Kapanadze Cousin - DALLY FREE ENERGY

[NickZ]

   conico:   I don't think that those caps are the same as what I have. I paid almost $30 each for them.   My 0.47uf, 2000v is 1 1/2 inch, by 3/4 inch, by 1 1/4 inch in size. And I think that the ones shown are not that same size.   Some guys use two of them, or more for the induction circuit.
    Alien:  I've already mentioned and have shown at what frequency the inductor should be running at. Mine runs at about 18 or 19KHz. So does the 28t coil/grenade output coil. Both inductor and output coil are running at the same frequency. Unless you use different caps. I use the recommended caps. What the inductance is, I don't know. But, I made my coils to the specs.My kacher is running at 900KHz to 1.2MHz, on 24v.

[kolbacict]

https://www.overunity.de/community/
Hello everybody. And what is it, and is it related to our site?

[AlienGrey]

   conico:   I don't think that those caps are the same as what I have. I paid almost $30 each for them.   My 0.47uf, 2000v is 1 1/2 inch, by 3/4 inch, by 1 1/4 inch in size. And I think that the ones shown are not that same size.   Some guys use two of them, or more for the induction circuit.
    Alien:  I've already mentioned and have shown at what frequency the inductor should be running at. Mine runs at about 18 or 19KHz. So does the 28t coil/grenade output coil. Both inductor and output coil are running at the same frequency. Unless you use different caps. I use the recommended caps. What the inductance is, I don't know. But, I made my coils to the specs.My kacher is running at 900KHz to 1.2MHz, on 24v.

The 220 nf version at 1250 volt version were only a 10th of that price from wima Germany i just use 4 of them to make up the correct value and potential

it's a shame it doesnt work  )the device not the caps). My other half wanted to sling it all a few weeks ago No room for junk

Another thing my internet provider in UK doesn't like me on youtube and this subject calls iot ilegal activity, if any thing hapens to me there is no wat I would
comit harry carry it's them illiminate deciples and greed.

See ya!

[NickZ]

    The 220nf is not the same. 0.47uf 2000v is what is called for, or even two of them. Not a bunch of little ones.    You can hear the spark when Ruslan shorts them out. Bang, like a small firecracker. Can your set up do that???  NO.   The Kacher is putting out 5000v, the cap you mentioned top out at 1250v, the rest of the voltages, are lost.

[AlienGrey]

    The 220nf is not the same. 0.47uf 2000v is what is called for, or even two of them. Not a bunch of little ones.    You can hear the spark when Ruslan shorts them out. Bang, like a small firecracker. Can your set up do that???  NO.   The Kacher is putting out 5000v, the cap you mentioned top out at 1250v, the rest of the voltages, are lost.

Five thousand volts from the yoke, no way! even 5kv on the katcher maybe but you need 20kv ceramic for that job..

but with sine wave thats only DC to DC and if you use caps on a square wave you lose the efect  and Wima caps are same speck.

remember the days at school an old speaker matching tranformer wired arse about face and a 3 volt battery had some kich with a mores code tapper
they would line up a buch of kids and see how many they couldf shock with it .