Here's a new one for you:
http://peswiki.com/index.php/OS:Chris_Brown%27s_KML_Coils
What I wrote in the intro:
I've been in communication with Chris W. Brown (rainmanp7) for about a month. He occasionally sends me video links, which I've not been able to make sense out of, and I've not had time to ask him about them.
Today, despite being super busy, my interest was piqued when he Skyped me with the following message:
"I'm about to blow everyones mind lol. I just made my overunity 1st power station in small form! and it works, and has a self adjusting power charging system. It can power 2 110 Volts house outlets, and it has KML stuff all over it. It's been in operation for over 6 hours now, and the battery is still holding above maximum charge. It's charging itself and giving off power and creating power as needed through the power inverter. [...] It's replicatable at every level."
I got on the phone with him for the first time, to ask more about what he had. He said he had been powering a television for several hours with his self-looped system. He said it ran nearly 7 hours in all before the system shut down because the battery input dropped below the threshhold required by the inverter.
In the overunity community, we say that the ultimate test of feasiliby and arrival is when a system pulls enough power from a free energy source (aether [inexhaustible, ubiquitous energy all around us] in this case?) to keep itself running, and provide excess usable power for other things, thus providing base load generator capability.
In this case, the "antennae" for harvesting aether is so ridiculously simple that the human tendency is to immediately dismiss it as preposterous. But it also makes it super easy to replicate and prove or disprove.
What is the key ingredient? A regular copper wire wound in a fairly simple coil -- so easly that an elementary school student could wind it.
He calls these "KML coils", drawing from some of Faraday's equations.
This TV set-up is something he pulled together in about an hour (he already had the KML coils made). Its off-the-shelf ingredients include one 12-volt lawnmower battery by Exide that cost around $24; a "Smart Charger" by Black & Decker that costs around $30 dollars, and an 800-watt inverter by Kawasaki that costs around $34. We're talking around $88 dollars in equipment that is readily available.
The charger is attached to the battery, the battery runs the inverter, and the inverter runs both the charger and the TV. That part of it looks like the classic perpetual motion arrangement -- lifting oneself up by his own bootstraps. What is different, here, is the inclusion of the KML coils. Between the battery and the inverter, and the battery and the charger are KML coils. But more importantly, attached to each terminal of the battery is one KML coil that is attached to nothing on the other end. These, apparently, are the antennaes to pull in aetheric energy.
Before today's experiment, Chris has been attaching the KML coils to batteries in vehicles, and apparently it has been increasing power and performance.
It's a shame that no numbers were provided for the Battery or the TV. I guess a TV does not consume much more than 70Wh, let's assume it was 100 Wh. The battery is 12V probably 50Ah, so it should be able to produce 600 Watts. From that alone you can see the 7 hours figure is too close to the Batt capacity.
Remember I am not a Skeptic! Please!
Quote from: sterlinga on April 15, 2009, 09:05:46 AM
Here's a new one for you:
http://peswiki.com/index.php/OS:Chris_Brown%27s_KML_Coils
What I wrote in the intro:
I've been in communication with Chris W. Brown (rainmanp7) for about a month. He occasionally sends me video links, which I've not been able to make sense out of, and I've not had time to ask him about them.
Today, despite being super busy, my interest was piqued when he Skyped me with the following message:
"I'm about to blow everyones mind lol. I just made my overunity 1st power station in small form! and it works, and has a self adjusting power charging system. It can power 2 110 Volts house outlets, and it has KML stuff all over it. It's been in operation for over 6 hours now, and the battery is still holding above maximum charge. It's charging itself and giving off power and creating power as needed through the power inverter. [...] It's replicatable at every level."
I got on the phone with him for the first time, to ask more about what he had. He said he had been powering a television for several hours with his self-looped system. He said it ran nearly 7 hours in all before the system shut down because the battery input dropped below the threshhold required by the inverter.
In the overunity community, we say that the ultimate test of feasiliby and arrival is when a system pulls enough power from a free energy source (aether [inexhaustible, ubiquitous energy all around us] in this case?) to keep itself running, and provide excess usable power for other things, thus providing base load generator capability.
