Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



LaFonte Group can turn off permanent magnet without work

Started by Paul-R, March 03, 2010, 06:31:34 AM

Previous topic - Next topic

0 Members and 22 Guests are viewing this topic.

Print
Go Down Pages 1 ... 10 11 12 13 14 ... 41
User actions

mscoffman

#55
March 24, 2010, 01:32:25 PM
Hi, Butch;

Any chance that this could be retrofited into an existing
automobile alternator coil and body for experimenting?

---

I think it will have less energy density per weight and
unit volume then normal generators...but with a
distinct advantage.

Where is Mr. Tesla in all of this...He said there was another then
current unknown "wheel" in electrodynamics, one that could enable
free energy...But he didn't say one could achieve it by adding
a metal ring into the rotor position of one of his generators.

:S:MarkSCoffman

Butch LaFonte

#56
March 24, 2010, 04:04:28 PM
Hi guys, I will be back in about three or four hours to answer any questions and reply to comments, But in the mean time I wanted to mention something. The switcher is a product of 5 people's work, Myself, Mark, Nicolas, Lawrence and Bruno. It's being referred to as the LaFonte Switcher but it is really the LaFonte Group Switcher.
I don't want all the credit to get attached to me. We work as a team and everyone has stuck with me through all the designs that did not work and I am very lucky to have such a great team. We don't know how many machines we built that might be overunity because we ran out of money before R&D could be completed. Mark has a storage trailer full of our prototypes. Maybe someday we will have the funds to complete the R&D on all of them. There are close to 2000 designs on paper. Maybe with the success of the switcher we can build them all.
Back in several hours,
Butch

Bruce_TPU

#57
March 24, 2010, 07:33:58 PM
Hi Butch,

I have a little different way than Stephan.  Simply leave out the activated charcoal.

My iron oxide was purchased on Ebay...very cheeply!  LOL

I hope this helps:

DIY:
http://www.youtube.com/watch?v=hnY1Zbi7sgM

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Butch LaFonte

#58
March 24, 2010, 10:16:43 PM
Quote from: Bruce_TPU on March 24, 2010, 07:33:58 PM
Hi Butch,

I have a little different way than Stephan.  Simply leave out the activated charcoal.

My iron oxide was purchased on Ebay...very cheeply!  LOL

I hope this helps:

DIY:
http://www.youtube.com/watch?v=hnY1Zbi7sgM

Cheers,

Bruce
Bruce, Could I ask a favor of you? Could you put the leads of an ohm
meter about an inch apart into a pile of iron oxide to see what the
resistance is? This is without the charcoal.
Thanks, Butch LaFonte, The LaFonte Group,

Bruce_TPU

#59
March 24, 2010, 11:11:59 PM
Quote from: Butch LaFonte on March 24, 2010, 10:16:43 PM
Bruce, Could I ask a favor of you? Could you put the leads of an ohm
meter about an inch apart into a pile of iron oxide to see what the
resistance is? This is without the charcoal.
Thanks, Butch LaFonte, The LaFonte Group,


Hi Butch,

It oscillated between 10 and 11 M   ohms.

I hope that helps you out.

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 10 11 12 13 14 ... 41
User actions