Pulsed DC Transformer with Embedded Magnets

[bille]

lets think out of the box!
if we turn the coil or coils and magnets into some kind of resonance. lets turn it into an oscillator,
and not something we are trying to resonate from some some external source. the only input is a voltage, a feedback source, and an on/off switch. Its easier to work with higher freq. because the
components become smaller. Remember a n oscillator has a method of feedback which is out of phase with the input ,say 90 degrees and that is enough to sustain oscillations. and dont forget that resonance occures when xL=xc

[Paul-R]

lets think out of the box!
if we turn the coil or coils and magnets into some kind of resonance. lets turn it into an oscillator,
and not something we are trying to resonate from some some external source. the only input is a voltage, a feedback source, and an on/off switch. Its easier to work with higher freq. because the
components become smaller. Remember an oscillator has a method of feedback which is out of phase with the input ,say 90 degrees and that is enough to sustain oscillations. and dont forget that resonance occurs when xL=xc

This is intriguing stuff. You have in mind feedback from the secondary to the primary, presumably having kicked the thing off with an external supply which gets disconnected.

Don't forget that this is essentially a power device; it should be heating our homes next winter. And so the dimensions and components need to bear in mind the amps.

[bille]

Please help me with this idea!
I have two black boxes out there.

Input-------------> #1------->  #2-------Output------/
             ^-------------------------------------------/


The energy around us goes into box #1, say one unit and that energy goes into box #2.
1 unit . That one unit of energy goes back to the input, 1 unit. Where do I find the free energy to collect more free energy.

Thankyou
Bille

[ltseung888]

Please A with this idea!
I have two black boxes out there.

Input-------------> #1------->  #2-------Output------/
             ^-------------------------------------------/


The energy around us goes into box #1, say one unit and that energy goes into box #2.
1 unit . That one unit of energy goes back to the input, 1 unit. Where do I find the free energy to collect more free energy.

Thankyou
Bille

Please read the first attached file in reply 214.  Focus on Figure 1 and Figure 2.

[NerzhDishual]

Hi FLEET admirals,

Just a little story...

I have built a (slightly  modified) Gadgetmail's joule thief circuit.
It works. It can light the 4 leds while charging a secondary bat.
I swapped the input bat and the output bat and could (almost) recover the
initial configuration (batteries voltages-wise) but during this time
the leds were lighted.
Is it 'OU'? I dunno. It should be about 99% efficient.
I will made a web page with my measurements.

*BUT*
I have not been able to reproduce this circuit! My own setup.
It simply does not work.
Yes, the 4 leds are lighting but when I plug in the charging bat they
turn off and the charging effect does not appear.

With the first building I should have stumbled upon some resonance effect.

*SO*
Please don't be upset if you do not succeed to reproduce any (claimed) OU device
and do not too quickly accuse the inventor of fraud...
You, perhaps,  just not (momentally) have the MOJO.

My new Motto: OU Needs MOJO !
http://en.wikipedia.org/wiki/Mojo

Very Best