Real overunity transformer with ancient technology

[NdaClouDzzz]

And Lorrie Matchett's 3rd Generation youtube video info with 48 coils

Why ? Good question !

I don't know. Different people come up with different ideas?

[lancaIV]

                                                            WHY ?

Lorrie Matchett is doing in his 3rd Generation video this question,decreasing Amperage - under load - condition related !

'ideas' are ever nice,to work out these to technical and industrial NORM-devices harder and financial more expensive ,we - as developper - have to pay for the official process !

Zero US$ Brubacker/Matchett ,800 US$ Indrawan ,1000 US$ chardi :only small fraction from

related 100 000 US $ minimum costs for each device the technical normation process ( included UAL or TUEV/DEKRA approval ) for legal using ( device selling,device use and grid connection )

Prototyping and study 75000 US$ for such small cheap devices + 25000 US$ UAL/TUEV/DEKRA technical approval

This is independent from purchase/availability  kind : gratis/donation - no profit- low profit - high profit/margin

When the technical device is the reazon for damages and/or injuries,the device producer/experimenter/ giver/ seller ( non/commercial )  is 100% for the losts responsible !
                         

                                      the social/economical/ecological target :


            absolute minimum      C.O.P. 10

in 20° Kelvin amplitude climate zones for 80 sqm living area ( conventional building )for 4000 W heat energy = 0° C outside and average 20° C room temperature

                                                     400 electric VA-/Watts spending

     If on-grid by energy-mix 400 EE-Watts x PE-factor 1,8 = 720 PE-Watts / 80 sqm = 9 PE-Watts/sqm
                           compared

About PE-factor : energy source dependent , can be 3 f.e. coal based electricity generation or 0 by renewables

Here ' 1,8 ' the german mix from nuclear + coal + gas + wind + water + solar + biogas



Nearly Zero Energy Standart : 20 PE-Watts/sqm                now in E.U. energetic new building  obligation !

- Passive House Energy Standart : 10 PE-Watts/sqm       in Ireland,E.U.-member,new building standart obligation !


                                             10/20 PE Watts ?
By electric heater or chiller this can be by Primary Energy Factor = PEF

based by coal = PEF 3,0 :

3,3 electric Watts/sqm consume as Passive House Energetic standart
6,7 electric Watts/sqm consume as Nearly Zero Energy Building standart

or
based by renewables = PEF 0,0
       
                                    theoretically ( no technical-mathematical  limit )

33/333/.... electric Watts/sqm consume as Passive House Energetic standart


67/670/.... Watts/sqm consume as Nearly Zero Energy Building standart

CONSTRUCTION STYLE FREEDOM AND LIBERTY IS BY ECOLOGIC VIEW AND SOCIAL ORDER UNIQUELY PE-FACTOR DEPENDENT,NOT CONSTRUCTION/INSULATION MATERIAL AND THICKNESS

Thermo-grafical house imaging and blower door teste are not ecology indicating !

  Only losts or consume leckage showing !  By PEF= 0,0 ecologic unimportant !





A PEF 0,0 energy source makes a 200 years old irish thermic uninsulated cottage easily to an 'up to date' energetic  'Passive House'


C.O.P. 10 x C.O.P. 10  cascade effect of heat/cooling systems decrease the house construction or energetic modernization costs  !


With C.O.P. 100x   a 1 cm thin  bubble foil tent gets energetic 'Passive House'-standart !


C.O.P. 10  x C.O.P. 10 x C.O.P. 10 cascade even more !




