Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Proof of concept - perturbing a static magnetic field

Started by bob.rennips, May 30, 2007, 12:57:25 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

Print
Go Down Pages 1 ... 18 19 20 21 22 ... 25
User actions

Bruce_TPU

#95
June 24, 2007, 02:19:43 PM
@ Bob.R

The Story told to me WAS of Sound waves, from a earphone placed on a wire input.  It produced massive ammounts of electricity!  The earphone was plugged into an FM radio.  All of this was BEFORE brnbrade posted last night.  he wired direct to his headphone output and did not use the same method to produce the waves.  :)

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

brnbrade

#96
June 24, 2007, 03:00:24 PM
 Hi btentzer

I make little moving demonstrate my experiment concept.

Tks

Thedane

#97
June 24, 2007, 03:19:18 PM
Quote from: brnbrade on June 24, 2007, 03:00:24 PM
Hi btentzer

I make little moving demonstrate my experiment concept.

Tks

Hi brnbrade,
Your video shows an analogue meter where the needle follows the music - and not much more.
(To me it also looks like you're taking the output from your stereo and channels it through a transformer - something that is NOT even close to unity.)

May I ask which concept it is that you're trying to show?

//TheDane

brnbrade

#98
June 24, 2007, 03:54:08 PM
Quote from: Thedane on June 24, 2007, 03:19:18 PM
Quote from: brnbrade on June 24, 2007, 03:00:24 PM
Hi btentzer

I make little moving demonstrate my experiment concept.

Tks

Hi brnbrade,
Your video shows an analogue meter where the needle follows the music - and not much more.
(To me it also looks like you're taking the output from your stereo and channels it through a transformer - something that is NOT even close to unity.)

May I ask which concept it is that you're trying to show?

//TheDane


//TheDane

Yes. Here anything of more for the moment.
The one that I wanted to show as the sound waves balances.
That inside of the one of my device also scale.
And it is known that a magnetic field varying in the time generates energy.
How yes, so fast the primary ones to balance the secondary ones they collect more energy.
It is it that me leaning of that everything.

http://www.youtube.com/watch?v=Y6UTQLRW9bs&mode=related&search=

regards

Bruce_TPU

#99
June 24, 2007, 04:15:11 PM
Hi Brnbrade,

You are right.  The voltage fluctuates with the beat oscillations of the station.  I just finished hooking up stereo wires from a headphone output of an FM radio to a transformer.  WAS NOT looking for OU, before everyone floods me!  LOL 

I noticed some weird things.  At the bottom of the FM dial there was .001 readings, nothing there.  I hit 101 on up and things looked better with readings between .8 mv and 1.2 volts.  I then did a little mobius loop from outputs to inputs with diodes to input the feedback and got it up to between 6 and 7 volts.  So the faster the pulse of this wave I think the more power will be generated in the proper circuit potential, with the correct frequencies.  Also, as I adjusted the gain it had a direct affect on voltage output.

Remember what SM says about the TPU?
"You can begin to collect the current and dissipate it with no need for
amplification because the signal source also becomes the feed for
the power source and has the natural tendency to run with gain.

Brnbrade, what size pvc did you use to wrap your wire?  We would like to try to repeat what you have done.  Have you tried it again today?

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 18 19 20 21 22 ... 25
User actions