Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



The Brnbrade Coil/Overunity?

Started by Bruce_TPU, July 01, 2007, 12:14:40 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages 1 ... 6 7 8 9 10 ... 116
User actions

supersam

#35
July 01, 2007, 06:16:45 PM
hi all,

am i misinterpreting something or reading something into this from another thread that bruce was posting on.  the thing that caught my eye was the idea of basically trappong the bmef between two diodes.  is that right or what?  once the diodes trap the bemf then it suddenly spikes and is trapped until the second coil is shorted. then the output which was 1.5 volts dc in is suddenly 52 volts ac on the second coil. 

"DAMN THE (AMP) TORPEDOES, FULL SPEED AHEAD!"

lol
sam

ps:  shuttin up shuttin up.

Bruce_TPU

#36
July 01, 2007, 06:30:04 PM
Quote from: supersam on July 01, 2007, 06:16:45 PM
hi all,

am i misinterpreting something or reading something into this from another thread that bruce was posting on.  the thing that caught my eye was the idea of basically trappong the bmef between two diodes.  is that right or what?  once the diodes trap the bemf then it suddenly spikes and is trapped until the second coil is shorted. then the output which was 1.5 volts dc in is suddenly 52 volts ac on the second coil. 

"DAMN THE (AMP) TORPEDOES, FULL SPEED AHEAD!"

lol
sam

ps:  shuttin up shuttin up.

@ Sam
bob.R's thread is the info about the diodes. 

@ Rich
Great idea!  LOL  none of us thought of that.. I sent brnbrade the message.  We will see.

@ All
Regardless the outcome of this thread, be thinking, "opposing identical signals/different sources, slightly out of phase, one from the other."

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

EMdevices

#37
July 01, 2007, 07:02:57 PM
Very interesting developments !!!

EM

supersam

#38
July 01, 2007, 07:27:53 PM
bruce,

sorry for the confusion. on my part, but does this possibly have something to do with brnbrade's device, or his results?  are there capaciteance issues?  what frequency ac are we seeing?  how many watts is the stereo putting out? what is the max output of the stereo unit, and where waws the volumn set?  gosh i wish i was there live!  it is looking like everytime i'm not i may be missing history in the making!

KEEP UP THE GREAT WORK!!!  and get back to my stupid questions when you can.

lol
sam

ps:shuttin up shuttin up.  if i can

Bruce_TPU

#39
July 01, 2007, 07:50:44 PM
Quote from: supersam on July 01, 2007, 07:27:53 PM

sorry for the confusion. on my part, but does this possibly have something to do with brnbrade's device, or his results?  are there capaciteance issues?  what frequency ac are we seeing?  how many watts is the stereo putting out? what is the max output of the stereo unit, and where waws the volumn set?  gosh i wish i was there live!  it is looking like everytime i'm not i may be missing history in the making!


Hi Sam,

Yes, this thread was made on behalf of brnbrade who asked that I assist him.  His English is not the best, and he is a youth.  So I promised to assist any way possible.

I do not know if brnbrade ever saw the patent talked about by Earl and Jason.  He can answer that.

Watts the stereo is putting out is a good question.  We have no answer at this time.  I measured the voltage on mine sometime ago when I tried to build his coil about a week ago.  At full volume, the voltage was about 235 mv. 

Frequency AC is a good question. 

Where was the volume set, unknown.  I asked that also, we will see.

If someone/anyone could post what type and size of wire they think the thin braided primary is, that would be helpful for replication.  It looks to be easy to replicate. 

Earl gave a drawing.  There is a speaker magnet on end behind the coil.  Wrap 12awg solid first.  number of turns on the first post.  Directly on top of the large wire, wrap the thin primary.  He had said 1000 turns on another thread.  yesterday he just said, until the wrapped wire is equal to the diameter of the air core.  Mobius twist on both ends, of primary to opposing secondary.  Two coils are needed of course.
56volts AC, with no oscillations
250volt AC with.

2 1.5volt batteries.

Cheers,
Bruce

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 6 7 8 9 10 ... 116
User actions