Up to 20° Celsius negative climate zone = 40 ° Kelvin amplitude  :

air/water heat pump DE3444610 and DE3212800 Rene Valkenburg

Hallowell acadia heat pump,technical concept 2020 ' open source'


                    Cold climate zone : - 20 ° Celsius strong winter peak

By 40° K amplitude the conventional 80 sqm building needs for 20° C average room-temperature up to 8000 W heat energy x PE Factor 1,8 =

                            14400 PE-Watts / 80 sqm x 10 PE-Watts/sqm Passive House maximum             = C.O.P. 18
                            14400 PE-Watts / 80 sqm x 20 PE-Watts/sqm Nearly Zero Energy Building max. = C.O.P. 9

MDI ( Monolith Dome Institute ) writes about US conventional construction building heat need max :1200 ft area ~ 112 sqm 12000 Watts ~ 10 W/ft or 107 W/sqm

Climate diagram Miami/Florida and Chicago/Illinois comparison ,related average seasonal temperature !
Doing a look : Colorado,Boulder : Dec. average low 21° F ~ 6,12 ° Celsius negative  Snow-man feelings ! 
Not far from Munich's 28° F in Dec./Jan. ! Wet or dry - windy or windstill ?


Passive House energetic standart = 90% less energy consume 107 W/ sqm versus 10 PE-Watts/sqm in the  US

with C.O.P. 100 x                                   99% less



Instead thermodynamic cycle devices also alternatively :

electro-dynamic devices,called " Resonator"

( ~ hot/cold Seebeck/Peltier/Thomson effect but with 90-99% Carnot-efficiency) :

Gerhard Beier,Helmut Reichelt,Joseph Yater as development pioneers


I have no physical and technical doubts about conventional air/air heat pump with seasonal average C.O.P. 3 to


improve to C.O.P. 12 and with Imris 2010 static generator C.O.P. ≥ 10 couple to reach an accumulated C.O.P. ≥ 100


state,



80 sqm living area air conditioning equipment, 20 ° Kelvin heat amplitude minimum satisfying  :
                                     4000 Watt peak

2 x 3000 W/ 10 000 BTU   heat pump with gear + magnet motor for C.O.P. 12 improvement

each 550 Euros ( motor with Inrush Current Limiter )

and nominal 1000 Watt Imris generator for 500 Euros

--------------------------------------------------------------------------------------------------------------------
total 1600 Euros/+- 1875 US$ for 80 sqm all seasons  air conditoning =

20 Euros( 23,5 US$)/sqm '(Ultra-)Passive House'- Standart costs

--------------------------------------------------------------------------------------------------------------------

( this clearly as mass production consumer end price,not for the prototypes : 300.000 US$ development costs for ready to commerce )

but I know that there is one less expensive way !








Idea : all seasons inflatable (translucent) bubble foil tent with C.O.P. 100 air conditioning ,                                                       
                                              24/365 glamping society


Apis Core,ICON,WASP                                                                                                3d-house printing
Polycare,Interbloc                                                                                                        stone block buildings
woodframe,butlerprojects,conics,bhb.sbg.at(candian block-house style)        wood house
Foldable portable building (Kalinowski),Power Profile Building,Leep Core       



Who pays more than 250 Euros/sqm home-kit* value will get in future R.O.I. losts !
* : Not Nearly Zero,not Net Zero : Zero Energy + Zero Water Building infrastructure equipped



From russian space-shuttle MIR to earth use : Jugend Forscht project,90' : Eberspaechter et al.
      portable 100 % closed cycle water system ( demo- prototype,TUEV-approved : 600 Liters per day )
                               600 liters/day compared


Home-mobile/Camper forum : as example one couple with 50 liter potable water consume ,for 5 days !                                                 5 liter per day and capita !


Flexibility : flyable ' inflatable bubble tent platform' !? Drone-technology incorporated

[lancaIV]

Which are the costs for a shelter/area cover/ tent ( ~ Yurte/Tipi-Igloo) in Colorado/USA ?
With air conditioning sourced by ' real overunity transformer' ?

archive.org  : www.shelterdomes.co.uk       shelter in dome-style based by bubble foil
When by 20° K amplitude 2000 Watts heat energy need then by 40° K 4000 Watts heat need for 25 sqm/ 270 ft
useable ground area ! 

40 ° K amplitude based by Boulder 21°F Dec. average minimum temperature !