In this case, the "antennae" for harvesting aether is so ridiculously simple that the human tendency is to immediately dismiss it as preposterous. But it also makes it super easy to replicate and prove or disprove.
What is the key ingredient? A regular copper wire wound in a fairly simple coil -- so easly that an elementary school student could wind it.
He calls these "KML coils", drawing from some of Faraday's equations.
This TV set-up is something he pulled together in about an hour (he already had the KML coils made). Its off-the-shelf ingredients include one 12-volt lawnmower battery by Exide that cost around $24; a "Smart Charger" by Black & Decker that costs around $30 dollars, and an 800-watt inverter by Kawasaki that costs around $34. We're talking around $88 dollars in equipment that is readily available.
The charger is attached to the battery, the battery runs the inverter, and the inverter runs both the charger and the TV. That part of it looks like the classic perpetual motion arrangement -- lifting oneself up by his own bootstraps. What is different, here, is the inclusion of the KML coils. Between the battery and the inverter, and the battery and the charger are KML coils. But more importantly, attached to each terminal of the battery is one KML coil that is attached to nothing on the other end. These, apparently, are the antennaes to pull in aetheric energy.
Before today's experiment, Chris has been attaching the KML coils to batteries in vehicles, and apparently it has been increasing power and performance.
my be if the output is like this in combination with circuit:
Hi folks ;D sounds very interesting and simple to replicate - we could do with more data on this, who originated these coils? a bit of a 'Daniel pomerleau' type appearance of the coils as well.
i have the battery and the inverter but its a modified sine not pure and it wont run the charger ive got, i tried a quick setup (minus kml coils) to test this but it kept faultering and stuttering the charger.
it would be great if this is increasing efficiency or better still ou - just staying neutral for a bit til further data comes up on this one 8)
catchya soon - eel ; ;)
can the creator test that thing in the wilderness or at least some distance away from electrical towers or radio towers?
my first thought was he is drawing wireless energy from the magnetic field of one of those nearby towers like some people do with lamps, it seems they power itself but they just found a right antenna for pulling energy from an electrical tower while the power company is wondering where all their power is going ..
edit: also what does clockwise and counter clockwise mean? a coil is both, depending on the point of view. a coil which looks clockwise wound from the isolated end is counterclockwise wound from the other side.
I say copper coat one of these windbelts and mount a long version of it parallel & beneath a high tension power wire.....capitalize on sympathetic resonance by timing coil inputs and switching to really ramp up efficiency.
http://www.youtube.com/watch?v=dZ0v-CK63-4
Gordon Lightfoot tells me that the wind in the wires makes a tattle-tale sound, so you'd better be careful of you try it.
TS
Terry Hewett posted this same thing without the coils a long time ago:
Looks really simple. Should be easy to modify vehicles like a boat or car for electrical operation and just add the Aether Power Antenna:
;D
I apologize, it has been a long day.
A simple test - charge the battery, hook up the inverter, plug in the TV, set the charger aside. See how long the TV runs.
- Duane
Thanks alot ResinRat.....I tore off my car antenna and replaced it with a twisted coat hanger and got nothing. zilch. nada.
I've had it. I'm giving up. I'm just gonna tear the floor out and flintstone it from here.
TS
Quote from: ChileanOne on April 15, 2009, 09:23:43 AM
It's a shame that no numbers were provided for the Battery or the TV. I guess a TV does not consume much more than 70Wh, let's assume it was 100 Wh. The battery is 12V probably 50Ah, so it should be able to produce 600 Watts. From that alone you can see the 7 hours figure is too close to the Batt capacity.
Remember I am not a Skeptic! Please!
Sterling post quote:
"been in operation for over 6 hours now, and the
battery is still holding above maximum charge"
Interesting
-Mike
This is really something to work on...and it is kind of related to Pomerlou's technique...and I believe would greatly enhance the power of his circuits.
Regards...
Very cool design. I think this idea can be used to do other interesting things. But my hunch doesn't explain the aether capability of it ;D.
Quote from: Cap-Z-ro on April 15, 2009, 05:29:01 PM
This is really something to work on...and it is kind of related to Pomerlou's technique...and I believe would greatly enhance the power of his circuits.
