Background discussion of TT`s Pyramid

[energia9]

I am very pleased I started this thread . It keeps stuff off the main thread that is not strictly relevant , and we have got some interesting discussions going on .What sets the pyramid apart from some other borderline technology ,is that the output is watts rather than milliwatts .OK . the power density is still quite low , but this is still in its infancy .Once we see replication , the scope for experimentation is huge . Once we understand the "how" , we might make better reactors .The pyramid is not necessarily the best shape for the job . Substitutes may be found for the gypsum boards . What about some specially treated , waterproof cloth ? The whole thing then becomes as portable as a tent . Then there is the problem of scale . A one metre pyramid harvests about 16 watts from one square metre of earth . So a small half metre size may give 4 watts , and that will light a hell of a lot of LEDS or possible charge your phone .
@ Ben K4ZEP . During tests , TT does not fit the fourth side panel to his pyramid . If you remember , please ask him what percentage power loss this causes .

do not limit your self 16 watts/ per square metre!!!   i know that pyramid is not the best shape for this,  dont limit yourself what thomas says,  my intuition tells me it is simple and we can power our house and we dont even need 1 metre space for the device.   there are lots of possiblities out there,   Btw the human body and brain defies the so called "laws" of physics which are not existent. they are here to limit us so we dont want to (cant) develop further ,  so the human brain and body should not work does it??  you know how complicated it is, there is no such device in the entire universe which is compared to a biological system like this vessel.   all the codes are encrypted inside of us.    There is absolutely nooo limit to anything, we only limit the time of experimentation and therefore there are smaller chances of developing this further.

[fritz]

I think that the Pyramid setup is just one way to tap that.
Comparing TTs comments and P.Marcovich claims is quite interesting.

A very interesting statement of TT was that his setups never worked with
litz wire.... compared to PM who prefered silver and gold over copper.

If there are some very high frequencies involved - there would be an extreme skin-effect,
and the usage of litz-wire would be not appropriate.

Another point is the interaction between receiver and transmitter.
Somehow I think that this energy is not offered as a general radiation...
It seems that the receiver somehow excites / syncs the transmitter.

[neptune]

An interesting clue as to how this might work . I have studied TT`s video`s several times . When he winds the inner coil , he temporarily fixes the wire with a piece of insulating tape . But he says that is very important to remove the tape when the coil is completed . In contrast , the outer coil is very firmly taped in position . This suggests to me that while the outer coil must be fixed ,the inner coil possibly needs to be able to physically vibrate . I could be wrong here , but until we know better it is important to follow all instructions .
       Another practical point .when assembling the reactor , I would glue the wire exit points and strip the wire ends before filling the sand . This avoids inverting the reactor or knocking it about with the risk of disturbing the sand .

[NickZ]

  Although the understanding of why this type of pyramid works is of course an important point, but, it is not necessary to be able just replicate it, and see in action.  It is possible that it is simply a type of capacitor, pulling in energy from the air, and separating the charges. On the other hand the fans input and his capacitor together may be working similar to how the toroid coils function in other devices, to  produce the additional voltage.     
  We don't know how much Aether per cubic meter is present, but there is a constant stream of it. 
  He has been working on this project for years and although still in the beginning phases, and as yet possibly not yet replicated to the same or higher output, there may be a limit to what size is feasible. 
For now it has one of the strongest outputs of most any of the free energy devices. 
  I will remind you all that the MITTs dome device, is less than a foot in size, and can start a car motor with its output, but again un-replicated.
Does that make it nonsense?

[neptune]

@NickZ .I can not say much about the Dome device as I am not familiar with it .Link please? .You say it is unreplicated , is it open source?  Thomas has been working on the pyramid for many years . I would guess that the reactor is much more than a simple cap , as he would have tried this early on . The great news today is that we now have a guy in Germany , with a reactor that Thomas confirms is working .This is a massive step forward . If I understand correctly , Thomas sold the rights to the V6 version , and gained nothing but trouble . His decision to open source the V12 is the wisest thing he ever did . He admits that he has built better versions than this . But soon he will have something he never had before . A worldwide team of dedicated enthusiasts to take up the baton and run with it . Inevitably , there will be more research done in the next year than in the previous ten .New minds and fresh thinking will be brought to bear .I would like to bet that the best is yet to come .We ain't seen nothing yet . But even in its present form with 16 watts per square metre , it would be a godsend in a third world village . Better than solar for lighting , no batteries necessary . Watch this space .
@Madsatbg . It is interesting that your reactor gives different voltages in the house and outside .Perhaps we could use this as an alternative way to find "nodes" for those who are no good at divining . Just walk around the field with your reactor and multi meter .