Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



How to make multiple Kicks

Started by Neo-X, November 23, 2013, 10:31:20 PM

Previous topic - Next topic

0 Members and 5 Guests are viewing this topic.

MileHigh

I will also make some comments on Bruce's second 2013 instructional video on the TPU:

http://www.youtube.com/watch?v=MOHk5YQoI44

Bruce states that the transmission line will be tuned to electrical standing waves and also to sound standing waves.  I can't think of any possible reason to tune the electrical transmission line to the sound standing waves.  Sound is mechanical energy and has nothing really to do with electrical energy in the context of Bruce's setup consisting of a long transmission line cable where the electrical signal goes back and forth inside the multi-strand cable.

Bruce talks a lot about the Shumann resonance with the fundamental of about 7.8 Hz and how both the electrical standing waves and the mechanical standing waves in his TPU transmission line are related harmonics of the Shumann resonance.  I am going to assume that this stuff comes directly from Steven Mark's writings.  There is a lot of misunderstanding about the Shumann resonance on the forums and people imagine relationships between their setup on the bench and the Shumann resonance.  This whole deal is a giant misnomer and I believe that various professional players in the free energy cottage industry intentionally misuse and exploit the concept of the Shumann resonance for their own personal gain.  Steven Mark is likely one of them.  The reality is that you never even have to think about the Shumann resonance ever.  It will never affect your circuit an for all practical intents and purposes it may as well not even exist.

Bruce says how Steven Mark discusses the Shumann resonance and how his TPUs tap into it.  That's the deal breaker for Steven Mark right there.  It's nonsense and therefore you are not going too far to conclude that the whole Steven Mark pitch is just a pitch with nothing to back it up.  Like I said above, you can forget about the Schumann resonance relative to whatever resonant circuit you are working on on your bench.  There is just nothing there, at all.  There is nothing to tap into.  You simply cannot capture any energy bouncing around inside the Schumann resonance, which is "pumped" by random lighting strikes.  It's simply nuts to think that you can do something practical with the energy in the lossy Shumann resonant cavity.  The energy is simply not there in any practical amount on your bench.  It would barely be detectable and the average Shuman resonant EM radiated power density per cubic meter of space is so ridiculously low that you may as well forget it.  I have to emphasize that the whole concept doesn't make any sense at all.

I don't think Bruce is a bad guy at all.  However his desire and passion to succeed may have compelled him to swallow the whole Steven Mark storyline and decide to not question anything.  In a way that's another form of "stealing."  This is not stealing money, but it's stealing someone's time and passion and mental energy because they direct it into a dead end and get nothing in return.  It arguably even hurts them because they construct a misguided belief system in their minds.  It's just as bad as stealing someone's money and that's wrong.

MileHigh

MeggerMan

Quote from: MileHigh on December 04, 2013, 08:22:08 PM
MeggerMan:

You are misunderstanding what the Nasa clip means.  There nothing new about magnetics discussed in the Nasa clip and in fact the basis of the discussion in the clip is our current understanding of magnetic fields.  All that that clip is about is an interaction with the solar particle wind an the Earth's magnetic field.  In other words, it's a clip about learning more about the "space weather."

It might sound good on paper but it just doesn't work like that.  We can't extract power from the Aurora Borealis!

MileHigh


@MileHigh

Maybe it depends on the way you interpret the article.

The important basis of this discussion is how the Sun's magnetic field connects with the Earth's magnetic field to form a conduit down which the stream of tons of energetic particles hit the upper atmosphere of the Earth.
The polar auroras and magnetic storms are a result of this connection and is not the main point of the article as I see it.

My thought is that if we can generate a connection portal using an electromagnetic device then we might be able to harness the magnetic energy in that portal - not from the energetic particles.

@Cheappower2012,
Excellent work!

Yes, my thoughts exactly - the open frame device just creates a high voltage.  He could have got this 90v from a 1.5V pulse generator / flashgun circuit.
It did strike me as odd as to why he puts the probes from the voltage meter to some test points instead of the crock clips to the lamp.
If you doing a true test you would have 2 meters, one for current and one for voltage and show the current rise as it was connected to the load.
Those heavy lamps were just too obvious.
Then to add insult to injury, he uses a heavy taped toroidal TPU to power the lamp with a simple plastic base - and if you notice at the end of the test he turns the TPU upside down on the table so switching it off.

Meggerman

Rosphere

Quote from: MileHigh on December 03, 2013, 06:10:27 PM
I don't have a scope or a bench, so I won't be making any tests.
...
Quote from: MileHigh on December 04, 2013, 01:46:36 AM
...You are just an ordinary guy like me playing with a scope, batteries, transistors and coils.
...


Did he mean, "You are an ordinary guy, like me, but you play with a scope, batteries, transistors and coils?"  That would be more consistent.

MileHigh

Rosphere:

What's your point?  Just go ahead and state it and I will be pleased to respond.

MileHigh

Bruce_TPU

I wash my hands of this thread with no moderator.

All future kick references or questions can be asked on my thread concerning the kick.

Nothing further will be given on this thread by me.

I turn this thread over to disunity incorporated.com

Nor will I respond to an individual SO skilled in electronics he doesn't even have a scope?  Really?  Doesnt that strike you all as "odd"?   :o

And he has no "bench"?  A bench is a coffee table with electronics to some or a garage or kitchen table or ANYPLACE to do an experiment.

So...conclusion.   what DOES he have?
1.  Hot air
2.  More Hot Air
3.  Asked a member of this forum to perpetrate a hoax on the communit to "teach" them a lesson.
Why?  Because he is a fraud.  Phony.  Fake.  This is fact.

And still many of you give this man the time of day.

He and tk and those like him are the reason that HUNDREDS have left this forum.  Myself included. 

Nothing will EVER be made public on this forum. 

Don't you all understand yet??? ::)

These will not allow it.  It is the reason they are here.

Energy is  billions of dollar empire.  If I were in charge of protecting that, I would put people just like this to dissuade you all from anything real.

Post on my thread ONLY about a kick experiment or question or it will be deleted.

Grace and peace,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.