Regards...
The KML coil reminds me of the original "s1r9a9m9" coil design that he used to water fuel his car (in watercfuel1978 yahoo egroup).
http://groups.yahoo.com/group/WaterFuel1978/photos/album/1221501518/pic/1075302789/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc (http://groups.yahoo.com/group/WaterFuel1978/photos/album/1221501518/pic/1075302789/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc)
Maybe adding an iron core (16d nail) enhances the KML effect, like s1r9a9m9's coil?
-Mike
I agree with you vrand...this has many applications with many possible variations.
Its now just a matter of time with all the talent here and on other free energy forums.
Regards...
Quote from: Cap-Z-ro on April 15, 2009, 06:55:21 PM
I agree with you vrand...this has many applications with many possible variations.
Its now just a matter of time with all the talent here and on other free energy forums.
Regards...
Yes, there are lots to experiment with these unusual coil designs ;)
This KML coil also has a little resemblance to the Dr. Wilbert Smith, Caduceus, Tensor Coil, where unusual effects were noted, (where the inside wires cross each other).
http://jnaudin.free.fr/docs/smithdoc.htm (http://jnaudin.free.fr/docs/smithdoc.htm)
-Mike
Thanks for that info vrand...its a very different concept from the KLM coil...but very interesting in its own right.
I wish there was a more readable text on it...my eyes bugged out after 2 pages. :)
Regards...
@resinrat2,
brilliant, how much?
Where can I get one.
Why is there not an aeroplane version?
What about electric drills and mixers?
Vacuum cleaners (now there is a thought), or should we call them aether cleaners?
Phil
@Sterlingda,
So sterling did you look at curled ballistics on this site?
What did you think?
Phil
So the obvious question is why didn't the discoverer set up TWO systems, one with the KML coils and one without and run them side-by-side?
It would really suck if people went to their local stores and clean up the shelves with inverters and batteries just to find out that there's no difference whether these KML coils are there or not. Unless this is some kind of a plot to sell more car batteries and inverters by large store chains? :P
An open ended coil is a resonant coupler for field polarization - that is coupled to a fluid elastic medium..and the coil, on this side of it's q hump.......is a faster capacitor than a capacitor.
It can be charged slow..(and float at the line's voltage) and when asked, it will add it's mass into any load it is connected to, if the spike of the draw is as fast as propogation in the given coil length and design.
If the inductor is terminated, the metallurgical/molecular mass must be polarized (v) to a state of conduction before current flows. If current flows, the mass polarization effect of an inductor kicks in and thus the issues.
In the case of the open ended inductor, below the frequency knee of it's response, it will not do anything at all. Above that knee it will become like a mass that is connected to the system. If the voltage on the wire attempts to drop, the mass of the coil connected to the line will try and dump mass into the line to prevent any drop across that coil. There will be a resonant fluid filed coupled characteristic to it, in 3d form.
The battery is also a fluid elastic mass system, as is the charger and load.
Two across the terminals would produce something interesting. They also have the capacity to couple to one another.
Try putting open ended coils on motors. (Brushes, etc) That gets interesting.
WOW THIS IS AMAZING !!! :o
WE can include this in our TPU !!!
i think we can combine some carbon here to make it more powerful ! 8)
Quote
Unless this is some kind of a plot to sell more car batteries and inverters by large store chains?
Oh....I think it goes much deeper than that.
Those marketing types will stop at nothing and think nothing of wading hip deep in many layers of 'con'.
TS
Think of it this way:
For CURRENT to conduct, or flow, in a given inductor..and for it to ONLY THEN have the properties of INDUCTANCE........FIRST.....BEFORE that takes place..... a POLARIZING voltage MUST flow through the wire length at it's PROPAGATIONAL VELOCITY.
Once the polarizing FIELD of VOLTAGE reaches the OTHER end of the coil and then the last structures are as polarized as they can be and the field is established..... THEN current conducts.
However, one can have an open ended coil..where the polarization is extant at at HIGH voltage level.... and when a current spike is encountered..this would attempt to be a DIFFERENTIAL across the coil and it will DUMP CURRENT at propagational velocities INTO the sagging line. If the draw rate is BELOW propagational velocities ie, approaching it and below it..then the coil will not dump current. It will vary with the load.