The bubble foil dome-tent coating with OSMA Tech insulation coat ( ~ Insuladd / Radiance )and the maximum heat need we can expect with 2000 Wattp  !
     2000 Wp heat / 25 sqm = 80 Wp/sqm


2000 Wp heat by C.O.P. 5x IR heat pump concept ~ 400 W electric

2000 Wp heat by C.O.P. 10x Graphit Nano Plates heater ~ 200 W electric

2000 Wp heat by OSMA Tech heater ~ 300 W electric




Let us take the 400 W x PE-F 1,8 ( I mean similar in the US caused coal/nuclear mix) and  we get :
     720 Wp PE / 25 sqm ~   29 Wp PE/ sqm

With a ' real overunity transformer' C.O.P. 2x this shelter has in winter Nearly Zero Energy Building standart

                                                               C.O.P. 3x this shelter has in winter Passive House Energetic standart



shelterdomes.co.uk given shelter-dome production costs :                300 US$ each

Osma Tech coating we do calculate with  5 US$/sqm ground area : 125 US$

4 electric 500 W IR heat pumps with 100 US$ each :                            400 US$

'real overunity transformer' :                                                                          ?  US$


For nominal 750 Watt I calculate the Imris generator production costs ( 9 Kg device) with 300 Euros,so endconsumer would have to pay in minimum for ' open source'-condition but development costs including 450 Euros,net !
Compared conventional ' patent rights'-saved 500% average market margin price  : 1500 Euros,net

300 + 125 + 400 + 530 ( Euro to $) = 1355 US$/25 sqm mass production ' shelter kit' selling price

                                                                  ~ 55 US$/sqm

Under 50 US$/sqm  to under 40 US$ per square meter living area ,all inklusive : who makes it possible ?




After jovoto ' 300 US$ house '-competition now a ' 100 US$/sqm Zero Energy & Water building '- competition ?!





The UN would like to see cheap shelters,with habitants air conditionized comfort

This is a 'soft top'-dome shelter,
changing to hard top 'Burning Man'-hexapod or hexayurt  www.hexayurt.com
later to foam-igloo by Iglu-Village ,a german shelter inventor/Garmisch-Partenkirchen ~ Olympic Village 1972 'casanova'-modules by Peter Huebner

www.planetaryrenewal.org 1 US$/sqft   

When cubical a 20 sqm chamber has 65 sqm surface area ,as dome = x 0,7 ~ 45,5 sqm /0,093 ~
                          490 sqft surface x 1 US$ ~   25 US$/sqm living area material construction costs
WASP 'GAIA' 900 Euros for 20 sqm 3d house printing,jovoto 'geopolymer'-house sqm costs ?
New Mexico : Navajos : Adobe buildings ~ geopolymer construction

                              ancient technology and techniques

www.john-perlin.com about solar history ,

New Passive House movement - 'father ': Bo Adamson ,found in China and Portugal the promoting Ideal

Socrates architecture as Ideal for reconstruction  : St.George secondary school,Wallasey /Merseyside/England

' .... the first building in the world to be heated entirely by solar energy ....'  built 1961

[AreYouSure?]

Dear All,

This is a good info for all !!
I'm looking for all the designs and models of overunity transformers, I want to share the info I got from the results of the post before, you can see it here
https://youtu.be/ybzLpOypSDs
what is your opinion ?

Thank you

Best Regard

Is that real device?

[AlienGrey]

https://www.gaia.com/article/project-serpo-zeta-reticuli-exchange-program?utm_source=google+paid&utm_medium=cpc&utm_term=&utm_campaign=1-USA-DYNAMIC-SEARCH&utm_content=UFOs+&+Aliens&ch=br&gclid=CjwKCAiAv4n9BRA9EiwA30WNDwFVIKU9PttKHBy2BR7QuIpSGeaXp4wYSXd9h_HtZo8tRUsFzaI1RxoC81wQAvD_BwE