Pulsed DC Transformer with Embedded Magnets

[tagor]

and this one

This is one of the FRG series of low temperature TAR resonators (Model TAR1999). It amplifies the acoustic wave by 400%, with a thermal efficiency of 23%. The thermal input is 60 Watts from an electric cartridge heat element, the acoustic input is 4 Watts and the AC electrical output is 15 Watts at 3460 Hz, using air as the working fluid, at 4 atm. pressure.

[ltseung888]

How about you make a VIDEO of your working device so you would get much more attention to all this. It would be much more believable and inspiring than a couple of edited photos. I wanna see input side and output side phases of voltage vs current in real time.
You have never delivered any solid proof nor any of your "buddies" did.

Minde

Thank you for the suggestion.  I personally purchased 6 oscilloscopes (3 sets) when I was in Hong Kong.  One set is with Dr. Raymond Ting, one set is with Tong Po Chi and another set is with Aaron Quant.  Any of them can produce the video with working prototypes.  They all can build the FLEET prototypes from scratch.

Before I left Hong Kong, the strategy was to work with Hong Kong University.  Thus we ran two workshops there.  The professors would like to do a thorough academic evaluation.  They already warned us that the evaluation process will take months if not years.  They are afraid of being labeled “working on the impossible perpetual motion machine”.

We discussed the issue of producing a video at that time.  The feeling was that any video could be edited and accused as a fake.  The oscilloscope experiments cannot possibly lie.  The plan is to get one or more reputable Organizations in USA to verify the results with their own oscilloscopes.  That will be much more conclusive.  TV stations will do full programs and there will be no doubt on the validity of the Lead-out or Bring-in Energy technology.

Now we have the US Government (via Maj. Todd Hathaway) starting to get involved.  I fully expect that the many top Universities will join in.  The feeling from my team is that if Stanford, MIT or UCLA in USA come out and verify the results, the World will accept the technology.  The Hong Kong University Professors agreed to that. 

I expect Dr. Steven Chu, the US secretary of Energy, will get involved at some suitable stage.  Thus I brought eight working prototypes to USA.  With my presence in USA, any number of working prototypes can be built.  Hunting for resonance is tricky but with an experienced hand who has done dozens before, it is not an impossible task.

May be that is the reason that the Almighty sends me to USA.

[minde4000]

....  The feeling was that any video could be edited and accused as a fake.  The oscilloscope experiments cannot possibly lie.  The plan is to get one or more reputable Organizations in USA to verify the results with their own oscilloscopes.  That will be much more conclusive. 

Pictures could be easily faked - videos require much more effort. Also we need to see ALL AT ONCE that means 100% of your device + wiring + probes/probe wires and scope screen text MUST be visible at all times. A single wire coming off of the screen will cause doubts and unecessary talks.

This is the way every device should be represented to general public in case of inventor is sincerely willing to share info educate and help others.

Devices with bunched up/or partially visible wires coming out from everywhere helps little...

Minde

[XS-NRG]

Lawrence is a CLOWN 

he no gonna show anything he just keep talking masturbating at steven mark fame video thinking he will be the same one day and stealing other people inventions like he got something to do with it.

CLOWN.

[pese]

look at the

THERMOACOUSTIC RESONATOR (TAR)

http://www.io.com/~frg/history.htm

So ts need 64 Watts to receive 15 Watts?

If the "Amplifier" need 60 watt heat energy
to transfer this additionalle to the Input, i see
not an sense...

The 60 bWats thermal energy will be lost
to become the output of 15 watts
Pese