People forget this essential point about INDUCTANCE and COILS..as they never look at propagational velocities in their 'engineering real world'. Well....with fluid-vortex analysis (magnetic systems, for example) and quantum analysis ---it comes to the fore. Newtonian analysis doesn't bother with it, but in reality, it is quite critical and it is critical to understanding the fundamentals of LCR and inductance in this case.
Read up on it.
Imagine, if you will.. 10 miles of power line that are CHARGED and open on the other end.
Now try and disconnect that load.
What will happen?
Same thing here.
The sharper (time-shorter and sharper) the spike of the current draw off the battery, the more effective the coil is.
One has to adjust the coil turns, resistance, etc..to get the most effective coil for that 'spike-drop' application.
Now, what can be done with that collapsing current dump/spike coming off the polarized open-ended coil...when attached to motor systems?
Do you see it now?
This velocity (propagation) driven effect combined with the mechanical aspects of the fluid-vortex field in the magnetics (the vortex twist provides more energy-and changes/lengthens/polarizes the time constants/angular components-think Indian mercury torus) is how Newman's systems work.
Simple, basic considerations of the properties of inductance.
QuoteDo you see it now?
This velocity (propagation) driven effect combined with the mechanical aspects of the fluid-vortex field in the magnetics (the vortex twist provides more energy-and changes/lengthens/polarizes the time constants/angular components-think Indian mercury torus) is how Newman's systems work.
Simple, basic considerations of the properties of inductance.
Ahhh....but of course. The simple, basic considerations of the properties of inductance. You know, I used to be velocity driven myself. That is, until I discovered that life in the 21st century is rather like a box of chicken mcnuggets....
Cheap, Gristly, and never more than half baked.
I kid.....mostly.
But I digress. Please continue with your Sweet lecture on Beardenian wire wrangling 101
TS
Prophmaji,
The last two posts hardly made any sense to me as they were a mixmash of different fields and disciplines, could you please rewrite your ideas into conversational English so that we understand it?
Thanks.
@Sterling_A
Here is a crazy setup that can be easily replicated and tested...
(with and without the KLM coils, and with some amp meters of course).
This thread comes at the right moment!
I was planing to purchase a new battery, another bat charger, and a 1000 watts inverter.
But, according to Google, the 800-watt Kawasaki inverter is a "Modified Sinewave" device.
My question is : will the Black & Decker "Smart Charger" be happy with
a Modified sinus or does it need a pure sinewave as input???
According to the announced price and the picture I guess that it is
the Black & Decker 15/10/2 Amp Smart Charger.
Another question, please: how many amps/hour for the bat?
Is it 45/55 amp/hour???
Very Best
Quote from: NerzhDishual on April 16, 2009, 03:49:38 PM
@Sterling_A
My question is : will the Black & Decker "Smart Charger" be happy with
a Modified sinus or does it need a pure sinewave as input???
Very Best
I don't think it matters. After all a battery charger is simply a transformer coupled with a rectifier. The transformer will work with AC or pulsed DC. After it is stepped down it is rectified, so again it does not matter if the input signal is AC or pulsed DC The output is DC.
It would be different if you were to drive an motor AC motor with the inverter, but that is not the case here.
Hans von Lieven
sterlinga said:
Quote
...He calls these "KML coils", drawing from some of Faraday's equations. ...What is the key ingredient? A regular copper wire wound in a fairly simple coil -- so easly that an elementary school student could wind it. ...These, apparently, are the antennaes to pull in aetheric energy.
...In this case, the "antennae" for harvesting aether is so ridiculously simple that the human tendency is to immediately dismiss it as preposterous. But it also makes it super easy to replicate and prove or disprove.
>>It occurs to me this is a device similar to Tesla's radiant energy system. Would larger coils give more power?
Would very large coils generate enough voltage to affect the battery charger, inverter or TV badly?
Ham radio operators are very wary about touching an ungrounded lengthy insulated wire after a period of time. Static shocks are hazardous to dangerous. It might happen to your equipment?
