Is Lindsay?s ?SM? a fraud?

[innovation_station]

"You just apply a very fast pulse to a coil of high self-induction.  This causes the aether around the coil to polarize, then the pulse stops and the polarized aether suddenly depolarizes - this creates a shockwave in the aether, which causes it to move.  This in turn moves across your collector and induces an electric current along it.  An electric current can not maintain itself in a conductor so it must be utilized or it dissipates."

Grumps this is tesla / bedini, newman stuff its only 1st level tapping of BEMF type systems. All that does is pluck the magnetic earth flux which gives you 1.618 * Q but real switching loses mean you see only .323 RF gain yes RE = RF in extreme time compression return.   If you want REAL power like kilowatts streaming through you must open a permanent 3D portal. Its only when you do this the earth mag will come back with the entire global energy to plug the hole.  Thats why 100% tuned mag portal will come down and vaporise everything in 2 milliseconds.

There are 8 modes of power extraction.

i do not agree i have designed a device long  go based on this that i speek of that taps this from the earth and uses it sm could only mimic electlicly in a tpu as i understand   i can lock it indefnetally and speed it way up   to tune the damn thing   tap the free spinning feilds....

gyro effect you bet

ist

let me ask the question why is baling wire still required in this unit?? at present design?

lol

to contain the damm thing  trap it so it aint all over the place

i bet you need i high voltage oscolating  open ended curcuit to drive this puppy

enjoy

dont get me wrong im not knocking down any of sm's work this is what i have come up with.... in my reserch

[bolt]

its not hard you make constructive interference on all 3 planes XYZ  This creates a static standing wave in 3D is a big ball but it was generated from sine waves. Think of it as a hologram.

You need to make a dipole, you make magnetic amplifier of 2 triodes. The equivalent circuit is actually 2 back to back diodes this rectifies the charge between the collectors and pushes ONE positive and ONE negative.  As the 3D ball grows the earth will try harder to plug it and feed more energy into it. The more it pushes in the bigger the ball gets until such time the coil glows red hot and vaporises.

The results is high frequncy DC with AC component. The AC is the 3rd frequncy which is the heterodyne beat between the 2 collectors. This beat hetrodyne is what is felt in the tpu the slight vibration.

I quote you SM on this as im not making it up.

Think about the fact that in just one revolution, the Earth generates
enough electric power to supply North America with all it needs for over
100 years!
All we have to do is tap into that energy and all our energy wishes come
true.

Yes i know what you mean SM:)

Rotation of field. . . How many people think about that.
If you could have a field that you could think of as a big ball.
And you could rotate it in two directions what would the ramifications
be?

yes i know how to do that too.

[bolt]

Chef you tick 80 of 80 SM post with a valid explanation for each and everyone trust me i listen. Problem is within weeks of SM's postings people invented stuff that made no sense at all to the description. It became Chinese whispers where one person looked at the source then decided he couldn't deciphr it then made up NEW rules these became the HOUSE rules and they were followed instead. Eventually SM post were deemed deliberately false and thus not worthy of anything when in fact it was lack of knowledge which created a new false paradigm.

SM came back into the forum clearly pretty pissed off because he saw two years ago this happened.

This was mentioned again today.  "We couldn't work to SM rules so we tore it up and made our own".

They also have no concept of how important the control
frequencies are in order to make power from the collector.
It is obvious that most of the people trying to duplicate my experiment
are not of the intellectual caliper necessary to develop my technology or
at the very least they need to invest in some laboratory grade instruments
in order to develop any progress.
I assumed that anyone working on technology this sophisticated would
have a superior knowledge of electronics and an understanding of PURE
frequency output being a Necessity to control the reactions going
on inside the collector.
Please place this on the web site and let them know that if they do not
have a more then average understanding of electron flow then they
should not endeavor to try and duplicate my device because they do not
stand a chance.
I am tired of reading their disappointments because they do not have the
education or the knowledge necessary to duplicate my technology.
Sincerely,
SM

[turbo]

saturable reactor was almost certainly used for feedback control of the current loading. Its old technology and more proof that then TPU is using 80's technology.  They may be some twist where its required later but it shouldn't stop real proceedings in the meantime moving forwards and doing the precise stuff SM said that should be done.

They were almost certainly used for feedback?
How certainly is almost certainly??

They were certainly used to compress the pulse....ever tried to compress a sine wave....??

Marco.

[turbo]

This was mentioned again today.  "We couldn't work to SM rules so we tore it up and made our own".

Are you going to repeat the whole SM story in parts?
I have tried that already man.

And we did not make our own rules.
Stevens units were carefully pulled apart when they were eventually sold.
How's that for a surprise?
Don't you think it's kinda stupid to assume these units are still in electrical tape today??
After 12 Years.....
Maybe you should try to get your ass closer to the fire in stead of keep digging in the old soup.
Be carefull it doesn't burn you.

Marco.