experimentation, but I was a professional electronics/computer technician in the past.
As a result, I have a lot of ideas, but no hard test results to back them up---for now.  That could change if I get a job locally in the Bay Area of California.

Bruce_TPU

#4
June 03, 2010, 02:27:20 AM
Hi everyone,

I want to post the following Thane Patent...

http://v3.espacenet.com/publicationDetails/originalDocument;jsessionid=00FF002D301F0117FAC673F115883C30.espacenet_levelx_prod_5?CC=CA&NR=2594905A1&KC=A1&FT=D&date=20090118&DB=EPODOC&locale=en_EP

Please pay SPECIAL attention to page 11 of 13 under the "Original Document" Tab.

SUMMATION:
Input Power - 0.29 Watts

Output Power - 11.51 Watts

Some of you, not yet involved in many builds should begin to replicate this right away, IMHO.  Appears not overly difficult to prove.  Just read and understand the part of the patent on "reluctance" to have a chance for success.

Cheers,

Bruce

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages1 2 3 ... 74
User actions