--Lee
the_big_m_in_ok
So far, minus the coils Chris showed in his post, I have a 350 watt inverter running off of a 7 year old battery and a 12V battery charger that is set to 2A. I plugged a floor fan into the 2nd outlet of the inverter and recorded my starting voltages and time.
I have been up and running with the fan (1.1A) on Medium speed since 7:30. That is one hour continuously, and the voltage is still being maintained at 12.6 with little change.
I will let the setup run for at least another 30 mins. Tomorrow I will hook up some of the coils and see if there is any marked difference in voltage readings for the same time frame.
DCM
Took the latest reading at 9:37 PM and holding at 12.53V at the battery. The meter on the front of the charger is resting at the "off" point, so I'll need to hookup an amp meter in series to truly get an accurate reading at the charger output.
Turning in now, I'll let it run all night or until ????
DCM
Quote from: Prophmaji on April 15, 2009, 11:11:43 PM
An open ended coil is a resonant coupler for field polarization - that is coupled to a fluid elastic medium..and the coil, on this side of it's q hump.......is a faster capacitor than a capacitor.
It can be charged slow..(and float at the line's voltage) and when asked, it will add it's mass into any load it is connected to, if the spike of the draw is as fast as propogation in the given coil length and design.
If the inductor is terminated, the metallurgical/molecular mass must be polarized (v) to a state of conduction before current flows. If current flows, the mass polarization effect of an inductor kicks in and thus the issues.
In the case of the open ended inductor, below the frequency knee of it's response, it will not do anything at all. Above that knee it will become like a mass that is connected to the system. If the voltage on the wire attempts to drop, the mass of the coil connected to the line will try and dump mass into the line to prevent any drop across that coil. There will be a resonant fluid filed coupled characteristic to it, in 3d form.
The battery is also a fluid elastic mass system, as is the charger and load.
Two across the terminals would produce something interesting. They also have the capacity to couple to one another.
Try putting open ended coils on motors. (Brushes, etc) That gets interesting.
Kikers Coils looks similar in function:
http://kikerperformance.com/howtheywork.htm (http://kikerperformance.com/howtheywork.htm)
How Do Kiker Wires Work?Assuming the current travels from the coil pack to the spark plug, spark energy supplied from the coil encounters a self-induction winding about six inches from the spark plug. The coil generates a magnetic field that will travel down the wire to accompany the electric field also traveling down the wire toward the spark plug. The self-induction coil enhances the original value of henrys and at the same time spaces out the delivery of milliamps to the plug. The milliamps are what actually fire the mixture rather than voltage. Three energies are distributed within the wire in this fashion. These three energies move at slightly different velocities. The accompanying magnetic field creates three sparks across the gap. This action by the enhanced spark generates a much stronger and more positive initial firing of the fuel. The strong ignition helps to prevent flat combustion and dead spots within the air-fuel pockets of the chamber. The Kiker Wires have been proven to work on all vehicles so far. The gain in mileage is about 2-5 mpg. With some vehicles showing larger gains. Plus gains in power and torque.
Kiker Wires have almost zero resistance! They have the lowest ohms on the market today. Most spark plug wires claim to have the lowest ohms at 30 to 40 ohms per foot. Kiker wires have 0 to 5 ohms per wire, even up to 60 inches long.
The wires also produce a multiple spark in each wire [2-3] per wire. Thus burning fuel more efficiently in each cylinders, cleaner emissions, using less gas, causing the engine to run smoother and more efficiently.
The Battery Booster Works On The Same Principle As The Wires.
The Magnetic Field and the Energies created by the Battery Booster run through out the electrical system and motor to Ionize the Fuel. Which Improves the Fuel mileage, Increase's the power, which in turn seems to help the motor run smoother.
Interesting, and he sells them ready made.
-Mike
Quote from: NerzhDishual on April 16, 2009, 03:49:38 PM
hello NerzhDishual
where do you live ? in europe ! ( france ?)
where do you buy magnet wire ?
thanks a lot
A+
@Hans_Von_Lieven
Thank you for your feedback.
My actual cheap bat charger delivers 10 amps.
I guess it is too much. Anyway, I will make some measurements.
@Tagor
I live in Brest/Brittany/France.
I used to order my magnet wire (small spool) at Radiospare.
(http://radiospares-fr.rs-online.com (http://radiospares-fr.rs-online.com)).
I now order it in a local "winder shop" (electric motor repairer).
They kindly accept to sell me some used big spools.
I have made my KML coils out of a simple rigid insulated copper electric wire.
(Copper diams 1.5 mm and 1.8 mm).
Very Best
i have a non-aether idea for how it runs,
i think the kml coils are performing the same function as the inductor coils beside the DeQing diode in tesla circuits. the discharging spike would be what is activating the coils, and the battry charger would provide a relatively smooth input (maybe some mains frequency)
a core in your coils could increase the coils capacity (rated for your discharging frequency ->inverters change it to HV at high frequency and then switch on/off at the lower fq).
hopefully you like that, or maybe i misunderstood something..
On around April 18, 2009, Arthur Manelas said he tried setting up something nearly identical to what is reported on this page, with a KML coil, a battery, inverter, and charger, and saw "no change" from the control.
http://peswiki.com/index.php/OS:Chris_Brown%27s_KML_Coils#Replications
Someone who has no funds to buy a battery or inverter could make the coils as shown on the first page of this thread and use a volt meter to see if he gets a .3 volt difference.What you need is some insulated wire of the proper gauge.Make the two coils open to the air(nothing but the battery is attached to them).
I would like to know if any current comes from it.Triffid
YOU NEED BIGGER COILS.
open ended ones. As in the diagrams.
Here's a patent that shows how this works.
I stress that many thousands of these are in use-everywhere. It's a patent for an effective current dumping coil design.
In the supplied patent, the coil is closed, ie current draw/inductive field. That consideration is not all that germane to this situation. BUT..one can use a coil to pass DC through FROM the battery, ie BETWEEN the inverter and the battery. On the inverter inductor side of that inductor..put the open coils. This will force(create preference for) draw from the open inductors.
I stress that the open ended coil is what you want in a DC or transient draw/dump system. Just use big ass ones with low internal impedance. At first, try old chokes from ebay, the huge ones for old tube audio gear. That is your best bet for finding such items to do simple tests.
What you are trying to do..for the given situation is to find/grok/ascertain the correct combination of draw requirements vs available draw, which will be a relationship between coil impedance and draw considerations.
The open ended coil is energy storage at 'no cost'. Any peak transient draw is aetherically delivered. In a closed coil system..this is NOT true. In a parallel OPEN coil system (connected as close to the load as is possible) , the energy draw is aetheric. Ie, field differentially derived.
The sharper and noisier the draw from the inverter..the better. Remove any input smoothing coils the DC input section may internally have and allow that prior RF'ish 'noise' to do it's job!
Let's look at the patent. a Low impedance coil....over 1000 ft long..large inductance of 3H. Hhmmm... Speed of propogation is..let's estimate 85% Speed of light..that means that for the propogation speed vs the wire length vs inductive slow down of the propogation rate..take those all together as a calculation and that is the time frame for any transient draw off the inductor that will be atherically delivered to the transient draw of the given load. This is why it can be seen that the more occurrences of steep draw you can have..the better! Ie, very high frequency DC conversion is the best bet. THERE WILL BE RF NOISE. Where do you think the energy comes from? It comes from the splash of 'created' differential field across the coil when the DC inverter attempts to draw power from the battery and it 'takes' the peak transient draw from the open coil. the energy ONLY 'appears' when the line attempts to sag and thus a differential appears... and the coil tries to maintain it's stability..and like the charged long power line, or like the loaded coil...It will current dump. In the case of an open ended long and big coil..this will happen ONLY below the propogation speed of the wire length in the coil!! Ie very short transient spikes or draw will be 'covered' by the the energies sitting in this 'polarized' (12VDC) but unterminated coil.
The energies are nowhere near that of a fully loaded up and conducting coil..but unlike those energies...the open ended energies come at NO measured cost. They are procured though the aether.
Unnerstand?
http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=6&p=1&f=G&l=50&d=PTXT&S1=Gray-Richard.INNM.&OS=IN/Gray-Richard&RS=IN/Gray-Richard
So it looks like to me an inverter is necessary to see this effect and the more noise(RF) it can make the better?Triffid
Quote from: triffid on May 05, 2009, 10:09:02 AM
So it looks like to me an inverter is necessary to see this effect and the more noise(RF) it can make the better?Triffid
That's an intriguing patent for sure (although how the guy managed to get a patent for 'a large induction coil' is beyond me because that's all it is).
Anyway, here's a couple of links that may further understanding:
http://en.wikipedia.org/wiki/Inverter_(electrical)
http://www.smpstech.com/tutorial/t03top.htm
It may be that not just 'any' inverter will do. There are different types. A basic one is not hard to build for experimental purposes. How one identifies the ideal models in the marketplace is another matter.
Did anyone ever figure out what's going on in these KML coils?
I suspect that there's a cancelling of magnetic fields, increased capacitance and voltage.
One other thing that I've thought about is the notion that radiant energy seems to be concentrated at the inside of a coil core. Could it be that there's an interaction between the coil's radiant component and the effects described above to make it an ideal coil for accessing or transducing energy from the electrostatic environment?
bob
Maybe this KML coil is similar to TREC. But still in TREC i dont know how the electrons is collected in capacitor if the metal plate is insulated? Can someone explain that?
Quote from: Neo-X on August 06, 2014, 04:01:47 AM
Maybe this KML coil is similar to TREC. But still in TREC i dont know how the electrons is collected in capacitor if the metal plate is insulated? Can someone explain that?
It's charge that accumulates on the capacitor plates not electrons. Electrons don't hardly move at all in a conductor, far too slow
to be actually what accumulates on the capacitor plates or powers a load.
Just as the displacement current flows through a capacitor the charge accumulates on the plate as if it were a capacitor plate,
but the charges Tesla says are from cosmic rays striking the plate and depositing positive charges on it.
The positive charges deposited on the plate accumulate on the capacitor positive plate and the negative charges from the ground
accumulate on the negative plate.
The rate of energy collection is feeble by Tesla's own words and is mainly a discovery rather than a useful power generation
device, it could power very low power devices like clocks for as long as the device lasts. And it does in fact work but people
expect more from it than it was ever able to produce. So it's just as OU in principal as anything is.
Any device that outputs more than is supplied by us is doing something similar, it's utilizing energy from somewhere, nothing
creates energy, and so anything that outputs more energy than "we" input is OU. It's that simple, that means solar wind and
hydro ect. are all OU because they output more energy than is input by us. The efficiency of conversion the free energy
harnessing device has is irrelevant. What makes OU is energy supplied by us compared to energy output to a useful load,
there isn't anything else OU could be defined as.
The big OU scam is that there is no OU already.
..
Quote from: Farmhand on August 06, 2014, 04:59:52 AM
It's charge that accumulates on the capacitor plates not electrons. Electrons don't hardly move at all in a conductor, far too slow
to be actually what accumulates on the capacitor plates or powers a load.
Just as the displacement current flows through a capacitor the charge accumulates on the plate as if it were a capacitor plate,
but the charges Tesla says are from cosmic rays striking the plate and depositing positive charges on it.
The positive charges deposited on the plate accumulate on the capacitor positive plate and the negative charges from the ground
accumulate on the negative plate.
The rate of energy collection is feeble by Tesla's own words and is mainly a discovery rather than a useful power generation
device, it could power very low power devices like clocks for as long as the device lasts. And it does in fact work but people
expect more from it than it was ever able to produce. So it's just as OU in principal as anything is.
Any device that outputs more than is supplied by us is doing something similar, it's utilizing energy from somewhere, nothing
creates energy, and so anything that outputs more energy than "we" input is OU. It's that simple, that means solar wind and
hydro ect. are all OU because they output more energy than is input by us. The efficiency of conversion the free energy
harnessing device has is irrelevant. What makes OU is energy supplied by us compared to energy output to a useful load,
there isn't anything else OU could be defined as.
The big OU scam is that there is no OU already.
..
Do you mean the electrons in the plate vanish after it was stricked by a cosmic rays and so the plate become positively charged? Then where did the electrons go? Disintegrated into a tinier particle?